100 - Import export

Suitable also for welding precision mechanical parts and medical technology components as well as for the manufacture of sensors and electrical components The ALS 100 is an ergonomic workplace The spacious work chamber offers a very brightly lit work area and is loaded via two side doors. The average power of 100 W enables a fast pulse sequence (up to 25 Hz) and thus fast work even at high energy settings. The homogeneous fusion of the materials results in welding results of the highest quality. The laser is used in the manufacture and repair of jewelry, in precision engineering or when welding sensors

Particular Challenges: The seal surfaces in this case are made of very glossy metal, with the drawback of emitted reflections. This effect during an optical measurement must be eliminated. Furthermore, it is absolutely necessary to guide the laser scanner on a linear path over the surface, since fluctuations of distance may falsify the measurement result. QuellTech Solution: The Quelltech model Q5 disposes of an adequate resolution in X and Z direction and proves to be able to verify the planarity tolerances and to measure the size of defects. Meanwhile a precise rotary axle, used as guiding element, moves the scanner over the surface to be evaluated. Interfering artefacts caused by the glossy finish are suppressed by particular algorithms integrated within the software. As an encoder value is permanently supplied by the rotary axle, the position of each scanner profile within the point cloud can accurately be determined.

Wear is a damage consisting in gradual removal or deformation of material on solid surfaces, caused by mechanical (e.g. erosion) or chemical (e.g. corrosion) influences. In machine elements, wear may give rise to material failure or loss of functionality. For the application in question, our client has to measure wear on the surface of rollers in cement mills. Up from a certain depth, reactions are required, generated by a warning system to be developed In this project, we used several robust QuellTech Q6 scanners to cover fully the roller width. Due to the high rotational speed of the rollers, we preferred our fastest scanners for this application. We furthermore developed a software solution and implemented a warning system, based on the critical depth of the wears on the surface. By means of this system, the customer can determine the correct time for exchange of the rollers.

Particular Challenges: In the course of the production, endless cables are running at a considerable speed, and supervision has to be carried out nearly under real-time conditions. The size of the objects to be determined, i.e. of the flaws to be discovered, is in the range of only some hundredths of a mm. Another difficulty is the fact that surfaces with very different reflectivity and roughness are involved. In order to be able to check the cables all around, several laser scanners must be in place, mounted at different angles, thus covering the entire range of 360°. Quelltech Solution: The solution consists in a configuration of four Q6 laser scanners, mutually displaced by 90°, so the entire surface of the cables is in the field of view. On the basis of the 100% inline inspection, the position of defects can precisely be determined, without losing too much time.

An experienced, in-house team of test and analysis specialists stands for the peak of quality – product-specific and exactly as you, the customer, desire it. To ensure quality in serial manufacture early on and guarantee a frictionless start of production, test equipment is incorporated into manufacturing processes and automated production lines. When planning tests, we work to your test specifications or develop a cost-optimised, efficient concept. In our tests, we simulate real usage conditions. In this way, we make sure that devices, systems or components will function correctly. Quality management at PRUFREX also includes developing efficient testing strategies.

The TLS 100 tube sensor works on the capacitive measuring principle and detects the presence of a liquid in a plastic tube. These plastic tubes may also be mounted as a by-pass on a compensator in order to signal the required medium level in containers. The sensor is simply snapped onto the tube at the ideal level of the medium and provides versatile usage for a wide range of applications in medical equipment, the food stuffs industry etc. The sensor can additionally be fixed by means of the two mounting lugs to ensure a tight fit on the tube. Caution The switch point is factory pre-set so as to lie exactly between the two mounting clips. When readjusting the switch point, please observe that it again lies between the two clips. A mass surface in the proximity (< 10 mm) may influence the switch point and may necessitate a readjustment.

DHS 100 4 - 10 0,3 m recessed washable

MMP 100 2 - 3 1

MFP 100 2 - 5 1

MFP 100-R 2 - 5 1

The modular system of the MBS series is available in three sizes. The MBS 100 is the "smallest" of the three models and processes materials such as tubes and profiles of up to 90 mm wide. Depending on the material size, further machine elements such as type and number of cutting tools, length and width of the belt feed, control, feed, running direction, coating material of the conveyor belts and base frames are selected. Metzner "MBS series" cutting machines stand for outstanding flexibility when machining flexible and semi-rigid profiles made of rubber and plastic. With different cutting methods and machine components, cutting machines are created which can be individually adapted to customer requirements and are made available in the shortest possible time with hardly any development effort.

