Results for
Germany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteGermany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteGermany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteGermany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteGermany
• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces
Request for a quoteGermany
Bio-Oil is a specialized skincare product that is formulated to improve the appearance of scars, stretch marks, uneven skin tone, aging skin, and dehydrated skin. It contains a unique blend of ingredients including vitamins A and E, calendula oil, lavender oil, rosemary oil, and chamomile oil. These ingredients work together to nourish and hydrate the skin, while also promoting cell regeneration and improving elasticity. Bio-Oil is lightweight and easily absorbed into the skin, leaving it feeling soft and smooth. It can be used on the face and body and is suitable for all skin types. Regular use of Bio-Oil can help to reduce the visibility of scars and stretch marks, even out skin tone, and improve overall skin texture.
Request for a quoteGermany
Highly recommended for large and thin-walled Mg castings Temperature Range 160 °C to 400 °C Alloy Al, Mg Properties and Advantages • extreme release power • no build-up • bright castings
Request for a quoteGermany
Release agent for Mg structural parts with low tolerances Temperature Range 160 °C bis 400 °C Alloy Mg, Al Properties and Advantages • good adhesion and film formation properties even at high temperatures • formation of a thin release film
Request for a quoteGermany
Release agent based on 25 years of product development Temperature Range 150 °C bis 380 °C Alloy Al, Mg, Zn Properties and Advantages • high process reliability due to extremely stable micro-emulsion • excellent release effect, bright castings • parts perform unproblematically in joining processes
Request for a quoteGermany
General purpose release agent, suitable for a wide range of castings including large and heavy as well as structural parts Temperature Range 160 °C to 400 °C Alloy Al, Mg, Zn Properties and Advantages • ideally suitable for conventional as well as micro-/minimal spraying • strong release power • no build-up • bright castings • castings can be welded, painted and powder coated
Request for a quoteGermany
Water-based special release agents in various concentrations for low volume spray application Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • castings are particularly suitable for the "bonding and welding" joining processes • products can be further diluted • effective reduction of "metallization" (metal-to-metal bonding) • exceptional release effect with good lubrication of ejectors and slides
Request for a quoteGermany
Tried and tested release agent, which is qualified for glueing and welding of structural castings Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • ideally suitable for conventional as well as micro-/minimal spraying • approved for glueing, welding, painting and powder coating • no build-up • die wetting already at lower temperatures
Request for a quoteGermany
A big choice for small loads. With the new and practical height of the MINI-systainer® T-Loc III, you have even more options for storing products in a space-saving manner. New features of the MINI-systainer® T-Loc III include fully-functional card compartments, with label sets available as accessories. Of course, the MINI-systainer® T-Loc III can be attached to the MINI-systainer® T-Loc I as usual. * The exterior dimensions, measured without the feet, are: H + 4.7 mm Outside dimensions H* 142 x W 265 x D 171 mm Inside dimensions H 124 x W 254.5 x D 154.5 mm Weight: 0.60 kg * The outside dimensions are measured without feet: H + 4.7 mm
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
<div>Stackable and connectable with Classic-Line and T-Loc systainer® With drawer incl. 2 dividers Top systainer® - bottom drawer: connect the trusted systainer® T-Loc III with one drawer Even better organisation for your everyday work Interior dimensions of systainer®: H 180 x W 382 x D 266 mm Interior dimensions of drawer: H 69 x W 350 x D 255 mm Exterior dimensions of systainer®: H 315 x W 396 x D 296 mm * The exterior dimensions are measured without feet: H + 7 mm </div> with drawer incl. 2 separating webs Outside dimensions: H* 315 x W 396 x D 296 mm Inside dimensions systainer®: H 180 x W 382 x D 266 mm Inside dimensions drawer: H 69 x W 350 x D 255 mm Weight: 3.50 kg * The outside dimensions are measured without feet: H + 7 mm
Request for a quoteGermany
Stackable and connectable Can be combined with systainer® I-V An optimal choice for packaging large or bulky objects Our MAXI-systainer® is the best and easiest choice for storing or transporting large materials Outside dimensions H 157,5 x W 596 x D 396 mm Inside dimensions H 124 x W 545 x D 330 mm
Request for a quoteGermany
Consisting of systainer® T-Loc III incl. EPP insert in cover and in body Suitable for keeping materials cool or warm for a long period of time. Isoliersystainer®: interior dimensions, approx. L 316 x W 222 x H 123 mm systainer® material: ABS Insulating insert material: EPP moulded foam Consisting of systainer® T-Loc III incl. EPP insert in cover and in body Suitable for keeping materials cool or warm for a long period of time. Isoliersystainer®: interior dimensions, approx. L 316 x W 222 x H 123 mm systainer® material: ABS Insulating insert material: EPP moulded foam
Request for a quoteGermany
<div>Stackable and connectable with Classic-Line and T-Loc systainer® With one drawer incl. 2 dividers Top systainer® - bottom drawer: connect the trusted systainer® T-Loc II with one drawer Even better organisation for your everyday work Interior dimensions of systainer®: H 127.5 x W 383 x D 267 mm Interior dimensions of drawer: H 69 x W 350 x D 255 mm Exterior dimensions of systainer®: H 263 x W 396 x D 296 mm * The exterior dimensions are measured without the feet: H + 7 mm </div> with drawer incl. 2 separating webs Outside dimensions: H* 263 x W 396 x D 296 mm Inside dimensions systainer®: H 127.5 x W 383 x D 267 mm Inside dimensions drawer: H 69 x W 350 x D 255 mm Weight: 3.20 kg * The outside dimensions are measured without feet: H + 7 mm
Request for a quoteGermany
Consisting of systainer® T-Loc IV incl. EPP insert in cover and in body Suitable for keeping materials cool or warm for a long period of time. Isoliersystainer®: interior dimensions, approx. L 316 x W 218 x H 228 mm systainer® material: ABS Insulating insert material: EPP moulded foam Consisting of systainer® T-Loc IV incl. EPP insert in cover and in body Suitable for keeping materials cool or warm for a long period of time. Isoliersystainer®: interior dimensions, approx. L 316 x W 218 x H 228 mm systainer® material: ABS Insulating insert material: EPP moulded foam
Request for a quoteResults for
Die casting - Import exportNumber of results
23 ProductsCompany type