Results for
SPIROL
Germany
SPIROL’s heavy duty & fatigue resistant Coiled Spring Pins are available in diameters ranging from 1.5mm (.062") up to 20mm (.750"). Standard materials include high carbon steel, 302/304 nickel (austenitic) stainless steel, and 420 chrome (martensitic) stainless steel. Diameters larger than 12mm (.500") are available in 6150 alloy steel. SPIROL invented the Coiled Spring Pin in 1948. Coiled Pins are available in light duty, standard duty and heavy duty to match the required strength and flexibility for each application. A pin too strong for the applied load will not flex and may damage the hole. A pin that is too flexible may fatigue prematurely within the assembly. The Coiled Pin with the optimal balance of strength, flexibility and diameter will result in the prolonged useful life of the assembly.
Request for a quoteSPIROL
Germany
SPIROL invented the Coiled Spring Pin in 1948. Truly an engineered fasteners, the Coiled Pin is available in three duties, light, standard and heavy, to enable the designer to choose from the optimum combination of strength, flexibility and diameter to suit different host materials and application requirements. Their shock absorbing design dampens forces and vibration to prevent hole damage and prolong assembly life. Light Duty Coiled Spring Pins are generally recommended for soft, brittle or thin materials such as plastics, aluminium, die castings, ceramics, and where holes are located close to an edge of the assembly. In situations not subjected to significant loads, such as when used purely for alignment or as an axle, light duty Coiled Pins are often used because of easy installation resulting from lower insertion force.
Request for a quoteSPIROL
Germany
While Coiled Spring Pins are extremely versatile self-retaining fasteners that can be used for many different functions, SPIROL has designed several series of Coiled Pins to meet the nuances and performance requirements of some particular niche applications. These Coiled Spring Pins are variations of our standard product either manufactured from special material, have a special finish or undergo specific processing to meet performance, corrosion, compatibility and assembly requirements for the specific application. These pre-designed application-specific series of Coiled Pins help companies shorten the design cycle to confidently launch their product quickly to their market with a pinning solution that has been tested and proven within their assembly.
Request for a quoteSPIROL
Germany
The Series 500 Extra Light Duty Coiled Pins were specifically designed for use in soft or fragile materials. The 1½ coil formation ensures that the radial force exerted against the hole wall does not exceed the strength of the hole material to prevent deformation. These pins are also an economical solution where pin strength is not a major design consideration. Typical applications for Series 500 Extra Light Duty Pins include: hinge pins in plastic or ceramic assemblies, alignment pins, and fastening applications where the hole is close to an edge of an assembly component.
Request for a quoteSPIROL
Germany
SPIROL manufactures Coiled Spring Pins out of 316 stainless steel to meet specific application requirements. Type 316 stainless steel is similar to 302/304 stainless steel with a slightly higher nickel content and the addition of molybdenum. The molybdenum content increases the chemical resistance of this alloy greatly. 316 exhibits superior pitting resistance against sea water, acetic acid vapors, chlorides, sodium and calcium brines, hypochlorite solutions, phosphoric acid, and the sulfite liquors and sulfurous acids used in the paper and pulp industry. This alloy is also austenitic, non-magnetic and non-hardenable using conventional methods. 316 stainless steel has better mechanical properties at elevated temperatures than 302/304 and offers excellent mechanical integrity at subzero temperatures. Typical applications for SPIROL's 316 Stainless Steel Coiled Pins include the following: marine, processing equipment, industrial, oil and gas and medical.
Request for a quoteSPIROL
Germany
SPIROL's Series 600 Superflex Coiled Pin has a loosely wrapped outer coil and a diameter at 90° to the seam equal to the hole size to provide a low insertion force and enhanced flexibility after insertion. The Superflex Pin eliminates insertion problems associated with hardened holes with sharp edges. A Superflex Coiled Pin is not distorted during insertion and maintains its straightness. One example of a great application for the Superflex Pin is when the pin is inserted into a shaft with both ends exposed for engagement into a slotted clutch component.
