Gears - Import export

Castrol Transmax Axle EPX 85W-90 is a high-pressure gear oil of API class GL-5 for highly loaded hypoid gears and final drives (AP axles). Castrol Axle EPX 90 protects against seizing and wear even under severe operating conditions. The gearboxes remain clean in the long term and are permanently protected against corrosion. Gearboxes lubricated with Castrol Transmax Axle EPX 85W-90 offer a high level of functional reliability. Advantages Excellent pressure absorption capacity Long-lasting wear protection Good corrosion protection Excellent foam resistance Good sealing compatibility Specifications API GL-5 MB approval 235.0 ZF - TE-ML 16C, 17B, 19B, 21A Application note Castrol Transmax Axle EPX 85W-90 is among the ZF registered with the following ZF release numbers: ZF003394

Castrol Transmax Axle EPX 80W-90 is a high-pressure gear oil of API class GL-5 for highly loaded axle drives and final drives (AP axles). Castrol Transmax Axle EPX 80W-90 can also be used in manual transmissions if the manufacturer requires an API GL-5 oil . Castrol Transmax Axle EPX 80W-90 protects against seizing and wear even under severe operating conditions. The gears remain clean and are protected from corrosion. Castrol Transmax Axle EPX 80W-90 ensures high functional reliability. Specifications API GL-5 MAN 342 M2 ZF TE-ML 05A, 12E, 16B, 17B, 19B, 21A Further information Transmax Axle EPX 80W-90 is

Castrol Syntrax Longlife 75W-90 is a fully synthetic axle gear lubricant for cars, heavy and light commercial vehicles and tractors. The performance reserves of Castrol Syntrax Longlife 75W-90 exceed the API class GL-5 and allow a significant extension of the existing oil change intervals (according to manufacturer regulations). Castrol Syntrax Longlife 75W-90 can be used in all axle drives and differentials without a multi-plate lock if a GL-5 lubricant with SAE 75W-90 is required. Advantages -Extremely high pressure absorption capacity -Excellent high-temperature stability -Significantly reduced gear oil temperature -Absolute shear stability -Excellent lubrication security at very low temperatures -Neutral sealing behavior -Excellent foam resistance -Extended oil change intervals possible (observe manufacturer's instructions) Specifications API GL-5 MAN 342 Type S1 Scania STO 1:0 ZF TE-ML 05A,12B,17B,19C,21A BMW (Non LS Rear Axles)

Castrol Syntrans V FE 75W-80 is a fully synthetic SAE 75W-80 gear oil with special EP performance, excellent synchronous behavior and fuel saving potential. It is suitable for transaxle systems, manual transmissions, transfer cases and axles where a gear oil according to API GL-4 is required. Castrol recommended Castrol Syntrans V FE 75W-80 for 5- and 6-speed manual transmissions from Volkswagen, Audi, Seat and Skoda. Application -VW Group: can be used in all 5 and 6-speed manual transmissions Audi: according to part number G 052 532 VW: according to part number G 052 171 in dry dual clutch transmissions Advantages Very low shifting forces even at low temperatures Good shear stability - long lubrication reliability with

in BMW manual transmissions . Application Excellent overload protection for highly stressed sequential BMW Motorsport transmissions (SMG 1 and 2) in M ​​vehicles. Best shiftability in the ZF 6-speed manual transmission of the Land Rover Discovery III (LR3). Can also be used excellently in the VW Touareg manual transmission according to VW part number G 052 798. Advantages -Excellent wear protection properties protect highly stressed transmission components -Very good low-temperature flow properties ensure good shiftability at low temperatures -High shear stability offers constant viscosity-temperature behavior over the entire -Excellent thermal and oxidative stability prevents deposits and leads to longer specifications API GL-4 ZF TE-ML 11

Castrol Syntrans AT 75W-90 is a fully synthetic manual transmission oil for commercial vehicles, especially for use in vehicles from the Mercedes-Benz Actros, Axor and Atego series. Advantages -Excellent thermal resistance -Very good wear protection, even under severe operating conditions -Excellently good synchronous behavior in MB commercial vehicle transmissions -Particularly resistant to aging Specifications API GL-4 MB Approval 235.11

