Hydraulic units - Import export

Assembly immediately upon receipt of order - generally in stock Umbausatz Hydroaggregat Mit diesem Umbausatz kann die Hydraulikpresse S 2.1M Ecoline wie gewohnt mit der Handpumpe oder mit dem ... Category Hydraulic hoses and fittings / Machines and tools / Hose press / Hydraulic unit Product number supplier 43381008

EP/AW hydraulic oils (HVLP) based on mineral oil with a high viscosity index Description The oils in the Castrol Hyspin AWH-M series are hydraulic oils with a high viscosity index (VI) and are characterized by a significantly lower temperature dependence of the viscosity compared to other hydraulic oils . They are based on solvent raffinates and contain shear-stable VI improvers, oxidation and corrosion inhibitors, as well as zinc-containing wear protection additives. Application Due to the good viscosity-temperature behavior, the Castrol Hyspin AWH-M series is used particularly in outdoor hydraulic units that are exposed to greatly fluctuating operating temperatures. The hydraulic oils of the Castrol Hyspin AWH-M series are classified as follows: DIN 51502 - Hydraulic oils - HVLP ISO 6743/4 - Hydraulic oils type HV The hydraulic oils of the Hyspin AWH-M series comply with the following requirement standards and specifications (depending on the viscosity):

Hydraulic units 12/24 V Application: Lifting platforms, tailgates, work platforms, loading cranes, additional aggregates Category Hydraulic systems, valves and components / Power packs / Power packs Product number supplier 46003122

Hydraulic units 12/24 V Application: Lifting platforms, tailgates, work platforms, loading cranes, additional aggregates Category Hydraulic systems, valves and components / Power packs / Power packs Product number supplier 46003122

The BC-series impresses with its simple and robust technology, while at the same time offering the user many features to simplify work. The optionally available semi-automatic plate shifting allows the user to shift the filter elements conveniently. The hydraulics are controlled via the HMI control system with touchscreen. This allows any feeding pump of your choosing to be integrated and controlled. There are plates available in the formats 800, 1,000 and 1,200 mm, allowing for filtration surfaces of up to 178 m². Thanks to the gasketed design, a clean environment is ensured, even during the internal flushing of the filter elements with aggressive media. The individual discharge manifold enables many functions such as displacement air drying, turbid flow, clear flow, flushing and also cake washing. The standardised hydraulic unit is used in both the BC-series and the AF-series.

EP/AW hydraulic oils (HVLP) based on mineral oil with a high viscosity index Description The oils in the Castrol Hyspin AWH-M series are hydraulic oils with a high viscosity index (VI) and are characterized by a significantly lower temperature dependence of the viscosity compared to other hydraulic oils . They are based on solvent raffinates and contain shear-stable VI improvers, oxidation and corrosion inhibitors, as well as zinc-containing wear protection additives. Application Due to the good viscosity-temperature behavior, the Castrol Hyspin AWH-M series is used particularly in outdoor hydraulic units that are exposed to greatly fluctuating operating temperatures. The hydraulic oils of the Castrol Hyspin AWH-M series are classified as follows: DIN 51502 - Hydraulic oils - HVLP ISO 6743/4 - Hydraulic oils type HV

1000-fold proven components of the KAUP modular design combined in a particular way: these make up KAUP Stationary Material Handling Equipment. They consist of project related system solutions which can be integrated in every production process. Our devices have already been implemented for handling bagged products such as sugar or cement. But also in goods handling and storage of consumer goods and beverages, when turning sheet metal or paper sheets for processing on both sides, our application orientated devices are in great demand. The majority of our equipment is driven by a hydraulic power unit. They can be controlled automatically, semiautomatically or manually and so optimally adjusted to the customer requirements.

complete for hydraulic unit Uni Future 2051

complete for hydraulic unit Uni Future 2050

Technical data ED 100 To drive the nitrogen charging apparat «SL 230 SLG» and all crimping and cutting tools. Designed for continuous use Maximum pressure: 850 bar Delivery volume: up to 0,8L/min Fitting to all tools with oil demand up to 700cm³ Shiftable automatic detection of pressure requirement with switching off at the Essential working pressure from 20 to 850 bar Built in pressure sensor for improved functionality and enhanced adjustment Inching function for interrupted tool infeed Robust housing, operating elements and coupling are built in secured under body top Weight: ca.14 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data UNI FUTURE with pressure transducer Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg SUPPLIED WITH Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data UNI FUTURE 2050 SCU Also as a drive towards a cutting system Automatic detection with switch-off pressure required for achieving the required operating pressure of 20 bis 700 bar Suitable for all tools with a oil flow to 700cm³ With pressure gauge (1000 bar) and ground connector on the front side With pressure sensors for advanced features Detection tool with speed adjustment to (tool speed 10mm/sec) BG provision to fulfill Optional jogging for intermittent tool feed. Power adjustable,short time possible to 1,2 kW ch Network and battery (24/230V) Powerful Li-Ionen Battery 25,2 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy spaving mode– 10 minuets after the last activity or to low battery condition, switches off the unit Shutdown at idle after the working cycle, prevents tool damage and saves energy Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatic adjustment to 1l/min Size L/B/H: 222 x 168 x 229mm (Handle height 40mm) Weight: ca. 6,9 kg Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Technical data cube with pressure transducer and lock valve Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Keeps the pressure of max. 850 bar upon actuation of the stop valve Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg The lock valve for pipe crimping tools prevents reduction of oil pressure in the tool. So it is possible to hold hydraulic pressure over not time limited space. Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Safety cutting unit consisting of: Hydraulic power unit cube Integrated pressure gauge up to 1000 bar 10m High pressure hydraulic hose (metal free ), firmy connected to the cutting head Superlight cutting head ipr50HS Remote Control 3m Power charger 3m User manual Tool case The total weight of our 95 securty system weights about 17 KG and not 30 KG!

