Lubricating oil - Import export

Lubrication of friction and rolling bearings, chains, joints or slideways at higher temperatures For conveying systems under radiation heat in painting, stoving and drying systems, travelling grates in firing systems Dry lubrication at temperatures above 200°C Lubrication of elastomers and plastics not resistant to mineral oil Advantages and benefits Highly suitable as a high-temperature lubricant Very effective due to finest, homogeneous MoS₂ distribution in the oil Resistant to water and many chemicals, fuels, lubricants and hydraulic oils For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. If at all possible, avoid excess. Observe the machine manufacturer's instructions. Assess the lubrication frequency

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors Also available as spray version OKS 671

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors

In addition to our wide range of oils, lubricants and fluids, we supply your business with technical accessories for smooth operation in the workshop, factory and production. Our technical products meet the highest quality standards and are produced by renowned brands. For the optimum selection of oil pumps, grease guns and storage technology for oils, greases and fluids, our specialist advisors will support you from the very first minute.

Wrapped bronze sliding bearing with lubrication pockets/ CuSn8P (DIN 17662) | Low-maintenance | DIN 1494 / ISO 3547 BRO-MET® is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. Due to the lubricant depots, relubrication intervals are significantly reduced! High load capacity and strength with low wear, suitable for rough operation, corrosion resistant. High load capacity and stability at low abrasion, suited for rough operation, corrosion resistant. For technical details, please visit the product page on our website!

Wrapped composite sliding bearing steel / POM | low-maintenance | With lubrication pockets | DIN 1494 / ISO 3547 POM-MET® is a low-maintenance composite sliding bearing with a POM coating. Initial lubrication is required. Both oil or grease lubrication are possible. Due to the lubricant pockets, relubrication intervals are significantly reduced! Suitable for all sliding movements, good load capacity, robust and resistant to dirt. Suitable for grease or oil lubrication and all kinds of movement, good load capacity, robust and insensible to dirt. For technical details, please visit the product page on our website!

Wrapped composite sliding bearing steel / Special PTFE coated Maintenance-free dry sliding bearing | DIN 1494 / ISO 3547 TEF-MET/P is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, it is very well suited for lubricated applications (e.g. hydraulic oil lubrication). For technical details, please visit the product page on our website!

Multipurpose oil for bearing, lever and joint lubrication Hydraulic oil for use in all areas in which physiologically harmless are required Compressor oil for piston compressors for prescribed oil ISO VG 100 Advantages and benefits NSF H1 registered Long economic operating times thanks to optimal additives against oxidation and ageing Good cold behaviour Resistant to cold and hot water, steam as well as disinfectants and cleaning agents For universal use due to long-term lubrication and high adhesive strength Good wear protection Tasteless and odourless Conforms to VDL requirements

Lubricating oil additive for heavily loaded friction and rolling bearings for increasing the lubricating effect, improving the high-pressure properties and reducing the temperature increase Gear oil additive to guard against gearwheel damage Stops pitting and is especially suitable for gearbox designs with a high percentage of sliding Engine and compressor oil additive for reduced wear and increased operating safety, as run-in and smoothing lubricant Machining oil additive for chip-free or cutting production to increase working speeds and tool life Advantages and benefits Excellently suited as performance-increasing additive, as additive to bed track oils, engine oils, C/CC oils and slightly alloyed industrial oils Highly effective due to finest, homogeneous MoS₂ distribution in the oil Broad range of uses with many different oils and alone as a high-performance oil Lowest friction due to high lubricating effectiveness of MoS2 Fully stabilised without precipitation

Wrapped bronze sliding bearing with lubrication holes/ CuSn8P (DIN 17662) | Low-maintenance | DIN 1494 / ISO 3547 BRO-MET®/L is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. The hole depots reduce the relubrication intervals even more! High load capacity and strength with low wear, suitable for rough operation, corrosion resistant. High load capacity and stability at low abrasion. Because of perforations lubrication clearances are reduced to a minimum! For technical details, please visit the product page on our website!

Fully Automated/Computerized Distillation System for fractionating of crude oil samples, atmospheric residues resp. vacuum distillations of lubricating oil samples up to very low operation pressure (high vacuum HV Operation pressures down to 0.005 mmHg, allowing fraction temperatures up to 600 °C AET). The unit is equipped with an automatic fraction collector (FC) and combined automatic fraction discharge into final receivers, which are closed automatically. The fraction volumes and weights are determined by builtin volume follower system and internal balance (included software "FCExtension" allows to operate very narrow fractions by using max. 40 receivers).

The reliable generation, transmission and distribution of power can only be ensured with flawless technology in power plants – regardless of whether the focus is on crude oil, coal, natural gas, water or renewable energies. In order to meet the considerable predicted power consumption requirements worldwide, we are ready to provide assistance, with our products and our many years of experience in all of the stated applications with our two, three and four-spindle screw pumps, as a reliable partner. However, our pumps are not just found in power engineering plants such as power plants. When it comes to power transmission, our two and three-spindle ranges have been used successfully for many decades.

Light-colored piston lubricant with special additives for better adhesion and lubricating properties Type viscous oil Appearence light-coloured Properties and Advantages • increased service life of piston and shot sleeve • economical in use • reduced smoke and gas development

Plunger oil (lubricant) with ultrafine graphite for extremely good adhesion Type medium-viscous graphite oil Appearence black Application drip, spray suitable for "vacuum" die casting Properties and Advantages • well balanced tribological characteristics • despite 10 % graphite in medium-viscous oil product is sprayable and perfectly stable • high pressure resistance • highly efficient, economical in use • protection from erosion • dry-running operation feature • recommended for Caro-Prometa plunger systems