Castrol Syntrans 75W-85 is a special fully synthetic manual transmission oil for commercial vehicles. With Castrol Syntrans 75W-85 it is possible to significantly extend the existing oil change times (observe the manufacturer's instructions). In conjunction with Castrol synthetic technology, Castrol Syntrans sets standards in terms of transmission life, economy and shifting comfort. Advantages -Fuel savings thanks to smooth running properties -Excellent wear protection -Reduces or eliminates shift hooks and noise -Excellent shear stability and aging resistance -Easy shifting at low temperatures -Extremely thermally resistant, therefore best protection in extreme use Specifications API GL-4 Volvo Transmission Oil 97307: 006 MB -Release 235.4 Eaton 500000km drain Europe (service bulletin 2273)

Castrol Axle EPX 90 is a high-pressure gear oil of API class GL-5 for highly loaded hypoid gears and final drives (AP axles). Castrol Axle EPX 90 protects against seizing and wear even under severe operating conditions . The gearboxes remain clean in the long term and are permanently protected against corrosion. Gearboxes lubricated with Castrol Axle EPX 90 offer a high level of functional reliability. Specifications API GL-5 MB release 235.0 ZF - TE-ML 16C, 17B, 19B, 21A

Aral gear oil SNS-AT 75W-90 is a fully synthetic manual transmission oil for commercial vehicles and is particularly suitable for use in Mercedes-Benz of the Actros, Axor and Atego series. Advantages Excellent viscosity - temperature behavior in a wide temperature range Very good wear protection, even under severe operating conditions Excellently good synchronous behavior, especially in MB commercial vehicle transmissions Particularly resistant to aging Specifications API GL-4 MB Approval 235.11

High-pressure gearbox oil in Aral synthesis technology. for use in manual transmissions, mechanical transmissions and steering systems use in commercial vehicles also for extended oil change intervals (please note manufacturer's instructions) Specifications API GL-4 MAN 341 Type Z4 ZF TE-ML 01L, 02L, 16K

Mineral oil-based transmission fluid for applications in which performance class API GL-4 is required. Approved for ZF manual transmissions. Advantages high thermal stability to protect against deposits and oil thickening ensures the operational safety and long service life of the lubricant and unit excellent wear protection and load-carrying capacity for long service lives Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A

Standard gear oil of so-called “moderate hypoid gear oils” for manual gearboxes, axle drives, transfer cases, overdrive gearboxes, overdrive clutches and steering systems. Application suitable for modern gearbox designs that do not require fully synthetic gearbox oil. Excellently suited for historic vehicles with manual gearboxes, also in conjunction with overdrive clutches, e.g. Laycock (note manufacturer's specifications). Specifications API GL-4 MB approval 235.1 ZF TE-ML 17A

Standard gear oil of so-called “moderate hypoid gear oils” for manual gearboxes, axle drives, transfer cases, overdrive gearboxes, overdrive clutches and steering systems. Application suitable for modern gearbox designs that do not require fully synthetic gearbox oil. Excellently suited for historic vehicles with manual gearboxes, also in conjunction with overdrive clutches, e.g. Laycock (note manufacturer's specifications). Specifications API GL-4 MB approval 235.1 ZF TE-ML 17A

Aral gear oil BS is a fully synthetic hypoid gear oil for truck and car rear axles. Specifications API GL-5 MAN 342 Type S1 Scania STO 1:0 ZF TE-ML 05A,12B,17B,19C,21B BMW (Non LS rear axles)

Aral gear oil SNS-AT 75W-90 is a fully synthetic manual transmission oil for commercial vehicles and is particularly suitable for use in Mercedes-Benz of the Actros, Axor and Atego series. Advantages Excellent viscosity - temperature behavior in a wide temperature range Very good wear protection, even under severe operating conditions Excellently good synchronous behavior, especially in MB commercial vehicle transmissions Particularly resistant to aging Specifications API GL-4 MB Approval 235.11

