Coupling - Import export

Our corrugated tubes and the respective accessories (couplings or sleeves, O-rings, manifolds and hose mounts) are made to customer's specification. They are ideally suited for longterm use in the transport of liquids, also at very high temperatures, or chemical substances, they are crush resistant and have been 100% leak tightness tested. Available materials/maximum operating temperature: PP -40°C - + 105°C PE -40°C - + 70°C Application: Dishwashers, washing machines, dryers, refrigerators or freezers, coffee makers, whirlpools, electric tooth brushes etc.

Our fittings high quality is based on: – Patented design PPSU fitting, with three EPDM O-rings and inox sleeves. – Compatible with multilayer pipes. – Compatible with several jaw profiles, such as U, H, TH and RFz for fittings from 16 mm to 32 mm – Jaw profiles U, TH for 40 and 50 mm.

Compatibility: The mobile wireless receiver can be coupled with Vices of ALLMATIC Clamp assist Serie: TITAN 2 K/M/L TITAN 2-160 Scope of application: -Acquisition of the current tensions in the fully encapsulated high pressure spindle by means of an integrated, electronic measuring system and transfer to the mobile receiving unit -Independent from the jaws, the measurement system is integrated in the spindle -Clamping force is constantly monitored during its actual tension condition -Storing of the clamping forces can be called up at any time through the electronics integrated in the spindle -Power values are transmitted via radio to the mobile receiving unit (MWR) (2. 4 GHz) -MWR simultaneously and digitally displays the clamping force for up to 4 spindles in kN -The clamping force (reference power) default, set by the user, is indicated by a led at the MWR upon reaching the 90% mark -The last 200 stored clamping operations can be transferred in CSV format

In rotary encoders with integral bearing and stator coupling, the graduated disk of the encoder is connected directly to the shaft to be measured. The scanning unit is guided on the shaft via ball bearings, supported by the stator coupling. During angular acceleration of the shaft, the stator coupling must absorb only that torque resulting from friction in the bearing, thereby minimizing both static and dynamic measuring error. Moreover, the coupling mounted on the stator compensates axial motion of the measured shaft. Other benefits of the stator coupling are: Simple mounting Short overall length High natural frequency of coupling Hollow-through shaft possible

iwis not only manufactures sprockets and plate wheels according to ISO 606 but also customized versions built in accordance with your specifications, drawings or samples. Sprockets Our standard range of sprockets includes sprockets according to ISO 606 from size 05B-1 to 32B-3. Sprockets with taper-lock bushes Taperlock-bushes for fixing hubs precisely and axially centered on a shaft. Plate wheels Standard plate wheels for the complete iwis product program: sizes 05B-1 to 32B-3. Drive sprockets and idler wheels For the FLEXON Flat Top Chain program. Our drive components program consists of torque limiters, Couplings, Tensioners, Chain tools and etc.

• with radial clamping hub on both sides • easy to install - plug in design • compensation of shaft misalignments - oscillation dampening • Torque range: 0,5 - 2.000 Nm • Shaft diameter: D1= 4 - 90 mm / D2= 5 - 100 mm

• stainless steel version • easy to assemble clamping hub • plug-in, backlash-free and vibration dampening • torque range: 8 - 500 Nm • shaft diameter: 8 - 55 mm

• with easy keyway connection • elastomer coupling with radial clamping hub, plug in design • backlash free, flexible, robust, oscillation dampening • Torque range: 2 - 2000 Nm • Shaft diameters: D1=8 - 90 mm / D2=6 - 90 mm

• variable lengths from 55 to 260 mm • without additional intermediate storage • backlash-free, precise torque transmission • special symmetrical clamping hub with high balancing quality and for high operating speeds

• High-speed version for the highest operating speeds • Rotationally symmetrical clamping hub for optimum balancing quality

