Machining centres - Import export

In metal-working shops utilising swarf-producing manufacturing techniques, the generated swarf is often an underestimated cost factor: This means your expensive machine tool cannot attain its full productive potential. The key challenge here is therefore: PROCESS RELIABILITY But there is another way. In fact, there are several proven solutions – centralised and decentralised – to this problem. ERDWICH machines and plant for swarf shredding and processing offer the highest levels of economic viability, safety and efficiency. With the decentralised solution, the ERDWICH swarf breaker is set up directly next to the lathe or machining centre. The swarf is removed and transported away to a central processing point either manually using a swarf cart or by means of pneumatic extraction, pumping or some other conveyor system. With the centralised solution, the swarf is collected in swarf carts at each machining centre and then transported to the ERDWICH master processing plant. This...

Scope of application: -Can be applied horizontally or vertically – therefore suitable for vertical and horizontal CNC milling machines -Conventional clamping, gripper clamping or pull-down clamping are all possible -TITAN 2 K – ideal for use on five-axis machining centres -Clamping unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece -With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely and economically. Product features: -High versatility – the modular clamping system combines practically all the possibilities of our tried-and-tested models -High-pressure spindle with power intensification. Clamping force does not slacken -Enlarged clamping span for secure clamping of unmachined parts -Lost clamping margin 8 mm with pull-down, 3 mm with GRIPPER -Clamping near to neutral axes -Clamping jaws of forerunner are compatible

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -Ideal for use on 5-axis machining centres -Reliable and fast clamping of unmachined parts, flame-cut and sawn materials with gripper jaws -Clamping of parallel pre-machined workpieces with optional step jaws -Gripper studs suitable for materials with a strength of up to approx. 1000N/mm² Product features: -Optimum accessibility for 5-sided machining thanks to the combination of compact base and large clamping width -Stamping and clamping in a single process, in the working area itself, without any additional accessories -The movable/pivot support jaw allows different workpiece contours to be clamped -Gripper studs can be changed without tools and are easy to adjust by hand -Operation with a torque wrench – max. 30 Nm -High-pressure spindle with power intensification

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -For automation of machining centres – particularly suitable for batch production Product features: -Extreme accuracy for your machining -The clamping force is generated via the pressure from a hydraulic unit with a hydraulic clamping stroke of up to 4.5 mm -The clamping force is steplessly adjusted by regulating the hydraulic pressure on the hydraulic unit. A hand crank is provided for coarse adjustment of the clamping range -The spindle contains a single-acting hydraulic piston and an additional Belleville spring assembly

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -For automation of machining centres – particularly suitable for batch production -The hydraulic spindle also enables the use of support jaws with which a wide range of unmachined parts, from flame-cut and sawn materials through to complex castings, can be clamped securely and economically. Suitable for materials with a strength of up to approx. 1000 N/mm². Product features: -Extreme accuracy for your machining -The clamping force is generated via the pressure from a hydraulic unit with a hydraulic clamping stroke of up to 4.5 mm -The clamping force is steplessly adjusted by regulating the hydraulic pressure on the hydraulic unit. A hand crank is provided for coarse adjustment of the clamping range -The spindle contains a single-acting hydraulic piston and an additional Belleville spring assembly

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -Ideal for use on 5-axis machining centres due to its compact design -With support jaws, unmachined parts with varying types of flame-cut and sawn materials and even complex castings can be clamped safely and economically. Gripper studs suitable for materials of mechanical strength of up to approx. 1000 N/mm². Product features: -The centre is adjustable. The position of the workpiece stays within set boundaries. -Repeating accuracy ± 1/100 mm for angled workpieces -Clamping range presetting via adjustment of clamping jaws along transverse slots of spindle nuts -Moulding and clamping in a single step, directly in the work area – no auxiliary aids required -Fully enclosed and maintenance-free high-pressure spindle – high chip protection, minimum cleaning requirements, constant clamping forces up to 40 kN

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -For automation of machining centres – particularly suitable for batch production Product features: -Extreme accuracy for your machining -The clamping force is generated via the pressure from a hydraulic unit with a hydraulic clamping stroke of up to 4.5 mm -The clamping force is steplessly adjusted by regulating the hydraulic pressure on the hydraulic unit. A hand crank is provided for coarse adjustment of the clamping range -The spindle contains a single-acting hydraulic piston and an additional Belleville spring assembly

Scope of application: -For horizontal & vertical usage-suitable for CNC controlled milling machines & large machining centres -Clamping unmachined parts, saw-cut or flame-cut material by penetration of hardened, replaceable gripper elements into the workpiece -With the support jaws, unmachined parts in highly varied materials, or with complex geometries, can be clamped securely -Gripper studs suitable for materials with a strength of up toapprox. 1000N/mm² Product features: -High versatility – the modular clamping system combines practically all the possibilities of our tried-and-tested models -Fully compatible with the accessories of the LC/TC 160 series, for example gripper studs, universal gripper set & pull down sets -Grounded sides so that all sides can be used High-pressure spindle with mech. force amplifier for the safe clamping of raw parts in combination with gripping & pull down spring function -Lost clamping margin 8 mm with pull-down, 3 mm with GRIPPER

5AxesCNC Femto Laser processing machine type stoba FocusONE microprecise drilling and machining Machine concept for mechanical premachining and laser finishing of bores. Bores from ø 25 μm Laser efficiency approx. 95% 5axis kinematics with positioning accuracy ± 1.0 μm Rigid granite frame with integrated machining axes for up to three machining positions Frame and axes with water cooling. Temperature stability ± 0.1 Kelvin Mobile control panel with Beckhoff Twin CAT Working area of processing stations can be viewed via HD camera Feeding of the workpieces by means of a vibration conveyor Two different workpiece types can be processed simultaneously Machine set up for high throughput with highest precision