Data transfer - Import export

The sensor technology of the DCT 533 is the same as those of the proven pressure transmitter DMP 331 / DMP 333, whereby the DCT 533 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 533 to different conditions on-site. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar — accuracy: 0,35 % (opt. 0,25%) FSO — IO-Link according to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — perfect thermal behaviour — excellent long term stability Optional Features: — pressure port G 1/2" flush from 100 mbar — pressure sensor welded — customer specific versions

The DCT 533P is suitable for food / beverage and pharmaceutical industry as well as, for applications where a totally flush pressure port is required. The special design prevents condensation inside the pressure transmitter and thus a failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Properties can be read and qualified via IO-Link, which helps the user to assess the state of system or process. Features: — nom. pressure: 0 ... 100 mbar up to 0 ... 40 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V 1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygenic version — CIP / SIP cleaning up to 150 °C — ingress protection Ip 67 / IP 69 — diaphragm with low surface roughness Optional Features: — cooling element for media temp. up to 300 °C — different process connections

The electronic pressure switch DS 350 is interesting for all users in plant and machine engineering, due to the integrated IO-Link interface to exchange process data, diagnostic reports and status messages with a superordinate control level, as standard. In addition, further information can be retrieved that allow conclusions to the application process. Especially in mechanical engineering, great demand for flexible operating conditions have to be satisfied. Features — Nominal pressure from 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.5% / 0.35 % (opt. 0.25 %) FSO — IO-Link according to specification V 1.1 — smart sensor profile — data transfer 38.4 kBaud — indication of measured values on a 4-digit LED display — rotatable and configurable display module — parameter settings via IO-Link or menu (VDMA-conform) — additional information via IO-Link accessible Optional features — different mechanical connections

The pressure transmitter DCT 553P is used in the food and pharmaceutical industries or in applications where a dead space-free process connection is required. A capacitive ceramic pressure sensor developed in-house is used as the basic sensor, which is characterized by a high overload and excellent surface quality. The special design prevents the formation of condensation inside the pressure transmitter and thus failure in applications with large temperature changes. The integrated, standardised IO-Link interface increases productivity and supports the operator in service and maintenance. Features: — nominal pressure: 0 ... 40 mbar up to 0 ... 20 bar — accuracy: 0.35% (opt. 0.25%) FSO — IO-Link acc. to specification V1.1 — Data transfer 38.4 kBaud — Smart sensor profile — hygienic version — protection IP 67/ IP 69 — high overpressure resistance — diaphragm ceramics Al2O3 (99.9 %) Optional: — different process connections

DCT 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data will transfer in binary form. Due to the usage of high quality materials and components, DCT 531 is suitable for almost every industrial application, if medium is compatible with stainless steel 316L. The modular concept of the pressure transmitter allows customized electrical or mechanical connections, so it is easy to adapt the DCT 531 to different conditions on-site. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar — accuracy: 0.25% FSO — perfect thermal behaviour — excellent long term stability Optional Features: — pressure port G 1/2" flush from 100 mbar — pressure sensor welded — customer specific versions

The stainless steel probe DCL 551 with RS485 in-terface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data are transferred in binary form. DCL 551 has been designed for hydrostatic level measurement in sewage as well as for viscous and pasty media. Basic element is a robust and high overpressure capable capacitive ceramic sensor. Features — Nominal pressure: from 0 ... 40 cmH2O up to 0 ... 200 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — output signal: RS485 with Modbus RTU protocol — diameter 39.5 mm — excellent long term stability — especially for sewage, viscous and pasty media Optional features: — diaphragm ceramics Al2O3 99,9%

The DCL 571 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data will transfer in binary form. The probe was developed for level measurement in waste water, sludge or water courses. The mechanical robustness of the flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service. The outside-diameter is only 22 mm for easy installation and back fitting in 1″ tubes or in cramped fitting conditions Features — Nominal pressure from 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0.35% (opt. 0.35 %) FSO — output signal: RS485 with Modbus RTU protocol — diameter 22 mm — highly appropriated for sewage water Optional features — drinking water certificate according to DVGW and KTW

