Light technology - Import export

The compact video endoscope systems from Micro-Epsilon Eltrotec present the optimum solution for your mobile application. The modular system has a wide range of probes with different diameters and working lengths as well as camera and light technologies. This results in a huge spectrum of configuration possibilities.

Statox 501 Infratox detects gases in the LEL and ppm range. Protecting people and assets from hydrocarbons The infrared absorption method of gas detection is ideal to detect hydrocarbons such as fuels. It features enough sensitivity to expand the range of application into the ppm range. For instance fuels such as gasoline, diesel or kerosene are mixtures of hydrocarbons. Infrared gas detection theory of operation Some gases absorb light at a certain wavelength (colour). This absorption band is specific to the gas. The rate of the absorption depends not only on the substance to be detected but also on the number of gas molecules (i.e. the concentration of the gas). This premise is used to detect gases. For example, the C - H bond in hydrocarbon molecules will oscillate and absorb light at 3, 4 mm. This fact makes it so easy to detect fuels. Hexane, for instance has 14 C - H bonds compared to Methane which has only 4! A light beam is directed through a cuvette filled with the gas to be detected. The more hydrocarbons are present, the more light will be absorbed. A photo detector at the other end of the cuvette measures the remaining light intensity. The difference between the original and remaining light intensity corresponds to the gas concentration. A reference beam with a different wavelength compensates for potential interferences of dust, humidity or variations of intensity from the light source. Fail-safe technology Failure of important components such as the light source or photo detector will trigger a "system fail" alarm. Most local authorities will accept this as a self-diagnostic feature. Systems including a self-check require less maintenance and calibration, saving time and money. Simple maintenance: Easy to read display and non-Vintrusive calibration The bright LED display of the Statox 501 Infratox shows the gas concentration in percent L.E.L. (Lower Explosion Limit). An important accessory is the calibration adapter, featuring control buttons operating Hall-sensors inside the Ex d housing. The service menu is password protected preventing unauthorised access. All parameters can be checked and changed, or a calibration can be done all without opening the transmitter. The adapter is also equipped with a gas outlet so that it can be used for flow-through applications. Impervious compact design The dimensions of the Statox 501 Infratox are small and compact. The sensor compartment is completely sealed, not allowing dust or insects to enter. It is located in the center of the sensor head. This allows heat radiation from the electronics and the infrared lamp to keep the unit a few degrees above the ambient temperature thus avoiding condensation. This innovative design makes any additional heating unnecessary, allowing the sensor head to be very energy efficient. This saves additional money by eliminating more expensive wiring and a bigger power supply that would otherwise be necessary. The sensor head is rated protection class IP 67 (6 = protection even against fine dust, 7 = submerged 1 m deep in water for 30 minutes). You can have confidence that this system will safely operate even in the harshest environment.

Bi-technology sensor light meter for high quality solar VIS measurements. Features: Weatherproofed, high spectral resolution, short measurement time, entrance optic with diffusor for irradiance and spectral irradiance, etc.

Bi-technology sensor light meter for high quality solar UV measurements. Features: Weatherproofed, high stray light reduction (comparable double monochromator), high spectral resolution, short measurement time, entrance optic with diffusor for irradiance and spectral irradiance, etc.

Bi-technology sensor light meter for high quality UV measurements. Features: Low stray light, 190 nm bis 430 nm, short measurement time (electronic shutter), Trigger input and output, entrance optic with diffusor for irradiance and spectral irradiance, etc.

Bi-technology sensor light meter for high speed LED binning. Features: High spectral resolution, short measurement time (electronic shutter), high dynamic (filter wheel) and cooled chip, Trigger input and output, entrance optic with light guide adapter, CCT, CRI, color values, etc.

Bi-technology sensor light meter for high speed LED binning. Features: High spectral resolution, short measurement time (electronic shutter), high dynamic (filter wheel), Trigger input and output, entrance optic with light guide adapter, CCT, CRI, color values, etc.

Bi-technology sensor light meter for high speed LED binning. Features: High spectral resolution, short measurement time (electronic shutter), high dynamic (filter wheel), Trigger input and output, entrance optic with diffusor for illuminance and spectral irradiance, CCT, CRI, color values, etc.

Bi-technology sensor light meter for high speed LED binning. Features: High spectral resolution, short measurement time (electronic shutter), high dynamic (filter wheel) and cooled CCD, Trigger input and output, entrance optic with diffusor for illuminance and spectral irradiance, CCT, CRI, color values, etc.

Bi-technology sensor light meter for high quality UV measurements. Features: High stray light reduction (comparable double monochromator), 190 nm bis 430 nm, short measurement time (electronic shutter), Trigger input and output, entrance optic with diffusor for irradiance and spectral irradiance, etc.

High-flexible round strands and ropes made from Cu-ETP1, Cu-OF1, aluminium and LEONI Histral® alloys (upon request) in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 630 mm² (bigger cross-sections upon request). High-flexible round strands and ropes are mainly suitable for earthing straps, connectors, conductors for low-voltage lighting and for welding technology.

workplace light with a special reflector technology: Highly effective task luminaire light with a very uniform illumination of the workplace. The high quality light for working places and inspection tables with a very efficient reflector system makes an very homogen light on the table. You will have an very good color spectrum >RA85 and an light color of 5000K. robust machine light: machine light and general light with high light output. Using for machine lighting and industrial vision systems. The have no IR and UV spectrum. signal lights according to customer specification: edge light systems and border illumination: lightpanels for border illuminations. The LEDs are not situated in the lighting area itwelf but below the unlighted edge. The light of the LEDs will be injected into the border of a flat light conductor and uncoupled equally via a calculated dot matrix system. This technique comes originally from the premises of planistar. The dot matric course are sitll being calculated from us an manufactured ba very precise UV print machines. The main advantage of this system ist the hight constancy o fhte illumination area also for a long period of time. An unequal aging or unequel brigntness's of the particular LED ships will be distributed through the light conductor in the shortest distance.

Special application ELKY offers customer-oriented individual solutions for a wide variety of purposes. ELKY offers customer-oriented individual solutions for a wide variety of purposes; we deliver to the - Lighting technology (holding, tensioning, securing elements) - Equipment technology (telescopic pull-out safeguards) - jewelry industry Tell us your application and your specification and we will develop and manufacture a tailor-made product based on our production spectrum.