• simple installation with optional radial EASY-clamping hub on both sides • steel hub - welded design - temperatures up to 300°C • 2-, 4- or 6-corrugation bellows - short design - high torsional stiffness • Torque range: 5 - 20Nm • Shaft diameter: 6 - 20 mm » KG-VA = stainless steel optional

• with radial clamping hub both sides • simple installation • compensations of sfaft misalignements - low restoring forces • Torque range: 0,5 - 3.000 Nm • Shaft diameter: D1= 5 - 90 mm / D2= 5 - 100 mm

• short design – with radial clamping hub • high torsional stiffness - flexible • Torque range: 2 - 12 Nm • Shaft diameter: 3 - 24 mm • Temperature range -40 to +200°C

• standard version with radial clamping hub • high torsional stiffness - flexible • Torque range: 0,4 - 12 Nm • Shaft diameter: 3 - 24 mm • Temperature range -40 to +200°C

• customized length up to 3 m • plug in, backlash free, oszillation dampening • split- hub on both sides • stainless design (aluminum) • Torque range: 20 - 1600 Nm • Shaft diameter: 10 - 100 mm • temperature range: -30°C up to +90°C

• easy to install clampin ring hub • elastomer attachment with conical clamping hub for small shaft diameters • plug in, blind assembly possible • backlash free, flexible, robust, oscillation dampening • Torque range: 2 - 2000 Nm • Shaft diameter: D1= 9 - 60 mm / D2= 6 - 100 mm

• simple installation with radial EASY-clamping hub on both sides • steel hub - welded design - temperatures up to 350°C • 2-, 4- or 6-corrugation bellows - short design - high torsional stiffness • Torque range: 40 - 1.300 Nm • Shaft diameter: 12 - 90 mm » KG-VA = stainless steel optional

• easy keyway connection • cost- effective type • with integrated ball bearing for high axial and radial load • torque range: 2 to 9000 Nm • shaft diameter: 6 - 90 mm

• with conical clamping hub on both sides • compensations of shaft misalignments - low restoring forces • high balance quality - for small shaft diameters • Torque range: 2 to 9000 Nm • Shaft diameter: D1= 6 - 130 mm / D2= 5 - 120 mm

• with keyway connection on both sides • with integrated grooved ball bearing for high bearing reaction • cost-efficient execution • Torque range: 2 - 9.000 Nm • Shaft diameter: D1= 6 - 140 mm / D2= 6 - 110 mm

• conical hub on both sides • straight bellow - long design • Torque range: 25 - 2.500 Nm • Shaft diameter: 10 - 102 mm • low storing forces – high torsional stiffness

• low-cost version with set-screw • high torsional stiffness - flexible • Torque range: 0,4 - 8 Nm • Shaft diameter: 3 - 24 mm • Temperature range -20 to +90°C

• variable length up to 3 m • Low- Cost- Version with reduced operating parameters • backlash free, exact torque transfer • very easy to fit with splitted hub design • Torque range: 40 - 500 Nm • Shaft diameter: 14 - 70 mm • temperature range: -40°C up to +90°C

• simple installation, with EASY-Clamping hub on both sides • 6-corrugation bellows - cost-effective standard series • Torque range: 20 - 1.800 Nm • Shaft diameter: 8 - 85 mm

• simple installation with radial EASY-clamping hub on both sides • 4-corrugation bellows - short design - high torsional stiffness • Torque range: 20 - 900 Nm • Shaft diameter: 10 - 75 mm

• simple installation with radial EASY-clamping hub on both sides • straight bellow - long design • low restoring forces – high torsional stiffness • Torque range: 25 - 1.500 Nm • Shaft diameter: 8 - 85 mm

• simple installation - split-hub design • wear and maintenance free • variable length stainless steel version up to 350°C • Torque range: 10 - 1.200 Nm • Shaft diameter: 7 - 85 mm

• steel hub - welded design - temperatures up to 350°C • 2-, 4-, or 6-corrugation bellows - short design - high torsional stiffness • Torque range: 30 - 1.000 Nm • Shaft diameter: 10 - 90 mm • stainless steel