Results for
Germany
For the lubrication of plastic/plastic and plastic/metal combinations, e.g. single-serving taps in the food industry or for beverage can holders in the automotive industry Silicone-free alternative for the lubrication of O-rings and sealings during assembly Advantages and benefits Good compatibility to plastics Constant properties without drying, hardening or bleeding Tested for beer foam compatibility NSF H1 registered MOSH/MOAH-free Silicone-free
Request for a quoteGermany
Silicone-free alternative for the lubrication of O-rings and sealings during assembly. Lubrication of plastic parts such as gears, sliding surfaces, etc. Advantages and benefits Excellent adhesion on plastics and metals Tasteless and odourless Consistent properties without drying out, hardening or bleeding NSF H1 registered Compatible with plastics (see table) MOSH/MOAH-free Silicone-free
Request for a quoteGermany
For the lubrication of machine parts under high mechanical loads Silicone-free alternative for the lubrication of O-rings and sealings during assembly For the lubrication of plastic/plastic and plastic/metal combinations, e.g. beverage can holders in the automotive industry Advantages and benefits High shear stability Excellent adhesion on plastics and metals Compatible with plastics (see table OKS 468) Constant properties without drying, hardening or bleeding NSF H1 registered Silicone-free MOSH/MOAH-free
Request for a quoteGermany
Roller chains with elastomer profiles are ideal for applicationswhere fragile goods require gentle conveyor handling. ELITE chains are used for transporting goods that should not be scratched, such as coated or thin sheet metal, planed timber planks or pipes. The material iwis uses for the ELITE product range is nitrile butadiene rubber (NBR) with a hardness of 80 Shore A. NBR offers the optimum combination of cohesive friction, abrasion resistance and durability. Other profile types are possible for special applications and can be supplied on request. ELITE highlights: • All ELITE chain plates 1 are tapered and shot-blasted; production processes such as fine blanking and ball-drifting ensure a particularly high contact ratio • Seamless, cold-extruded, shot-blasted rollers 2 with extremely regular wall thickness • The standard rubber profile 3 is nitrile butadiene rubber (NBR) with a hardness of 80 Shore A.
Request for a quoteGermany
• stainless steel version • easy to assemble clamping hub • plug-in, backlash-free and vibration dampening • torque range: 8 - 500 Nm • shaft diameter: 8 - 55 mm
Request for a quoteGermany
• easy to install clampin ring hub • elastomer attachment with conical clamping hub for small shaft diameters • plug in, blind assembly possible • backlash free, flexible, robust, oscillation dampening • Torque range: 2 - 2000 Nm • Shaft diameter: D1= 9 - 60 mm / D2= 6 - 100 mm
Request for a quoteGermany
• with radial clamping hub on both sides • easy to install - plug in design • compensation of shaft misalignments - oscillation dampening • Torque range: 0,5 - 2.000 Nm • Shaft diameter: D1= 4 - 90 mm / D2= 5 - 100 mm
Request for a quoteGermany
• radial clamping hub on both sides • cost-effective, very short design, standard series • plug in, backlash free, oscillation dampening • Torque range: 8 - 2.000 Nm • Shaft diameter: 8 - 90 mm
Request for a quoteGermany
• simple installation due to split-hub design • can be combined with EKM - hub or ESM-A - hub • mountable without disassembly of motor • Torque range: 15 - 2.000 Nm • Shaft diameter: 8 - 100 mm
Request for a quoteGermany
• low-cost version with set-screw • plug in - oscillation dampening • Torque range: 0,7 - 12,5 Nm • Shaft diameter: 3 - 14 mm • Temperature range -20 to +70°C
Request for a quoteGermany
• standard series with radial clamping hub • plug in - radial shaft displacement up to 3 mm • Torque range: 1 - 15 Nm • Shaft diameter: 3 - 19 mm • Temperature range -20 to +100°C
Request for a quoteGermany
• low-cost version with set screws • plug in - radial shaft displacement up to 3 mm • Torque range: 1 - 15 Nm • Shaft diameter: 3 - 19 mm • Temperature range -20 to +100°C
Request for a quoteGermany
• WD: Length L = 0,2 - 4 m \ Tmax = 90°C • WDS: Length L = 0,2 - 6 m \ Tmax = 200°C • backlash free, exact torque transfer without additional intermediate bearing • high speed, low moment of inertia • very easy to fit with splitted hub design • torque range: 15 - 1600 Nm • shaft diameter: 6 - 85 mm
Request for a quoteGermany
• conical clamping hub on both sides • rotary symetric design - high speed • plug-in, backlash free, oscillation dampening • Torque range: 10 - 2.000 Nm • Shaft diameter: 6 - 85 mm
Request for a quoteGermany
• with easy keyway connection • elastomer coupling with radial clamping hub, plug in design • backlash free, flexible, robust, oscillation dampening • Torque range: 2 - 2000 Nm • Shaft diameters: D1=8 - 90 mm / D2=6 - 90 mm
Request for a quoteGermany
• standard version with radial clamping hub • plug in - oscillation dampening • Torque range: 0,7 - 12,5 Nm • Shaft diameter: 3 - 14mm • Temperature range -20 to +70°C
Request for a quoteGermany
• customized length up to 3 m • plug in, backlash free, oszillation dampening • split- hub on both sides • stainless design (aluminum) • Torque range: 20 - 1600 Nm • Shaft diameter: 10 - 100 mm • temperature range: -30°C up to +90°C
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Elastomers - Import exportNumber of results
17 ProductsCompany type