Couple - Import export

Our corrugated tubes and the respective accessories (couplings or sleeves, O-rings, manifolds and hose mounts) are made to customer's specification. They are ideally suited for longterm use in the transport of liquids, also at very high temperatures, or chemical substances, they are crush resistant and have been 100% leak tightness tested. Available materials/maximum operating temperature: PP -40°C - + 105°C PE -40°C - + 70°C Application: Dishwashers, washing machines, dryers, refrigerators or freezers, coffee makers, whirlpools, electric tooth brushes etc.

Our fittings high quality is based on: – Patented design PPSU fitting, with three EPDM O-rings and inox sleeves. – Compatible with multilayer pipes. – Compatible with several jaw profiles, such as U, H, TH and RFz for fittings from 16 mm to 32 mm – Jaw profiles U, TH for 40 and 50 mm.

Hose couplings DIN 3489 With double lock, distance between lugs 42 mm, oil-resistant rubber gasket material: ductile graphite iron, galvanized working pressure: 10 bar Category Compressed-air technology / Claw couplings and accessories / Couplings with hose connection / Hose couplings Product number supplier 330013242

Hose couplings DIN 3489 With double lock, distance between lugs 42 mm, oil-resistant rubber gasket material: ductile graphite iron, galvanized working pressure: 10 bar Category Compressed-air technology / Claw couplings and accessories / Couplings with hose connection / Hose couplings Product number supplier 330013242

Aral gear oil SNS-AT 75W-90 is a fully synthetic manual transmission oil for commercial vehicles and is particularly suitable for use in Mercedes-Benz of the Actros, Axor and Atego series. Advantages Excellent viscosity - temperature behavior in a wide temperature range Very good wear protection, even under severe operating conditions Excellently good synchronous behavior, especially in MB commercial vehicle transmissions Particularly resistant to aging Specifications API GL-4 MB Approval 235.11

cable coupling Category Electrical equippment for vehicles / Cable connections / Cable connections Product number supplier 777905

cable coupling Category Electrical equippment for vehicles / Cable connections / Cable connections Product number supplier 777905

Category Compressed-air technology / Claw couplings and accessories / Couplings with hose connection / Hose couplings with safety collar / Brass Product number supplier 330111342

Category Compressed-air technology / Compressed-air couplings and accessories / Plug / With inner thread Product number supplier 301039

Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding hydraulic Product number supplier 332014221

Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding hydraulic Product number supplier 332014221

Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding normal Product number supplier 332014211

Female couplings with hose stem With one handle material: modular graphite cast iron/steel, galvanized Category Low pressure hoses and fittings / Mortar couplings and accessories / Sockets / With hose sleeve 1-lever / Binding normal Product number supplier 332014211

Male couplings from brass for water Distance between lugs 40 mm, gasket from Perbunan material: forged brass MS 58 Category Low pressure hoses and fittings / Claw couplings and accessories / Hose couplings with external thread / Brass Product number supplier 330163940

Hose couplings from brass for water Distance between lugs 40 mm, gasket from Perbunan material: forged brass MS 58 Category Low pressure hoses and fittings / Claw couplings and accessories / Couplings with hose connection / Hose couplings / Brass Product number supplier 330153840

Hose couplings from brass for water Distance between lugs 40 mm, gasket from Perbunan material: forged brass MS 58 Category Low pressure hoses and fittings / Claw couplings and accessories / Couplings with hose connection / Hose couplings / Brass Product number supplier 330153840

In rotary encoders with integral bearing and stator coupling, the graduated disk of the encoder is connected directly to the shaft to be measured. The scanning unit is guided on the shaft via ball bearings, supported by the stator coupling. During angular acceleration of the shaft, the stator coupling must absorb only that torque resulting from friction in the bearing, thereby minimizing both static and dynamic measuring error. Moreover, the coupling mounted on the stator compensates axial motion of the measured shaft. Other benefits of the stator coupling are: Simple mounting Short overall length High natural frequency of coupling Hollow-through shaft possible

iwis not only manufactures sprockets and plate wheels according to ISO 606 but also customized versions built in accordance with your specifications, drawings or samples. Sprockets Our standard range of sprockets includes sprockets according to ISO 606 from size 05B-1 to 32B-3. Sprockets with taper-lock bushes Taperlock-bushes for fixing hubs precisely and axially centered on a shaft. Plate wheels Standard plate wheels for the complete iwis product program: sizes 05B-1 to 32B-3. Drive sprockets and idler wheels For the FLEXON Flat Top Chain program. Our drive components program consists of torque limiters, Couplings, Tensioners, Chain tools and etc.

• with radial clamping hub on both sides • easy to install - plug in design • compensation of shaft misalignments - oscillation dampening • Torque range: 0,5 - 2.000 Nm • Shaft diameter: D1= 4 - 90 mm / D2= 5 - 100 mm

• stainless steel version • easy to assemble clamping hub • plug-in, backlash-free and vibration dampening • torque range: 8 - 500 Nm • shaft diameter: 8 - 55 mm

• standard version with radial clamping hub • plug in - oscillation dampening • Torque range: 0,7 - 12,5 Nm • Shaft diameter: 3 - 14mm • Temperature range -20 to +70°C

• variable lengths from 55 to 260 mm • without additional intermediate storage • backlash-free, precise torque transmission • special symmetrical clamping hub with high balancing quality and for high operating speeds

• High-speed version for the highest operating speeds • Rotationally symmetrical clamping hub for optimum balancing quality

• conical hub on both sides • straight bellow - long design • Torque range: 25 - 2.500 Nm • Shaft diameter: 10 - 102 mm • low storing forces – high torsional stiffness

• simple installation with optional radial EASY-clamping hub on both sides • steel hub - welded design - temperatures up to 300°C • 2-, 4- or 6-corrugation bellows - short design - high torsional stiffness • Torque range: 5 - 20Nm • Shaft diameter: 6 - 20 mm » KG-VA = stainless steel optional

• low-cost version with set screws • plug in - radial shaft displacement up to 3 mm • Torque range: 1 - 15 Nm • Shaft diameter: 3 - 19 mm • Temperature range -20 to +100°C

• low-cost version with set-screw • plug in - oscillation dampening • Torque range: 0,7 - 12,5 Nm • Shaft diameter: 3 - 14 mm • Temperature range -20 to +70°C

• simple installation due to split-hub design • can be combined with EKM - hub or ESM-A - hub • mountable without disassembly of motor • Torque range: 15 - 2.000 Nm • Shaft diameter: 8 - 100 mm