The stainless steel probe DCL 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data are transferred in binary form. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability. Features — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0.25 % FSO — output signal: RS485 with Modbus RTU protocol — diameter diameter 26.5 mm — small thermal effect small thermal effect — high accuracy excellent accuracy — reset function Optional Features — drinking water certificate according to DVGW and KTW — different kinds of cables — different kinds of seal materials

Training for high standards High standards are set for medical training therapy (MTT) in rehabilitation in particular. For this reason, we took advantage of the experience of our production partner ERGO-FIT and developed the kardiomed 700 devices, a system that is exemplary in user friendliness. Training management and system integration All kardiomed 700 devices have a high-definition touchscreen. They are to be operated intuitively and the good legibility of the displays also facilitates use by your older or physically limited patients. Modern technology Training management and documentation are just as important for training success as for the efficient processes in your establishment. In our kardiomed 700 devices,the proxomed chip card system is integrated in series. The reliable data transfer both to the central data interface proxOS and to our proxotrain software is thus ensured. The system provides for documentation that is accurate in every detail and allows you optimum...

The "Metzner RPA 10-SL" is a powerful and flexible press automation system for handling indexable inserts and small ceramic parts for medium to large batch sizes. It has an integrated magazine system for up to ten sintering inserts. Empty sintering inserts are automatically removed from the magazine, loaded and then returned as required. In this way, the powder press automation works independently over a longer period of time without loading and unloading processes leading to a press stop. With its integrated 4-axis SCARA robot, the machine achieves very high system speeds of up to 30 stroke/min. The "RPA 10-SL" is operated conveniently via the integrated control or via the mobile operator terminal. At the push of a button, loaded sintering plates are removed and new ones received. Defined operating data are transferred to the press control via an interface.

NORISTAR 4 - The flexible remote control system for all propulsion drives The NORISTAR 4 is our powerful remote control system (RCS) for all types of ship, whether tugboats, cargo ships, passenger ships or super yachts. It is based on our NORISYS 4 open automation platform and is suitable for all propulsion drives. The system can be configured for multiple control consoles and offers many useful functions, such as load distribution, preprogrammed control programs, "electric shaft" function, start/stop logic, DP and joystick function. Configuration and monitoring are performed in a simple and user-friendly way via an integrated touchscreen display. Optional web access makes service easier and facilitates remote maintenance and the transfer of data to fleet management.

The GAGE-CHEK 2000 evaluation unit is particularly well suited for positioning tasks on measuring devices and positioning equipment, and for the retrofitting of measuring machines for the capture and transfer of data to a PC. Design Thanks to its rugged industrial design, the GAGE-CHEK 2000 is superbly suited for applications in measuring rooms as well as in harsh production environments. Its slim aluminum housing with integrated power adapter and fanless passive cooling system is exceptionally sturdy and resilient. The unit’s straightforward touchscreen, made of specially hardened glass, supports multitouch gesture control and permits operation with gloves.

Your tool for nextgeneration machinery alignment ROTALIGN touch is the first laser shaft alignment system on the market to combine high precision onsite measuring tasks and cloud connectivity for worldwide data access and transfer. It features the unique sensALIGN 7 laser and sensor heads offering a full range of everyday alignment routines up to expert degree alignment jobs – such as cardan shaft alignment or coupling alignment. The singlelaser technology enables unrivaled precision, even in harshest conditions and on highly demanding jobs. ROTALIGN touch was designed by some of the world’s leading alignment experts to solve problems in the easiest way possible. The intuitively guided user interface can be operated by almost anyone – users just need to follow the three steps for any laser shaft alignment procedure dimension, measure, and result.

Stake Out Aids RS95 and RS96 Stake out aids RS95 and RS96 were developed specifically for setting out work on the batter boards and on the floor slab. Exact measuring of the survey point on the floor slab often causes major problems particularly in the “final phase” with the last 5-10 cm. The work is very time-consuming due to the continual side to side, backwards and forwards with the prism pole and the prism pole always has to be exactly plumb. Setting out aid RS95 or foldable setting out aid RS96 is placed on the ground and the assistant can use the measuring scales to reproduce and transfer the surveyor’s directions quickly and precisely. Makes surveying the axes on the batter boards easier For allowances on the floor slab – the last 5-10 cm especially can be measured quickly and precisely The surveyor’s dimensional data can be transferred accurately to the floor slab There is no need for precise plumbing of the prism pole Orientation scale for left and right - the number 10 corr