Additions - Import export

FLAME RETARDANT FOR PLASTICS

INTRODUCING NEWOSTAT® INTERNAL AND EXTERNAL ANTISTATS FOR PLASTIC Everybody is familiar with electrostatic discharge. It becomes visible, and especially perceptible, when walking over a nonconductive floor, then touching a door handle and getting “a shock.” Such discharges are not only unpleasant, but in many sectors are even dangerous. Antistatic agents are used to avoid this problem and thus make both the manufacture and the use of plastic products safer. However, antistats can also contribute an additional positive effect. With NEWOSTAT® antistatic agents, the tendency of many plastics to attract dirt can be markedly reduced.

In many plastic systems, such as elastic PVC floor coverings, a wide variety of Incorporated inorganic fillers. However, these inorganic additives do not show any significant tendency to be incorporated into the liquid constituents of a plastisol. Without suitable additives, this is practically impossible. Provides for an optimal distribution of the filler NEWOS for the process step of dispersing innovative and market-proven process aids under the name NEWOTEC.

INTRODUCING NEWOLAN® NEWOLAN®- rheology additives – Products that make coating easier Many important plastics accrue during manufacture as fine particulate powders. It is often difficult to produce sheeting from them on a supporting material for example for floor coverings. Therefore, before mechanical shaping as a surface can occur, these powders must first be converted into a flowable or spreadable paste with a fluid medium. Such pastes are called plastisols. In the process, rheology additives optimally adapt the flow behavior (rheology) of the PVC pastes to the process parameters during sheeting manufacture. Under the brand name NEWOLAN®, NEWOS offers innovative and market-tested rheology additives that can be optimized to your requirements at any time.

f your application requirements cannot be met by a standard SPIROL Spacer, our Application Engineering department will assist you in designing a tubular part that meets your specific needs. SPIROL specializes in replacing costly machined and cold-formed components with less expensive roll-formed product. SPIROL’s proprietary manufacturing technology enables the cost-effective production of special tubular products that meet the performance requirements of the comparatively more expensive alternatives.

You can rely on SPIROL to be a design partner to help solve unique problems. Because we supply numerous customers with similar products in similar industries, we are able to meet most needs with our standard products at no additional cost. When the solution falls outside the normal requirements, we have the expertise and engineering personnel to solve those problems. By working with you at the design stage, we will develop a solution that lowers your overall product cost, improves product quality, increases the robustness of your manufacturing process, and gets you to market faster.

Improves the run-in lubrication of new or overhauled machines and increases the load-carrying capacity Improves the lubricating properties of the oil under high loads and at high temperatures Reduces operating noises and wear Advantages and benefits Forms a pressure-resistant layer with high lubricating effectiveness Increase in the load-bearing share Reduction in the specific surface loading Lower thermal loading of the lubricant Considerably extended service lifeShake or stir well before use. Depending on loading, add 2-3% to engine oils and 3-5% to machine- and gear oils. Instructions of the machine manufacturer have to be observed. Mixing will occur in operation. Mix with appropriate lubricants only. Not suitable with water-based lubricants and polyglycol oils. Especially at older machines and machines normally used with unalloyed oils, the compatibility of OKS 30 with the installed gaskets has to be proved before application.

Indulge your senses with the savory allure of chicken offals, a culinary treasure brimming with distinctive flavors and textures. These delectable morsels, derived from various organ meats of the chicken, promise an unforgettable dining experience for adventurous food enthusiasts. Succulent and tender, each offal cut offers a unique taste profile, satisfying even the most discerning palates. From the rich, earthy essence of chicken liver to the delicate sweetness of the heart and the mouthwatering complexity of gizzards, every bite is an exquisite revelation. With their inherent versatility, chicken offals shine in an array of culinary masterpieces. Whether expertly sautéed with aromatic herbs and spices, simmered to perfection in a hearty stew, or charred to a delectable crispness, their flavor potential knows no bounds.

Additional casings made of Fortron PPS Plastic parts for water circulations pumps / auxiliary car heating

The ALW is a comfortable, ergonomic, and compact seated workstation that offers plenty of legroom, and which can be adjusted to the height of the operator via the height-adjustable foot plate. The observation lens offers a variable viewing angle from 10° – 50°, thus ensuring comfortable working. The closed, laser-proof housing makes the ALW a laser-protected workplace that can be used in a normal production environment without additional safety precautions. The laser system is easy to operate. In addition to configuring via the display, the laser parameters can be adjusted via the patented multifunction footswitch or adapted accordingly during welding. The large doors of the ALW can be opened wide. This facilitates easy loading.

Handle including adapter for insertion into the slots on the front of the systainer®. Allows for the systainer® T-Loc I + II and MIDI-systainer® T-Loc II to also be carried upright Additional front handle with adapter plates, for carrying the systainer® T-loc I + II and MIDI-systainer® T-Loc II upright Please note: adapter plates have to be inserted into the plug-in slots

High-flexible copper-based ropes, enclosed by an additional braid, made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys (upon request) in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.10 mm. Cross-section ranging from 0.35 mm² to 120 mm² (bigger cross-sections upon request). Our ropes with overall braids are characterised by their good flexibility and their excellent mechanical strength. The overall braid has a vibration-reducing function and prevents unrevelling of the rope. Ropes with overall braids are mainly suitable for automotive, industrial applications and for connectors.

4D_Additive reads all common CAD-formats with the PMI and processes them as an exact B-Rep geometry. Hereby makes it possible to test, repair and prepare the 3D-models according to the CAD engineering standard. The software has innovative features such as 3D-nesting, collision checking and distance control for automated and safe assembly of the installation space. The dynamic roughness analysis can be used to determine the optimal alignment of the components in order to generate the best possible surface. Another module is to generate automatic support geometry, which is necessary for SLA or SLM. The innovative Texture Module, allows the user to access more than 5,000 different texture surface structures. With the latest version of the 4D_Additive Software Suite, we presenting a new batch tool for a fully automated, fast and reliable nesting.