Results for
ERDWICH ZERKLEINERUNGS-SYSTEME GMBH
Germany
ERDWICH hammer mills are the answer to the challenge of selectively shredding hard and brittle materials. Then again, ERDWICH hammer mills also take the pelletisation of rubbery materials – as preparation for downstream separation systems – in their stride. A tough customer? Just so. ERDWICH hammer mills are especially suited to metal, electrical and electronic scrap or swarf from steel or aluminium – and many other materials besides. Simple adjustability during operation also makes short work of the pelletisation of non-ferrous metals. The final fragment size is variable and can be changed during operation. That’s also a great example of the product’s flexibility in catering to a wide range of applications. For the selective challenges in life. ERDWICH hammer mills.
Request for a quoteMICRO-EPSILON
Germany
Iron and steel represent a fundamental pillar in industrial production. Precision in the production process of metal plates, sheets and coils is crucial to the efficient use of scarce resources and economic success. As a manufacturer of measuring systems for the steel industry based on optical sensors, Micro-Epsilon offers a comprehensive portfolio without radioactivity that ensures More Precision in all applications regardless of complexity and material properties. With optimized sensor technology tailored to the respective application, innovative mechanical design, as well as cooling and protective devices, the systems meet the challenges of the processes. The high-performance signal processing and analysis software makes the systems the leading optical measuring systems on the market which detect the following parameters
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals.
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
One of our specialties are specialized products for the metalworking industry. In this area, we offer a large range of non-water-miscible and water-miscible products and emulsions that are suitable for processing aluminum, non-ferrous metals, steel and stainless steel. We also have a comprehensive range of customer-specific solutions for manufacturing processes such as forming, deep drawing, punching, fine blanking, machining, deep drilling, sawing and eroding. Thanks to our experienced team of advisors and advice at eye level, we can find the right product for every application.
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Water-miscible premium cooling lubricant Description Castrol Alusol ABF 47 is a boron, amine, formaldehyde releaser and chlorine-free water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and reduces machining costs. Castrol Alusol ABF 47 is suitable for both central systems and individual systems. Application Castrol Alusol ABF 47 was specially developed for processing aluminum alloys. The product can also be used to process low-alloy steels and non-ferrous metals .
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist OKS 390 is suitable for use with the OKS Airspray system Also available as spray version OKS 391Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered Also available as spray version OKS 3601
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Water-miscible premium cooling lubricant Description Castrol Alusol ABF 47 is a boron, amine, formaldehyde releaser and chlorine-free water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and reduces machining costs. Castrol Alusol ABF 47 is suitable for both central systems and individual systems. Application Castrol Alusol ABF 47 was specially developed for processing aluminum alloys. The product can also be used to process low-alloy steels and non-ferrous metals .
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Replacement product ARAL SAROL 474 EP Semi-synthetic water-miscible premium cooling lubricant Description Castrol Alusol™ ABF 10 is a boron, amine, formaldehyde releaser and chlorine-free, semi-synthetic water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and bioresistance and reduces machining costs. Castrol Alusol ABF 10 is suitable for both central systems and individual systems. Application Castrol Alusol ABF 10 was specially developed for processing aluminum alloys. The product can also be used to process low-alloy steels and non-ferrous metals .
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Replacement product ARAL SAROL 474 EP Semi-synthetic water-miscible premium cooling lubricant Description Castrol Alusol™ ABF 10 is a boron, amine, formaldehyde releaser and chlorine-free, semi-synthetic water-miscible high-performance cooling lubricant. It contains a unique additive package that improves machine performance and surface quality, ensures excellent stability and bioresistance and reduces machining costs. Castrol Alusol ABF 10 is suitable for both central systems and individual systems. Application Castrol Alusol ABF 10 was specially developed for processing aluminum alloys. The product can also be used to process low-alloy steels and non-ferrous metals .
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Touching-up damaged points on galvanised surfaces, for example after welding, drilling or cutting processes Priming of ferrous metals when zinc galvanising cannot be carried out. For example, in vehicle and ship repairs, in steel building construction, civil engineering and bridge building, in tank and overhead line construction, on grids, fence and traffic signal posts, exhaust systems, drain gutters Also suitable for spot welding thanks to the good electrical conductivity Advantages and benefits Highly effective due to active, cathodic corrosion protection Versatile use as durable corrosion protection at thermally stressed metal parts Highly economical due to low consumption and self-cleaning spray valve Supplements galvanising and forms a rough adhesive surface for subsequent painting
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501 NSF H2 registered To achieve optimal adhesion remove soiling as well as other lubricants from the thread and sliding surfaces. Use a brush, spatula or similar to apply sufficient OKS 250
Request for a quoteLEONI DRAHT GMBH
Germany
Strands with a concentric structure made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 630 mm². The individual wires are subject to an exact positioning around a core wire, which ensures an all-out uniform structure. Concentric strands are particularly appropriate for thin-gauge coating with high-grade isolation materials (extrusions). 7-end strands are especially suited for data cables with high frequencies of transmission. The technical qualities of a concentric strand can be extremely well and accurately customized by combining several different alloy wires.
Request for a quoteLEONI DRAHT GMBH
Germany
Strands with a semi-concentric structure made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.03 mm² to 16 mm². The individual wires are subject to an exact positioning, yet without an additional core wire, which ensures an all-out uniform structure. Concentric strands are particularly appropriate for thin-gauge coating with high-grade isolation materials (extrusions). The technical qualities of a semi-concentric strand can be extremely well and accurately customized by combining several different alloy wires.