Request for a quoteSPIROL
Germany
You can rely on SPIROL to be a design partner that helps solve unique problems. Because we supply many customers with similar products in similar industries, we are able to meet most needs with our standard products at no additional cost. When the solution falls outside the normal requirements, we have the expertise and engineering personnel to solve those problems. By working with SPIROL in the design stage of your project, we will develop a solution that lowers your overall product cost, improves product quality, increases the robustness of your manufacturing process, and gets you to market faster. There are a number of common special Coiled Spring Pins that SPIROL has designed over the years to meet specific performance requirements. This includes making Coiled Pins from special materials such as 316 stainless steel, beryllium copper, and Inconel, or designing Coiled Pins to meet unique application requirements resulting in custom diameters, custom lengths, special features, etc.
Request for a quoteSPIROL
Germany
The Series 550 Cosmetic Coiled Pin was designed specifically for cosmetic cases to ensure the perfect balance of strength and flexibility. The 1-1/2 coil construction ensures that the Cosmetic Coiled Pin exerts sufficient radial force to achieve the long-term desired swing torque while protecting the plastic from excessive stresses. The use of SPIROL Series 550 Cosmetic Coiled Pin will simplify your design and manufacturing process. Uniform radial spring force results in controlled hinge movement and a hinge quality that remains consistent over time. Controlled hinge movement is achieved with wider tolerances and lower moulding costs than when a Solid Pin or cut wire is used. Finally, low insertion force and compression of the pin during installation minimises hinge stress and scrap. The net result is the prolonged useful life of the assembly.
Request for a quoteSPIROL
Germany
The Coiled Spring Pin was invented by SPIROL in 1948. SPIROL offers Coiled Pins in three duties, light, standard and heavy, to provide a variety of combinations of strength, flexibility and diameters to accommodate different host materials and applications. Standard duty (sometimes called "medium" duty) Coiled Spring Pins are generally recommended for use in nonferrous and mild steel assemblies and provide the optimum combination of strength and flexibility in these materials. Standard duty Coiled Pins are also preferred in hardened components when there is enough space to accommodate the larger diameter to withstand the applied force because of their ability to absorb shock and vibration. SPIROL's standard duty Coiled Spring Pins are offered in both metric (conforms to ISO 8750 and ASME B18.8.3M) and inch (conforms to ASME B18.8.2) sizes.
Request for a quoteSPIROL
Germany
SPIROL's Series 101 Headrest Coiled Spring Pins were designed specifically for use in automotive headrest assemblies. The advantages of SPIROL's headrest pins are as follows: • Absorbs shock and vibration • Increased productivity • 100% dimensional control • Symmetrical • Non-interlocking • Accommodates wide hole tolerances • Easy to install • Simplified logistics • Global supply
Request for a quotePRÜFREX INNOVATIVE POWER PRODUCTS GMBH
Germany
Our fully automated winding centres for fine and self-bonding wire make us the perfect partner for any tasks you require. Our coils are tinned with lead-free coatings (RoHS). At PRUFREX, single-chamber and multi-chamber coils can also be achieved using two-wire windings. For specific magnetic flux requirements, we apply wires of different thicknesses to the coil form. Two different wire thicknesses, from 0.045 to 0.71 millimetres, on coil forms with press-in ferrite or metallic cores.
Request for a quotePRÜFREX INNOVATIVE POWER PRODUCTS GMBH
Germany
Our fully automated winding centres for fine and self-bonding wire make us the perfect partner for any tasks you require. Our coils are tinned with lead-free coatings (RoHS). We can wind onto any desired coil form using many different press-in ferrite and metallic cores. Multiple tap coils are also possible. Pins are automatically applied to the coil connections during the winding process, with wire drawing electrically controlled. Our winding machines handle single-chamber and multi-chamber coils with wire thicknesses from 0.045 to 0.71 millimetres.
Request for a quotePRÜFREX INNOVATIVE POWER PRODUCTS GMBH
Germany
Our fully automated winding centres for fine and self-bonding wire make us the perfect partner for any tasks you require. Our coils are tinned with lead-free coatings (RoHS). To manufacture self-supporting coils, we use self-bonding wire. During winding, the surface of the wire is bonded using hot air. To ensure the coil connections can be soldered, they are then stripped of insulating enamel using a fully automated milling process. PRUFREX is able to make air core coils with wire thicknesses from 0.045 to 1.6 millimetres.