DSS 100 N 1 - 12 1,25 m raised

MMS 100/200 2 - 3 1 - 2

MMP 100-R 2 - 3 1

Metzner offers low-cost individual stations in the field of e‑mobility for the entry into high-voltage cable processing. For the first time, the EM 101 module offers a solution for removing the cable foil without affecting the cable shield. The automatic processing of high-voltage cable wires also necessitates the connection of various components of the connector system. The Metzner EM 102 takes care of this. The EM 103 allows the cable shield to be opened and cut using a patented process which ensures that there is absolutely no contact with the inner insulation. The EM 103S offers the functionality of the proven EM 103 to meet the requirements of smaller cable wires of up to 8 mm diameter. These cost-effective models cannot be integrated into an automation line and are equipped with only limited traceability functions.

Integrating spheres with precise machined housings. Features: 4 in / 100 mm dia sphere. 15 mm dia measurement port. Detector port. 98% synthetic coating.

Precision power supply for lamps up to 100W. Features: PWM power supply for the precision operation of halogen or LED lamps in constant current mode. The 16 bit D/A converter enables very accurate current setup and adjustment. For stress free switch on/off, the operation current is controlled with adjustable ramps.

Integrating spheres with precise machined housings. Features: 4 in / 100 mm dia sphere. 15 mm dia measurement port. +8°, -8° and 0° ports with plugs. Detector port. 98% synthetic coating.

Hollow sphere of the UM series modular construction integrating spheres. Features: 4 in / 100 mm dia sphere. 97% barium sulfate coating.

100 % Para-Aramid continuous Fiber with PTFE-Blocking Agent and Silicone free dynamic Run-In Lubricant Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Excellent in highly abrasive products Wear resistent universal packing Minimized monitoring, short run-in period Shafts or shaft sleeves in HRC 60 recommended Operating range Pressure [p max]: 25 bar, Velocity [v max]: 25 m/s Pressure [p max]: 500 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 250 bar Temperature: t = -50… +280 °C pH: 2 - 12 Density: 1.25 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Kneader Agitators Autoclave Refiner Suitable for All industries Chemical industry Waste water technology Pulp and paper industry Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special...

Multi Task Platform JUKI’s JM 100 is characterized by a significant increase in speed compared to the previous generation. The machine enables the component placement time to be reduced to 0.6 seconds for the vacuum nozzles and 0.8 seconds for the grippers. Tha machine has the TAKUMI head with an automatically height adjusting laser to optimize speed.Active clinching and 3D Recognition is available.

Galvanic non-isolated DC/DC wide range input Rugged construction Parallel connectable without control lead Input filter versus disturbances of thyristors drives Efficiency up to 95% Non-isolated output Regulated output

regulated 2:1 input range Efficiency to 85% Continuous short-circuit protection Input/Output isolation 1500VDC min. EN60950, CE 5-sided metal case 100W isolated output 500kHz switching frequency

Scope of application: -Suitable for heavy machining work, single pieces and small batches -Designed particularly for use on conventional milling machines Product features: -Clamping force preselection, 2 to 4 increments, allows accurate repetition (type 100 – 2 increments; types 125, 160 – 4 increments) -Our tried and tested HD vice enables problem-free working with high clamping force and long-term reliability

Sealing compounds for crown corks The EPSeal 100 series is designed for crown corks and can be used for carbonated beverages including lemonades, beer, mineral water, juices and milk based drinks. Different versions accommodate all the beverage processing systems including sterilisation. Additional versions address steel down-gauging as well as twist off crown applications. Our laser marking versions support beverage promotion strategies. Oil free grades are also available. Tested by Nehring and VLB Berlin Odour and taste of a mineral water stored in a light box and sealed with a crown cork lined with EPSeal 100 had no taste or odour deviation. The crown corks lined with EPSeal 100 were classified as Type A according to the STLB. Download EPSeal Product Guide

precision slides with ball screws or trapezoidal screw drive. - Three sizes – 100, 155 and 225 - Cover variants – sheet or bellows cover - Traversing carriage available in two lengths - Various stepper and servo motors, controllers, special versions such as - Motor deflections via timing belt drive make the precision slides universal can be used and are optionally available with or without motor. - Integrated limit switches (inductive proximity switches) with cable entry or plug connection in the endplate. - Base plate and end plates are made of a surface-treated and high-strength aluminium alloy. - Modular use, e. g. as multi-axis systems