Machine construction - Import export

Construction machines must be flexible in use. Whether in civil engineering, demolition, gardening and landscaping, recycling and waste management or in the forestry and timber industry: construction machines are used in a variety of ways to achieve high profitability and economic efficiency. KAUP offers a wide range of attachments for construction machines - almost every attachment can be combined with a wheel loader, skid steer loader, telescopic loader, wheeled excavator, crawler excavator or any other construction machine.

In the food industry or machine construction; for sanitary products or even toys... ...side gusset plastic bags, sacks and pouches offer sturdy, practical packaging for your products and protect them from harm. Our versatile side gusset bags can also be used as liners for cartons and cardboard boxes. Side gusset bags get their name from two folds, or gussets, made along the sides of the bag that create extra volume. Side gusset bags and sacks are excellent for packaging larger items that don’t otherwise fit in conventional flat bags.

Cleaning of cooling devices, beverage and goods vending machines Cleaning of tiles, ceramics or natural stone Cleaning of construction machines and lorries, tarpaulins Cleaning of machine tools and workshop floors Advantages and benefits NSF A1 registered No classification marks according to (EG) No. 1272/2008 Free of organic solvents and phosphates Readily biodegradable Good separation behaviour Gentle to plastics, seals, rubber and sensitive metal surfaces Depending on the degree of soiling, can be diluted up to 1:10 Suitable for use with high-pressure cleaners MOSH/MOAH-free

Lubrication of open pinion gears which are highly subject to wearing due to corrosion and continuous soiling, e.g. on construction machines, spindle presses, crushers, mills, windlasses, rubbish disposal devices, ship´s lifting jaws or water structures Wire cables subject to outdoor weathering, e.g. on crane systems, lifts and aerial tramways, ship´s and offshore equipment for diverse types of sealing lubrication, including of coarse chains and chain transporters Advantages and benefits Highly effective due to outstanding wetting and lubricating properties Decreased friction and wear, and therefore reduction of necessary repair times Economical due to thrifty consumption as a result of small application quantities and time-saving use due to advantageous spray form Dry, elastic film with high adhesive strength prevents adhesion of dust and dirt Waterproof and has good corrosion protection properties

Supplementing material properties Whether it’s the automotive industry, medical technology, or machine construction: the demand for material and resource-saving development runs throughout many industries. New, lighter weight materials and new kinds of material combinations offer possible solutions. However, such solutions frequently require a specialized surface coating that balances material properties, technological requirements, and specialized operating conditions to be successful. This balancing act places high demands on system technology, which must ensure these key attributes for ever more complex components in perfectly controlled processes.

High strength ePTFE-Graphite Characteristics Extrusion resistant even with large clearances Form stable, wear resistant, heat conductive and can be used as bull ring Shaft protecting (recommended surface hardness: HRC 25) In high pressure applications die formed rings are recommended Operating range Pressure [p max]: 30 bar, Velocity [v max]: 8 m/s Pressure [p max]: 800 bar, Velocity [v max]: 3 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.35 g/cm³ Main application High pressure plunger- and dosing pumps Bullrings for mixers, highpressure valves agitators, gate valves and valves Suitable for Chemical industry Petrochemical plants High pressure machine constructions Approvals BAM for liquid and gaseous oxygen 60 °C/15 bar, 40 °C/65 bar, 200 °C/50 bar Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg...

Application Heavy cylinder heads of large diesel engines can be safely and easily clamped onto the extremely stable WV Cylinder Head Stand to perform maintenance and repair work. If required, the WV can be also used for storing a spare cylinder head. Features The cylinder head mounted on the WV Cylinder Head Stand can be rotated through 360° and locked in any position which is most suitable for the work to be performed. A removeable tray provided in the bottom frame collects any liquid from the cylinder head. Antivibration pads are provided at the bottom frame which are to be secured to the floor so that the stand cannot fall over when mounting and servicing the cylinder head.

Application The portable HD 2500 is designed for delivering high hydraulic pressure up to 2500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 2500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

Application The portable HD 1500 is designed for delivering high hydraulic pressure up to 1500 bar required for operating hydraulic tools, especially hydraulic tools for loosening and tightening the clamping connections provided at large diesel engines. Capacity hydraulic pressure up to 1500 bar. Drive medium Compressed air with at least 6 bar. Features The hydraulic pressure is adjustable up to 1500 bar. Up to four hydraulic tools can be supplied simultaneously.

Application The NTS is designed for testing and servicing fuel injectors of large diesel engines. Use NTS for examining the spray pattern, for leak testing of the needle seating and for. Features The infinitely adjustable testing pressure is is generated by means of an air powered double acting high pressure pump. The attachment for clamping the fuel injector is of rigid design and swivel-mounted so that the injector can be turned to horizontal position for ease of servicing. The transparent container for collecting the testing liquid is provided with an outlet for removing the liquid by suction.

Application The HMB Honing Rigs are designed for honing cylinder liners removed from the engine block with the corresponding mobile Hunger PHM Honing Machines. - Honing Rig Type HMB 340 is tailored to the Honing Machine Type HBM 340. - Honing Rig Type HMB 640 is tailored to the Honing Machine Type HBM 640. Features Rigid base structure including upright supporting tubes for mounting the mobile PHM Honing Machine. The liner to be honed is placed on top of a honing liquid reservoir which is slideably mounted on the base structure. The reservoir can be drawn out for ease of loading and unloading of the cylinder liner by means of a crane. An electric pump is provided to supply honing liquid to a spray nozzle. The spray nozzle is mounted on a magnetic base which can be attached to the frame tube to direct the honing liquid to the area to be honed.

