Impregnation - Import export

Suitable for transparent universal impregnation to protect absorbent mineral surfaces such as, exposed aggregate concrete, terracotta, natural and artificial rock, granite, brick wall, hard stone, stair stone and for hydrophobing.

Suitable for transparent, universal impregnation for protecting against moss, algae and lichens. This inhibits the entry of dirt, oils and grease. Terrace and Gravestone Impregnation can be used on absorbent, mineral substrates such as exposed aggregate concrete, terracotta, natural ans artificial stone, granite, brick walls, hard rock, stone stairs and gravestones.

Suitable for wood outdoors (garden furniture, facades, balconies, fences, doors, windows, gates, beams, ceilings), cork as well as clay and cotto surfaces. Water Proofer offers long-term protection against moisture of any kind and impregnates while invisible to the naked eye.

Suitable for impregnation of WPC (Wood-Plastic Composites), as well as Resysta and synthetic rattan. WPC Impregnation is a solvent-free, transparent impregnation suitable for any WPC surfaces. Our product is made from natural oils, impregnates WPC surfaces open-pore, makes them weather-resistant and increases resistance against UV-rays.

Suitable for any wooden construction (only outdoors) without ground contact (wooden cladding, windows, sills, garden houses, timber frame, garden furniture, balconies, wooden truss, doors, gates), that are to be treated decoratively with glaze, paint or varnish (not suitable for oak or hardwood). Impregnation Primer W210 is prophylactic against blue stain and rot. Our product improves the durability and adhesion of subsequent coats especially on highly absorbent substrates or those with varying degrees of absorbency. The coat is nearly odorless, completely odorless even when dry and it dries quickly. The coat slightly raises the grain, fills the wood pores and can be sanded easily.

Suitable for impregnation of WPC (Wood Plastic Composites), and Resysta and synthetic rattan surfaces. WPC-Impregnation evolution is a water based, transparent impregnation which is suitable for any WPC surfaces. Our product is made from natural oils, impregnates WPC surfaces open-pore, makes them weather-resistant and increases resistance against UV-rays. Effective defrosting agent for outdoor areas due to active, moisture-regulating surface.

Suitable for any impregnated, especially pressure treated, garden wood and garden furniture, like fences, carports, pergolas, plant troughs and sandboxes. Bio Wood Care Oil prevents graying of impregnated wood, refreshes color and protects and nurtures treated wood.

Carbonfiber with special impregnation and siliconfree dynamic high performance lubricant Practical useful application data: max. temperature: +250 °C max. pressure centrifugal pumps: 25 bar Characteristics Strong against abrasive mediums, yet low friction on shaft surface. Recommended shaft/sleeve hardness HRC 45 Volume stabile, minimal shrinkage, good heat conductivity Suitable as bullrings Operating range Pressure [p max]: 30 bar, Velocity [v max]: 25 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +300 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +250 °C max. pressure centrifugal pumps: 25 bar Main application Boilerfeed pumps Refiner Suitable for Chemical industry Pulp and paper industry Power plant technology Boiler houses Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1...

Polyimid Fiber with PTFE Impregnation and Silicone Run-In Lubricant Practical useful application data: max. temperature: +180 °C High fatigue strength and flexibility Good acid resistance High cross section density through PTFE blocking agent, good for crystallizing media Recommended shaft surface hardness: HRC 35 Good pliability, therefore perfect adaption of uneven shaft surfaces Operating range Pressure [p max]: 20 bar, Velocity [v max]: 15 m/s Pressure [p max]: 60 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 0 - 12 Density: 1.30 g/cm³ Practical useful application data: max. temperature: +180 °C Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Sugar industry Pulp and paper industry Mining Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on...

Synthetic Fiber with PTFE Impregnation and siliconfree dynamic Run in Lubricant Practical useful application data: max. temperature: +180 °C Characteristics High fatigue strength and flexibility Good acid resistance (e. g. hydrofluoric acid 15 % / 50 °C) High cross section density through PTFE blocking agent, good for crystallizing media Recommended shaft surface hardness: HRC 35 Good pliability, therefore perfect adaption of uneven shaft surfaces Operating range Pressure [p max]: 20 bar, Velocity [v max]: 15 m/s Pressure [p max]: 60 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +280 °C pH: 1 - 13 Density: 1.35 g/cm³ Practical useful application data: max. temperature: +180 °C Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Sugar industry Pulp and paper industry Mining Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes...

Para-Aramid Fiber Packing with PTFE Impregnation and Run-In Lubricant­ Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High cross section density through PTFE blocking agent, which protects against penetration of crystallizing media Excellent value for money Good resistance against wear, with abrasive and hardening mediums Recommended shaft surface hardness: HRC 50 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.20 g/cm³ Practical useful application data: max. temperature: +200 °C Haupteinsatzgebiet Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Power plant technology Waste water technology Mining industry Variant Square shape P7 Form of delivery This packing can be manufactured in...

Carbon Staple fiber with special Graphite Impregnation and silicon free Run In lubricant Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High Cross section density due to special impregnation Excellent Value for money Graphitized all-round packing with Emergency run Capabilities Good wear resistance against abrasive and crystallizing products Recommended shaft surface hardness: HRC 45 Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.15 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Valves Mixer Kneader Agitators Suitable for Chemical industry Pulp and paper industry Waste water technology Community facilities Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes...

Carbonized synthetic fiber with PTFE impregnation and run in lubricant Practical useful application data: max. temperature: +140 °C Characteristics Good flexibility Rot proof Form stable packing Good value for the money Recommended surface hardness HRC50 Operating range Pressure [p max]: 15 bar, Velocity [v max]: 15 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +200 °C pH: 3 - 12 Density: 1.30 g/cm³ Practical useful application data: max. temperature: +140 °C Main application Centrifugal pumps Mixer Kneader Agitators Refiner Autoclave Gate valves Filter Suitable for Pulp and paper industry Sugar industry Waste water technology General maintenance Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg...

Synthetic Fiber Packing with PTFE Impregnation and Run-In Lubricant Characteristics Elastic and pliable Recommended shaft surface hardness: HRC 50 Resistance against rotting Structural stability Cost effective Operating range Pressure [p max]: 15 bar, Velocity [v max]: 12 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Temperature: t = -50… +140 °C pH: 3 - 12 Density: 1.30 g/cm³ Main application Centrifugal pumps Mixer Kneader Agitators Refiner Autoclave Gate valves Filter Suitable for Pulp and paper industry Sugar industry Waste water technology Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 4 48.1 5 [3/16"] 30.8 6 21.4 6.4 [1/4"] 19.1 8...

High purity Carbon Fiber with cross section impregnation and run in lubricant­ Practical useful application data: max. temperature: +250 °C Characteristics Excellent Standardisation features Cross section impregnation avoids the penetration of crystallizing mediums Wear resistant against abrasive products and with minimal coefficient of friction Self lubricating fiber with high Carbon content, reduced shaft wear and excellent heat transfer characteristics Thermally balanced construction, the coefficient of expansion is similar to steel, the packing is volume stabile and does not shrink. Therefore minimal re-adjustment needed after installation. Excellent chemical resistance Recommended shaft surface hardness: HRC 45 Operating range Pressure [p max]: 30 bar, Velocity [v max]: 25 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +300 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +250...