Framing - Import export

Measurement of steam Much unused energy is wasted through the exhaust air during drying processes without appropriate control. The Ecomat AML optimises the heating energy required by monitoring charging of the exhaust air with water steam and controls this factor through the fan speed or the exhaust air vent control.

Infrared pyrometer The Thermosense HP270 is used for non-contacting temperature measurement in driers and stenters and records the temperature of running product webs. The sensor is temperature-resistant up to 270 °C. It can therefore be mounted inside driers.

The IMS5420 is a high-performance white light interferometer for non-contact thickness measurement of monocrystalline silicon wafers. The controller has a broadband superluminescent diode (SLED) with a wavelength range of 1,100 nm. This enables the thickness measurement of undoped, doped and highly doped SI wafers with only one measuring system. The IMS5420 achieves a signal stability of less than 1 nm. The thickness can be measured from a distance of 24 mm.

The K and MK draw-wire sensors are specially designed for series applications with large numbers of pieces. The user benefits from an excellent price/performance ratio and compact sensor dimensions, therefore gaining new potential in design and cost optimization. As well as analog versions with potentiometer, current or voltage output, digital versions with incremental or absolute encoders are available.

Optimizes finishing The Orthopac VMC is a modular process control system for textile refinement. It optimises drying or fixing processes as well as the processes all about the stenter. The system measures, logs and controls critical process parameters over the entire working width like temperature, dwell time, residual moisture, exhaust air moisture, thread density, basis weight and more. This increases quality while saving resources and energy. The modular design of the system allows its flexible adaptation to all applications. Both, standard requirements and highly customized demands are thus met. The system can also be integrated into an Orthopac straightening system. It thereby combines the functionality of a weft straightener with that of a process control system in one compact device.

Melamine table top: - chipboard according to DIN 68765, melamine resin coated on both sides and 2 mm ABS edge - the table top is hygienic, it is not harmful to food, and is simple to clean High-quality T-frames SWING - tubular steel, Ø 25 mm - color: polyester powder-coated or polished high-gloss chrome-plating - snap-lock PRESS made of metal - plastic slide caps for safe standing - plastic staking buffer with added rubber which allows the tables to be stacked without slipping - no level compensation Selection options: - table top color - table top thickness - dimension - frame color We offer the following discounts: 10+ pieces 5% | 20+ pieces 8% 50+ pieces 10% | 100+ pieces 15% If you need more tables please send a request! For orders of folding tables over 2500 € excl. tax you receive a bonus table trolley! Benefits: - 5-year guarantee - Made in Germany

Table top flame retardant (B1): - Particle board according to DIN EN 312, melamine resin coated on both sides and 2 mm ABS edge - the table top is hygienic, it is not harmful to food, and is simple to clean High-quality T-frames SWING: - tubular steel, Ø 25 mm - color: polyester powder-coated or polished high-gloss chrome-plating - snap-lock PULL made of metal - plastic slide caps for safe standing - no level compensation - plastic staking buffer with added rubber which allows the tables to be stacked without slipping Selection options: - table top color - dimension - frame color We offer the following discounts: 10+ pieces 5% | 20+ pieces 8% 50+ pieces 10% | 100+ pieces 15% If you need more tables please send a request! For orders of folding tables over 2500 € excl. tax you receive a bonus table trolley! Benefits: - Made in Germany

Table top flame retardant (B1): - Particle board according to DIN EN 312, melamine resin coated on both sides and 2 mm ABS edge - the table top is hygienic, it is not harmful to food, and is simple to clean High-quality L-frames LINA: - tubular steel, Ø 25 mm - color: polyester powder-coated - snap-lock PRESS made of metal - plastic glides for safe standing - plastic staking buffer with added rubber which allows the tables to be stacked without slipping Selection options: - table top color - dimension - frame color We offer the following discounts: 10+ pieces 5% | 20+ pieces 8% 50+ pieces 10% | 100+ pieces 15% If you need more tables please send a request! For orders of folding tables over 2500 € excl. tax you receive a bonus table trolley! Benefits: - Made in Germany

✓ Ultra wide input range 6...36VDC ✓ Selectable output voltage +12V, +19V or +24V ✓ Very compact design 132mm x 56mm x 17mm ✓ Full performance in the extended temperature range of -20°...+60°C ✓ Very high efficiency up to 98% ✓ More than 10 years capacitor lifetime ✓ Optional output voltage compensation via sense lines ✓ Optional Remote On/Off ✓ Incl. thermal pad, jumper and distance bolts ✓ Made in Germany With 98% efficiency and 300W output power the powerful open frame DC/DC converter offers an ultra-wide 6-36 V input as well as three selectable output voltages 12V / 19V / 24 V, so that almost any corresponding single-voltage motherboard or computer system can be supplied. The very compact DC converter “Made in Germany” delivers fanless full power in the extended temperature range of -20°…+60°C and up to an operating altitude of 5000m.

Alu Connection Angle for aluminum profiles 40 & 40x80 To connect two aluminum profiles quickly at right angles, direct inserting into the profile slot thanks to correct positioning of the pre-assembled magnet rhombus screws and countersunk nuts; the connection angle can be closed with the cover cap Color/Material: Angle: Aluminum die-cast; alu color lacquered Cover cap: Plastic PA, glass fiber reinforced; Black or gray Countersunk nuts: Zinc plated Magnet rhombus screws: Steel Other surfaces, other colors on request

We happily took the increased demand for cost-effective square-cut glazing frames as a motivation to expand our standard range. As a result, we produce glazing frames as both triangular and quadrilateral forms. You can choose between rounded mitre corners (radius 5 mm) or round corners (radius on the frame 44.5 mm). The size and shape of the viewing window cannot be changed. The glazing frames are produced exclusively in stainless steel with the familiar A, B and C mounting styles. Of course, we are continuing to produce glazing frames in special sizes and shapes. These can be produced with round corners, as well as mitre-cut corners.

Mosaic picture in brass frame. Mainly Murano glass which is backed with silver and thus results in a 3rd dimension. Dimensions:31,49 x31,49 x 0,787 inches

Aero Cell HTVII filters are new generation high efficiency minipleat high temperature fine filters available in a wide range of efficiencies from M6 toF9. Aero Cell HTVII filters are designed to deal with hot air filtration in installations where the highest degree of air cleaniless is required. Frames aremade up or either Galvanized Steel or Stainless Steel. The pleats are separated by glass paper and completely silicon free construction.

Aero Panel GPF model features Panel filters in Glass fiber media. GPF type filters are Pad and Frame design wherein the filter frame has apermanent heavy duty grid on air exit side and with a removable mesh arrangement in the air entry. This ensures replacing the padsonly when required and hence is an economical solution.