Request for a quoteSPIROL
Germany
SPIROL's Series 880 Coiled Spring Pin was designed specifically for use as the hinge pin for PC board card lock and ejector clip mechanisms. The quality of the hinge is unsurpassed by other fastening methods due to the low insertion force and compression of the pin during and after installation. As with all Coiled Spring Pins, the Series 880 hinge pin for PC board card locks and ejector clips is self-retaining, and thus no secondary processes are required for retention. The Coiled Pin's uniform radial spring force results in a controlled hinge movement that remains consistent throughout the life of the assembly.
Request for a quoteSPIROL
Germany
SPIROL's Series 102 Coiled Spring Pins were designed specifically for use in automotive transmission assemblies. These transmission pins are available in standard and heavy duty to enable the designer to choose the optimum combination of strength, flexibility and diameter to suit different host materials and application requirements. All Series 102 transmission pins are 100% dimensionally controlled for consistency during assembly. Additional advantages include: • Absorbs shock and vibration • Non-interlocking • Symmetrical • Easy, trouble free assembly • Ideal for automatic installation • Global supply
Request for a quoteSPIROL
Germany
SPIROL's Series 100 Key Fob Coiled Spring Pins were designed specifically to secure the key to the fob. The advantages of these high-performance automotive key fob security pins are as follows: Increased productivity, easy and trouble-free assembly, and simplified logistics.
Request for a quoteSIGNODE PACKAGING SYSTEMS GMBH - BUSINESS UNIT SMB SCHWEDE MASCHINENBAU
Germany
Economical owing to highest availability Pneumatic free Easy handling Optimal access Strap retraction and strap tension reinforced ASLF 'Anti-Strap-Loss-Function' Constant strap control Automatic Strap feed DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Torque controlled strap tension, adjustable GreenTech energy concept, low power consumption Intuitive operator interface Machine movable MFT 'Mono-Frame-Technology' Table height steplessly adjustable Wear-free, energy saving direct-drive-motors Low maintenance and low wear strap arch Many specific options available, easily configurable
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
DIETZ GMBH
Germany
Production to order – also with special-purpose materials as required: We only produce in accordance with customer specifications. Compression springs can assume a wide variety of designs and forms. Our production facilities include compression springs with wire thicknesses in the range of 0.30 to 3.00 mm with abraded ends and in the range of 0.10 to 4.00 mm with unabraded ends. Even extremely strict tolerances regarding length and strength are adhered to in our compression spring production facility. Special-purpose materials that meet specific requirements can also be integrated into production without any problems. Wire materials: All standard spring steel wires in accordance with EN 10270. Non-ferrous wires made of copper, brass and bronze. Special alloys such as: Hasteloy, CuNi44, NbZr1, TaW2. Other materials on request.
Request for a quoteNORIS GROUP GMBH
Germany
Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design. Individual scale design and corporate logos possible. Available in different sizes: 60 mm, 80 mm, 100 mm, 130 mm (diameter). Also available with a centred zero moving-coil element (±1 mA). Direct connection of the current, voltage measuring signals. Complies with DNV GL certification (other certifications available on request). Complies with DIN EN 50155 for railway applications.
Request for a quoteNORIS GROUP GMBH
Germany
Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design. Individual scale design and corporate logos possible. Available in different sizes: 72x72 mm, 96x96 mm, 144x144 mm. Also available with a centred zero moving-coil element (±1 mA). Direct connection of the current, voltage measuring signals. Complies with DNV GL certification (other certifications available on request). Complies with DIN EN 50155 for railway applications.
Request for a quoteNORIS GROUP GMBH
Germany
Robust glass-fibre-reinforced plastic housing, also suitable for outdoor areas; round or square design. Individual scale design and corporate logos possible. Available in different sizes: 72x72 mm, 96x96 mm, 144x144 mm. Also available with a centred zero moving-coil element (±1 mA). Direct connection of the current, voltage measuring signals. Complies with DNV GL certification (other certifications available on request). Complies with DIN EN 50155 for railway applications.
Request for a quoteDIMET GMBH
Germany
USED FOR HANDLING OF coils / rod and rebar in coils. Specially designed for eye vertical coil lifting / copper coil as an option / hot material handling up to 650°C as an option
Request for a quoteDIMET GMBH
Germany
USED FOR HANDLING OF Sheet steel in coils / Sheet steel in coils, lifting from the lateral and end sides / -Rolled wire coils, rebar coils, from the end side Heat-resistant version (cargo temperature up to 650° degrees C). Aluminium coil
Request for a quoteResults for
Coils - Import exportNumber of results
24 ProductsCompany type