Application With the mobile honing machine PHM, the cylinder liners of large diesel engines can be honed in the crankcase when installed. The stationary honing machine base HMB is required for honing removed cylinder liners. An optional comfort control panel including the regulator valves and the manometer gauges can be provided at the lower end of the preassembled drive unit within easy reach of the operator while standing at cylinder liner level. A single central air treatment unit with air filter and lubricator is also provided for trouble free operation. Automatic stroking is available as a option. The stroking lenght can be adjusted by means of end stops.

Bomag BT 65 rammer for frequent use Fields of application: - Earthwork and asphalt construction. Pipe and conduit construction - Trench and canal construction, backfilling, foundations and repair work on asphalt. For frequent use with the highest demands on compaction results and efficiency. - Most powerful rammer in its class - Proven Honda 4 -stroke engine - Optimized full engine protection - Double air filter system - Hour meter and tachometer - On/Off safety switch for simultaneous switching on and off of engine and fuel supply in one hand movement Incl. 3-2-1 original Bomag warranty!

The Husqvara K 770 is a powerful all-round cut-off machine with features that make it one of the best cut-off machines on the market.The semi-automatic SmartTension ™ system enables optimal power transmission, minimal wear and maximum belt life. The light weight, outstanding power-to-weight ratio, reliable starting mechanism and exceptionally low vibration mean less stress and maximum productivity. SPECIFICATIONS: ENGINE: Output power: 3.7 kW Max. recommended speed: 9,300 rpm Speed at max. output: 9,000 rpm Cylinders: 1 Number of strokes: 2-stroke engine Exhaust emissions (CO2 EU V): 711 g/kWh Power source: Petrol CUTTING EQUIPMENT: Max. Cutting depth: 125 mm Max. Cutting disc diameter: 350 mm Pick up diameter: 20/25,4 mm Max. Cutting disc thickness: 5 mm Max. speed: 90 m/s Coolant: Wet

Application The VDS1A is designed to reface valve seats of the engines of motorcycles, cars and light commericial vehicles. Features The VDS1A refaces the valve seat in a lathe-type facing action. A gear head includes a feed mechanism for continous outward transverse motion of the single point turning tool when the VDS1a is rotated around a pilot inserted in the valve guide. The direction of the feed motion is defined by an exchangeable adapter head screwed to the gear head. A steady rest which is mounted on the cylinder head stabilizes the VDS1A below the crank handle. The steady rest eliminates runout when rotating the VDS1A around the pilot. As a result, the seat is refaced to concentricity with the valve guide under the correct seat angle.

Application The Hunger SHM is designed for precision honing of cylinder liners with bore diameter from 150 to 640 mm. Features • Air powered honing. Powerfull air motor for rotary motion of honing head, air hoist for stroke motion and, as an unique feature, air cylinders for stone feeding. • Superior control. Manual buttons are provided for fine adjusting setting of honing head RPM, stroking rate and stone feeding pressure. • Pressure gauges for displaying the selected setting of honing head RPM, stroking rate and stone feeding pressure. • Two-hand control actuation to protect the operator according to the stringent EC safety regulations. • Automated stroking between adjustable end stops. • Drawer-type honing liquid reservoir acting as support for the cylinder liner and mounted on casters for ease of loading and unloading the cylinder liner.

The F-Line - the perfect compulsory mixer for every application, meeting your requirements optimally and economically. Advanced technology, for performance and environmentally friendly operation. The standard gearbox runs at 32U/m, with the Vario gearbox the revolutions can be varied between 9 - 55 U/m. The highlights at a glance: - Powerful and very robust motor/gearbox. - Optimal performance and easy handling - Easy cleaning and maintenance - Fast, effective mixing with large capacity - Optimal mixing functions BARON F-120: - Safety circuit when lid is opened - Position bolt for lid safety during use - Motor protection prevents contamination - Simple and efficient operation - Adjustable mixing blades - Optional rubber blades Attention!!! In order to be able to connect the unit to a normal Schuko socket, the CEE to Schuko adapter must also be ordered under the Optional accessories tab.

The precise machining system for high reproduction accuracy with optimal surface quality The precise shape processing system for high image accuracy with the best surface quality Suitability for high precision spatial shapes in the shortest time NCcontrolled precision vertical axis with integrated electromagnetic oscillation Granite machine construction Zeropoint clamping system as interface for the cathode holder Generator up to 10,000 A at 15 V DC with integrated pulse function Controller Beckhoff machine and process control Version as twostation system for manual or linked automatedoperation

In close cooperation with machine manufacturers from all over the world, thodacon GmbH develops, manufactures and improves telescopic steel covers for all requirements, suitable for a wide range of different machine tools. Whether horizontal, vertical, oblique or transversal - there is no installation situation for which there is no optimum thodacon cover. Difficult guidance geometries or unfavorable space conditions in special machines are solved by individual constructions. The covers impress with their robustness and reliability.