Formed sheets - Import export

Formstable biaxially expanded ePTFE sheets or die cutted gaskets Characteristics Excellent adaption High blow-out resistance No cold flow Chemically inert Technical parameters pH 0 - 14 Temperature: t = -200 … +280 °C Pressure: p = Vacuum … 200 bar Density: 0,95 g/cm 3 (D11 - 0,7 g/cm 3) Minimum Surface pressure: VU (40 bar; 0,01) = 26 Mpa Maximum Surface Pressure: VO = 150 Mpa Minimum surface pressure in operation: BU < 5 Mpa Cold upset compression value: KSW = 40 % Remaining Thickness after compression approx. 15 % higher than values of D11. Main application Flanges Vessels Lids Joints Narrow flanges Bigger uneveness Tension sensitive components (e.g. sight glasses) Suitable for Chemical industry Food industry Maintenance Approvals DIN 28090-2 TA Luft 1,5 · 10 -8 mbar · l/(s·m) @ 250 °C FDA conformity EG 1935:2004 EU 10/2011 Form of delivery Sheet dimension: 1,000 x 1,100 mm and 1,500 x 1,500 mm Sheet gaskets thicknesses: 0.5 / 1.0 / 1.5  / 2.0  / 3.0  / 4.0 / 5.0...

High temperatur sheet gasket from expanded graphite with stainless steel foil reinforcement Characteristics One layer of 0.05 mm stainless steel carrier (3 mm thickness 2 layers) with graphite on both sides fixed by a special only 10 µm thick adhesive coating. Purity 98 % Practically no cold flow or creep under temperature Excellent in use at cycling temperatures Very good sealability even at low gasket stress. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 40 bar Main application Suitable for sensitive flange connections Housings of pumps and fittings Suitable for In all industries Approvals BAM DVGW Variant Economic grade alternative D 5.2 with 0.05 mm stainless steel foil reinforcement Form of delivery Gasket sheet size of 1,000 x 1,000 mm in der Dicke 0.55 / 0.75 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards. Special dimensions on request.

Sheet gasket from expanded graphite with tanged stainless steel foil reinforcement Characteristics Graphite gasket reinforced with a 0.1 mm tanged stainless steel insert and a purity of 98 %. Practically no cold flow or creep under temperature Excellent in use at cycling temperatures High blow out safety Built in safety against assembly and operational problems. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 100 bar Main application Robust graphite gasket applicable in all industries and as well approved to seal older equipment. Suitable for In all industries Approvals BAM DVGW FIRESAFE Variant Economic grade alternative D 5.1 in 0.1 mm 316 tanged stainless steel sheet reinforcement Form of delivery Gasket sheet size of 1,000 x 1,000 mm in thickness of 1.5 / 2.0 /3.0 mm or cut gaskets according to drawing, or EN and international Standards. Special dimensions on request.

Gasket Sheet of Expanded Graphite, both sides with impregnation Characteristics Soft and extremely adaptable non reinforced graphite sheet with a purity of 99.85 %. Special coating on both sides raises sealabilty. Practically no cold flow or creep under temperature. Non hardening Excellent in use at cycling temperatures Excellent sealability even at low gasket stress. Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 40 bar Main application Sensitive Flange connections like sight glasses, glass- or glass lined flanges in all industries. Suitable for In all industries Approvals BAM DVGW KTW Variant Economic grade alternative D 5.0 on request. Form of delivery Gasket sheet size of 1,000 x 1,000 mm in thickness of 1.0 / 1.5 / 2.0 mm or cut gaskets according to drawing, or EN and international Standards Special dimensions on request.

D 5 Prophit High Temperature Gasket of Expanded Flexible Graphite with and without reinforcements Characteristics Temperature range in inert environment up to +3000 °C (attention: reinforcement inserts cause temp limits) Permanent elasticity, resilience approx. 10 % Non ageing - does not contain binding compounds High pressure resistance Radiation resistance and excellent media resistance Main application Flanges Sight glasses Valve bonnets Pipe flanges Suitable for Chemical industry Petrochemical refineries and steam production Pharmaceutical industry Power plant technology Paper industry Sugar industry Form of delivery Sheets or custom die cut rings With inner or/and outer crimp: mat. 1.4571 0.15 mm thick, seamless pressed Other materials and designs on request.

Modified PTFE reinforced with special silica filler Characteristics Protected against cold flow Excellent recovery Very good in applications with varying temperatures Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness FAWN 05 / 0.5 mm FAWN 10 / 1.0 mm FAWN 15 / 1.5 mm FAWN 20 / 2.0 mm FAWN 30 / 3.0 mm Main application Steel or other metal flanges on pipework Vessel Container Reactors in higher temperature applications. Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.5 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards, special dimensions on request.

Universal fiber based high pressure gasket­ Characteristics A perfect selection of gasket material is based on operating conditions like pressure, temperature, media, surface pressure, Nonstick coating assures quick and scaling free disassembling Do not use any surface treatment! Technical parameters Temperature: t = -100 … +200 °C, short term up to 280 °C Pressure: p = 120 bar mainapplication Tube and pipe flanges Vessels Boilers Cylinders Joints Casings Lids Suitable for All Industries Approvals DVGW KTW BAM Form of delivery Sheets 1500 x 1500 mm in thickness of 0.5/0.8/1.0/1.5/2.0/3.0 mm or cut gaskets according to drawing or EN and international Standards Special dimensions and further gasket material styles from recognised manufacturers on request.