Transmax Dual with Smooth Drive TechnologyTM is a fully synthetic, smooth-running transmission oil that was specially developed for dual clutch transmissions from various car manufacturers such as Ford, Volvo, Chrysler, Dodge and Mitsubishi . Also recommended for use in the DQ 250 (DSG) dual clutch transmission according to VW part number G 052 182 for VW, Audi, Seat and Skoda. Transmax Dual offers original quality as it is provided for in the factory filling by the manufacturers listed. Specifications Audi / VW TL 52529 (G 052 529) Castrol Recommendations Recommended for use in: Ford WSS-M2C-936-A (Dual Clutch), Volvo, Chrysler (Europe), Mitsubishi, Peugeot using Getrag DCT, VW G 052 182; PSA Transmission Oil 9734 52; Dia Queen SSTF-1 VW, Seat, Skoda 6-speed Dual Clutch Transmission (DSG)

Lubrication of closed toothed gearing Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1 registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free

Lubrication of closed toothed gearin Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1-registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free

Specification Outlet pipe Anti-drip mouthpiece, automatically closing Special features For gear oil

In 2015 the product name was changed. The old product name was Castrol Optimol Paste MF. Silver-grey high-temperature paste with solid lubricants Description Castrol Molub-Alloy Paste MF (previous product name Castrol Optimol Paste MF) is particularly suitable for assembling screw connections in the high temperature range up to +1100 °C . Even under extreme pressures, it protects the surfaces from scoring, corrosion and seizing. In high-temperature areas, in wet conditions and in aggressive environmental influences, Castrol Molub-Alloy Paste MF seals the components and ensures good separation. Application Castrol Molub-Alloy Paste MF can be used for components at risk of corrosion, exposed to high temperatures and the environment , such as hot-screw connections, spark plug and lambda sensor threads.

In 2015 the product name was changed. The old product name was Castrol Molub-Alloy 936 SF Heavy. Open Gear Lubricant (Solvent-Free) Description Castrol Molub-Alloy OG 936 SF Heavy (previous product name Castrol Molub-Alloy 936 SF Heavy) is an open gear lubricant specifically developed for use in heavy-duty mining and industrial equipment . Castrol Molub-Alloy OG 936 SF Heavy is designed to provide maximum protection to gearboxes and rails of large draglines and buckets, while keeping potential environmental contamination to a minimum . The contained mixture of Molub-Alloy solid lubricants optimizes wear protection and load capacity. The selected solid lubricants work synergistically with chemical anti-wear (AW) and high-pressure additives (EP), reduce temperatures in the contact zone and offer good anti-seize protection under high loads and shock loads.

We develop and manufacture intelligent automation solutions for engines, gear-boxes and auxiliary systems in one-off or series production. Each solution is manufactured according to your wishes and requirements and can be easily extended with additional displays and operating panels for decentral visualisation and operation. The intuitive visualisation is based on the powerful CODESYS software suite (IEC 61131) and can be adapted to your corporate design. All components are suitable for applications in harsh environments and ensure maximum operational reliability. Typical field of application is control and monitoring of: Propulsion engine Reduction gear-box Hybrid gear-box Trolling clutch Genset Others (e. g. winches, separators, purifiers, fresh and waste water treatment)

Compact actuator for highly precise and backlashfree drives in industry and robotics Key functionalities: Very high absolute and repetitive accuracy Large hollow shaft Very compact and low weight design Outstanding life-long precision High dynamics Optimal design-in solution

Compact drive solution, with excellent torsional stiffness and overload resistance Key functionalities: Very high torsional stiffness Very compact form Very low backlash <1,5 arcmin High efficiency High overload factor Robust output bearing High reliability and availability Long lifetime

Drive unit with a very high power density and a broad range of applications Key functionalities: Large range of transmission ratios (1:3 - 1:512) Very high efficiency (97%) Low backlash possible High output torque Low noise level Lifetime lubrication Further options Flexible assembly (Flange or Housing)

Continuous gear honing is mainly used in the automotive industry as an alternative to generating grinding. This type of tool is also available as a set with DDG and integrated tip dressing roll. Diamond dressing gears produce the expected geometry precisely and fast and guarantee the demanded quality on the workpiece.