Request for a quoteLEONI DRAHT GMBH
Germany
Semi-concentric or concentric strands with very short lay lengths and an extraordinarily smooth surface made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 16 mm². LEONI has had its manufacturing process specifically dedicated to this type of product patented. LEONI smooth bunches boast an exceptionally compact and precise round structure and have a very good Flex life. They are particularly suitable for moving applications and for thin-gauge coating with high-grade isolation materials benefitting from a long flex life as well as weight and space efficiency.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LEONI DRAHT GMBH
Germany
Compact braided square and rectangular copper flexibles made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys (upon request) in bare, tin-plated or silver-plated. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.20 mm. Cross-section ranging from 0.47 mm² to 50 mm² (further dimensions upon request). Square copper braids require less space in comparison to round copper braids with the same cross-section. There is a precise positioning owing to square or rectangular shape, which allows for failure-free and fully automated downstream manufacture. Squre or rectangular copper braids are characterised by very good Flex life, being absolute free from twist, a compact cutting surface, a very high degree of dimensional accuracy and a very long lifetime. Compact braided square and rectangular copper flexibles are particularly suitable for applications in carbon brushes industry, connection technology, switches and aviation industry.
Request for a quoteLEONI DRAHT GMBH
Germany
High-flexible copper-based ropes, enclosed by an additional braid, made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys (upon request) in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.10 mm. Cross-section ranging from 0.35 mm² to 120 mm² (bigger cross-sections upon request). Our ropes with overall braids are characterised by their good flexibility and their excellent mechanical strength. The overall braid has a vibration-reducing function and prevents unrevelling of the rope. Ropes with overall braids are mainly suitable for automotive, industrial applications and for connectors.
Request for a quoteLEONI DRAHT GMBH
Germany
High-flexible round strands and ropes made from Cu-ETP1, Cu-OF1, aluminium and LEONI Histral® alloys (upon request) in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 630 mm² (bigger cross-sections upon request). High-flexible round strands and ropes are mainly suitable for earthing straps, connectors, conductors for low-voltage lighting and for welding technology.
Request for a quoteLEONI DRAHT GMBH
Germany
Fabric tapes, braided into a tube and then flat-rolled (if needed). Made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.40 mm. Cross-section ranging from 0.09 mm² to 400 mm². Our flat-rolled fabric tapes are characterised by a very high degree of dimensional accuracy. Suitable for earthing straps, connectors or electrotechnical components.
Request for a quoteLEONI DRAHT GMBH
Germany
Tubular-knitted copper tape made from Cu-ETP1 and Cu-OF1 in tin-plated, bare upon request, soft annealed. Single wire diameter Ø 0.10 mm, processed in 1 x 0.10 mm or 2 x 0.10 mm. Width 25 mm. For electrical shielding.
Request for a quoteLEONI DRAHT GMBH
Germany
Contured fabric tapes, braided into a tube and then flat-rolled. Made from Cu-ETP1 and Cu-OF1, LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated or silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.40 mm. Cross-section ranging from 25 mm² to 120 mm². Our flat-rolled fabric tapes are characterised by straight rectangular edges with a very high degree of dimensional accuracy and very close tolerances. There is an adjustable degree of compaction, with cross-section remaining unchanged, as well as an easy combination of different cross-sections laid on top of each other (modular system). Contured, braided copper tapes have an improved weldability in automated production processes for manufacturing of earthing straps, connectors or electrotechnical components.
Request for a quoteLEONI DRAHT GMBH
Germany
Shielding braids consist of bobbin wires, located parallel, which have been braided into a tube. Manufactured from Cu-ETP1, Cu-OF1, LEONI-Histral®-alloys (upon request), aluminium and stainless steel, with coating in bare, tin-plated, nickel-plated or silver-plated, hard or soft annealed. Sinlge-wire diameter ranging from Ø 0.10 mm to Ø 0.40 mm. Cross-section ranging from 0.25 mm² bis 400 mm². Tubular shielding braid is smoothly expandable and has a very good shielding effect. The couverage can be determined precisely by changing the braiding angle. Suitable for electrical and mechanical shielding of wires, cables, cable bundles and cable harnesses.
Request for a quoteLEONI DRAHT GMBH
Germany
Flat-knitted copper tape made from Cu-ETP1 and Cu-OF1 in tin-plated, bare upon request, soft annealed. Single wire diameter Ø 0.10 mm, processed in three-fold and eight-fold. Width of flat-knitted copper from 20 mm to 100 mm. For electrical shielding.
Request for a quoteTRIBO-CHEMIE GMBH
Germany
Forging lubricant for aluminium and non-ferrous metal Temperature Range 160 °C to 400 °C Properties and Advantages • promotes the metal flow during forming process resulting in optimal form filling and accurate, precise parts • perfect release • much cleaner forgings, hardly any residues • reduced cleaning effort • high surface quality • improvement of tool die life due to adhesion of protective graphites • various modifications available e. g. Graphitex® CR 25-9/14
Request for a quoteTRIBO-CHEMIE GMBH
Germany
Graphite-free lubricant for the forging of aluminium Temperature Range 130 °C to 380 °C Properties and Advantages • improved cleanliness of work environment (graphite-free) • reduced wear on tool surface due to the forming of an effective release film • good release of forgings • formation of a pressure resistant lubricating film • forgings can be painted and powder coated, downstream processes are trouble-free • alternative to graphite containing products
Request for a quoteResults for
Ferrous metal - Import exportNumber of results
35 ProductsCompany type