Results for
PROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Combination Braid Made of PTFE and Para-Aramid Fiber with Run-In Lubricant Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar max. velocity centrifugal pumps: 15 m/s Characteristics Universal packing for abrasive media which need a reinforced, wear resistant and form stable packing Shaft protecting through good coefficient of fiction No contamination of media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar max. velocity centrifugal pumps: 15 m/s Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Pulp and paper industry Form of delivery This packing can be manufactured from 6 to 40 mm square as well as in...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
100% PTFE - Fiber with special PTFE Dispersion and FDA conform Siliconoil impregnated Characteristics Highest chemical resistance for a packing in rotating equipment Pliable, easily compressible packing Self lubricating, dry running capability Shaft protecting surface hardness of HRC 25 is sufficient Non ageing Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1 m/s Pressure [p max]: 500 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.70 g/cm³ Main application Agitators Mixer Refiner Filter Slow speed Centrifugal pumps Valves, Gate valves Metering valves Suitable for Pulp and paper industry Chemical industry Pharmaceutical industry Food industry Approvals FDA conformity EN 1935:2004 in accordance with EN 10/2011 Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 -...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
PTFE Fiber with PTFE Blocking Agent and Silicone Free Run-In Lubricant Characteristics Highest chemical resistance for a packing in rotating equipment Pliable, easily compressible packing Self lubricating, dry running capability Shaft protecting surface hardness of HRC 25 is sufficient Non ageing Operating range Pressure [p max]: 15 bar, Velocity [v max]: 10 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 100 bar Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.70 g/cm³ Main application Agitators Mixer Refiner Filter Slow speed Centrifugal pumps Valves, Gate valves Metering valves Suitable for Chemical industry General industry Variant S6SI with Food certification EG 1935:2004 in accordance with EU 10/2011 FDA conformity Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Combination braid of ePTFE Yarn incorporated with Graphite, Meta-Aramid Fibers and special impregnation Practical useful application data: max. temperature: +200 °C Characteristics Excellent Standardisation possibilities High Cross Sectional density, yet still elastic and flexible Suitable for use with hardening and crystallizing products Displays reduced wear through special running track reinforcement Unique formulation impregnation improves flexibility, ensures packing will not harden Provides excellent chemical resistance Recommended shaft surface hardness: HRC 35 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 150 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Fittings Filter Suitable for Pulp and paper industry Chemical industry Form of delivery This...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Combination Braid of ePTFE with incorporated Graphite and PTFE Fiber Corner Reinforcement with Special Blocking compound Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics High cross section density and structural stability, elastic and pliable Special Impregnation prevents hardening of packing Improved friction properties minimizing shaft or sleeve wear Shaft hardness HRC 25 is sufficient Resistant against solvents, acids and crystallizing media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.60 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Chemical industry Sugar...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Para-Aramid Fiber Packing with PTFE Impregnation and Run-In Lubricant Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High cross section density through PTFE blocking agent, which protects against penetration of crystallizing media Excellent value for money Good resistance against wear, with abrasive and hardening mediums Recommended shaft surface hardness: HRC 50 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.20 g/cm³ Practical useful application data: max. temperature: +200 °C Haupteinsatzgebiet Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Power plant technology Waste water technology Mining industry Variant Square shape P7 Form of delivery This packing can be manufactured in...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Meta-Aramid Fiber with PTFE Blocking Agent and Run-In Lubricant Characteristics Wear resistant, universal packing for applications with abrasive content High cross section density and structural stability, yet elastic and pliable Low friction, low shaft wear (HRC 45 shaft shaft surface hardness is sufficient) Clean packing, no contamination of media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.40 g/cm³ Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Waste water technology Form of delivery This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements. Available from 4 to 9 mm in square X-Section. 