Tool bag for hydraulic power unit Uni Future 2050 High strengh grey polyester-woven fabric Waterproof > 0,2 bar High scouring resistance Protect your tools from external environmental influences (Dirt/Dust) Overall space-saving storage Easy handling Low weight DIMENSIONS: 350 x 280 x 300 mm

To view and download the brochure please click on the left image. This egglayer / block making machine is solid and productive. The COMPACT is suitable for the production of block elements up to a height off 330 mm. The stable, torsion-proof frame and the solid processing also enabel production under extreme climatic conditions. Control system Reliable control unit (Picture: semi-automatic version) for the precise control of the motion. Programming is possible according to desires of the client without programming unit. Inductive limit switches Contactless, space saving and wear resistant limit switches guarantee a secure and precise switching function. Control panel The control panel is easy to operate and was specially designed for the environment of concrete plants. Hydraulic Reliable, state of the art HAWE-hydraulic unit (picture: semi-automatic version). Security standrad High security standards in regards to working reliability and accident prevention. Frequency...

Lift castor system for a fast and flexible placing of plant and machinery or assembly tables; gear transmission ratio: 10:1 Max. Load: 500 kg per lifting unit Material: Housing: Die-cast aluminum with PTFE bearing Roller: Plastics PA with ball bearing Roller housing: Zinc plated steel Set: 4 lifting units 1 hydraulic drive unit 4 hydraulic pipes at each 3 m, pre-filled Extras: Other sets on request

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -For automation of machining centres – particularly suitable for batch production Product features: -Extreme accuracy for your machining -The clamping force is generated via the pressure from a hydraulic unit with a hydraulic clamping stroke of up to 4.5 mm -The clamping force is steplessly adjusted by regulating the hydraulic pressure on the hydraulic unit. A hand crank is provided for coarse adjustment of the clamping range -The spindle contains a single-acting hydraulic piston and an additional Belleville spring assembly

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -For automation of machining centres – particularly suitable for batch production Product features: -Extreme accuracy for your machining -The clamping force is generated via the pressure from a hydraulic unit with a hydraulic clamping stroke of up to 4.5 mm -The clamping force is steplessly adjusted by regulating the hydraulic pressure on the hydraulic unit. A hand crank is provided for coarse adjustment of the clamping range -The spindle contains a single-acting hydraulic piston and an additional Belleville spring assembly

Scope of application: -Horizontal installation – suitable for vertical CNC-controlled milling machines -For automation of machining centres – particularly suitable for batch production -The hydraulic spindle also enables the use of support jaws with which a wide range of unmachined parts, from flame-cut and sawn materials through to complex castings, can be clamped securely and economically. Suitable for materials with a strength of up to approx. 1000 N/mm². Product features: -Extreme accuracy for your machining -The clamping force is generated via the pressure from a hydraulic unit with a hydraulic clamping stroke of up to 4.5 mm -The clamping force is steplessly adjusted by regulating the hydraulic pressure on the hydraulic unit. A hand crank is provided for coarse adjustment of the clamping range -The spindle contains a single-acting hydraulic piston and an additional Belleville spring assembly

Scope of application: -Conventional and CNC-controlled milling machines – for efficient precision machining -Horizontal installation – great variability and flexibility Product features : -Excellent ease of operation guarantees optimal handling in every situation -Fast adjustment for clamping range preselection -The clamping force is generated and preset via the hydraulic pressure of a hydraulic unit -Integrated scrapers ensure functional reliability and minimise cleaning -Fixing on the machine table by means of mounting holes in the vice base. Additional holes can be made in the soft middle section of the vice base -Optional centre jaw allows two or more workpieces to be clamped -Coarse adjustment is performed by turning the spindle. The residual stroke of up to 4.5 mm is performed via a hydraulic unit with spring reset by means of a single-acting cylinder