04 - 09 mm on 1kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Braid of ePTFE yarn with Incorporated Graphite and Run-In Lubricant Characteristics Excellent heat conductivity Maximum protection of shaft against wear (HRC 25 is sufficient) Extended MTBF Easy and safe installation and handling No ageing process Operating range Pressure [p max]: 25 bar, Velocity [v max]: 25 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.50 g/cm³ Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Vacuum pumps Suitable for Universal use Waste water technology Acids Alkaline solutions Oil and grease Form of delivery This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements. Available from 4 to 9 mm in square X-Section as Style P1P. 04 - 09 mm on 1kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Combination Braid of ePTFE with Incorporated Graphite and Para-Aramid Fiber Surface reinforcement with Run-In Lubricant Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Even and reduced shaft surface wear Excellent heat conductivity Recommended shaft surface hardness: HRC 45 Safe and universal packing with abrasive media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Kneader Agitators Filter Refiner Suitable for Chemical industry Pulp and paper industry Waste water technology Variant S12K Plunger with Para-Aramid Cornerreinforcement, available 6 mm and above Form of delivery This packing can be manufactured from...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Polyimid Fiber with PTFE Impregnation and Silicone Run-In Lubricant Practical useful application data: max. temperature: +180 °C High fatigue strength and flexibility Good acid resistance High cross section density through PTFE blocking agent, good for crystallizing media Recommended shaft surface hardness: HRC 35 Good pliability, therefore perfect adaption of uneven shaft surfaces Operating range Pressure [p max]: 20 bar, Velocity [v max]: 15 m/s Pressure [p max]: 60 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 0 - 12 Density: 1.30 g/cm³ Practical useful application data: max. temperature: +180 °C Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Sugar industry Pulp and paper industry Mining Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Synthetic Fiber with PTFE Impregnation and siliconfree dynamic Run in Lubricant Practical useful application data: max. temperature: +180 °C Characteristics High fatigue strength and flexibility Good acid resistance (e. g. hydrofluoric acid 15 % / 50 °C) High cross section density through PTFE blocking agent, good for crystallizing media Recommended shaft surface hardness: HRC 35 Good pliability, therefore perfect adaption of uneven shaft surfaces Operating range Pressure [p max]: 20 bar, Velocity [v max]: 15 m/s Pressure [p max]: 60 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +280 °C pH: 1 - 13 Density: 1.35 g/cm³ Practical useful application data: max. temperature: +180 °C Main application Centrifugal pumps Mixer Kneader Agitators Filter Extruder Refiner Suitable for Chemical industry Sugar industry Pulp and paper industry Mining Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Para-Aramid Fiber Packing with PTFE Impregnation and Run-In Lubricant Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High cross section density through PTFE blocking agent, safety against penetration of crystallizing media Offers excellent value for the money Good protection against wear, with abrasive and hardening media Recommended shaft surface hardness: HRC 50 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.20 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Power plant technology Waste water technology Mining industry Variant Trapez shape TP7 P7A without lubricant for valves, armatures, gate valves S7G...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Hybrid braid in W-Profile made of heat conductive ePTFE Yarn with Meta-Aramid fiber reinforcement and Run-In lubricant Characteristics Clean packing with ultimate heat conductivity for abrasive products in pumps and other rotating equipment. Recommended shaft surface hardness: HRC 35 Porosity filling coating increases density and protects the packing in crystallizing mediums. W-Profile Reinforcement reduces shaft wear Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.55 g/cm³ Main application Centrifugal pumps Mixer Agitators Kneader Filter Suitable for Pulp and paper industry Chemical industry Power plant technology Waste water technology Applications with abrasive products and when white packing is required Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special...
Request for a quoteFIBALON GMBH
Germany
The use of filtration materials and systems in the field of industrial applications and the use of filter in the producing industries claim filter as well as filter systems on the highest degree. New fiber types with different surface modifications in a new combination, united in the innovative polymer fiber filter FIBALON®tool, offering unique and outstanding filtration results. By optimizing our developed dynamic fiber fixation DyFix® and a particle-dependent fiber geometry, we can now also offer our worldwide unique polymer fiber filter for the industrial use. For example in metal band saws to protect the pump or for the treatment of cooling lubricants and also for cutting fluids (e.g. in CNC machines) is FIBALON®tool with its highly durable special fiber combination an inexpensive alternative with improved filtration efficiency compared to conventional systems such as centrifuges or belt filter systems.
Request for a quoteResults for
Centrifugal filters - Import exportNumber of results
15 ProductsCompany type
Category