Convertibles - Import export

The DC-voltage converters developed for the electronic components in the motor car are characterised by their ease of installation in every vehicle. The high degree of stability, the compact design, sustained short-circuit resistance as well as the high level of operating safety are the quality hallmarks of this series. The areas of application span the mobile employment of 12-V-consumers in vehicles with a 24-V-onboard network. The devices are particularly suitable for operating car radios, stereo units, radios, cooler units, car telephones, computers, 12-V-trailer lighting etc. The voltage converter converts an input direct voltage into an output direct voltage. The input voltage must be greater than the output voltage. No base load is required at the output end. A 26 kHz PWM switching controller is used for this purpose. Input and output are not isolated. The common earth is connected with the voltage converter housing.

✓ Ultra wide input range 6...36VDC ✓ Selectable output voltage +12V, +19V or +24V ✓ Very compact design 132mm x 56mm x 17mm ✓ Full performance in the extended temperature range of -20°...+60°C ✓ Very high efficiency up to 98% ✓ More than 10 years capacitor lifetime ✓ Optional output voltage compensation via sense lines ✓ Optional Remote On/Off ✓ Incl. thermal pad, jumper and distance bolts ✓ Made in Germany With 98% efficiency and 300W output power the powerful open frame DC/DC converter offers an ultra-wide 6-36 V input as well as three selectable output voltages 12V / 19V / 24 V, so that almost any corresponding single-voltage motherboard or computer system can be supplied. The very compact DC converter “Made in Germany” delivers fanless full power in the extended temperature range of -20°…+60°C and up to an operating altitude of 5000m.

i/p converter for the electrical control of pneumatic positioners. Suitable for field and switch cabinet assembly. Suitable for remote control of valves in hazardous areas. Also in Ex version II 2 G EEx ib IIC T6.

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for top-web applications on PE and PP » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » High transparency » Asymmetrical layer structure » Equipped with Anti-Fog » Modified sealing-layer for firm-sealing on PE and peel-sealing on PP

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for side-sealed pouches without aluminium/metallization » Lamination of multilayer films for tubular pouches without aluminium/metallization » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » Various tintings possible » Symmetrical layer structure » Sealing layer optional equipped with Peel

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for hot filling applications » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » High transparency » Various tintings possible » Asymmetrical layer structure » Modified sealing-layer especially for hot filling applications

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for tubular pouch applications » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » Very good Hot-Tack-behaviour » High transparency » Asymmetrical layer structure » Enhanced sealing-layer especially for tubular pouch applications

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for thermoforming » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » High transparency » Symmetrical layer structure » Enhanced EVOH-barrier-layer especially for thermoforming applications » Sealing layer optional equipped with Peel

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for top-web applications » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » High transparency » Symmetrical layer structure » Sealing layer optional equipped with Peel » Optional equipped with Anti-Fog » With UV-protection upon reques

What you can expect from APROVIS SCR catalytic converters: - SCR housing with insulation - Optimised design of the catalytic converter honeycombs - Injection section with static mixers - Daily service tank - Dosing station for exact dosing of the reducing agent - Continuous measurement of nitrogen oxides (NOx) - Controlled urea injection at measured NOx values - High conversion rate and long service life

What you can expect from APROVIS oxidation and three-way catalytic converters: - Individual design for each specific application - Also special production for special applications - Short delivery times - Compliance with the limits over the warranty period - Use of soldered metal supports to withstand high thermal and mechanical loads - No telescoping of the catalytic converter elements

The revolutionary TOPO by TOPTICA stands alone as the only fully automated, continuous-wave, singly-resonant optical parametric oscillator laser source on the market. High resolution spectroscopy across 1.45 – 4.0 µm (2500 – 6900 cm-1) has never been easier. TOPTICA’s unique optical design enables broadly tunable laser light. No module or mirror exchange is necessary. Additionally, the all-digital control electronics enable hands-free coarse tuning, and frequency locking. A wide mode-hop-free tuning range up to 300 GHz (10 cm-1) enables visibility of full spectroscopic signatures. Simultaneously, the TOPO maintains a narrow linewidth (2 MHz, 1·10-5 cm-1) giving a solution that reveals narrow atomic and molecular features.

The TA-FHG pro is a tunable, diode-based laser source in the deep UV spectral range. The system consists of an external cavity diode laser, a high power semiconductor amplifier (TA), and two cascaded second harmonic generation stages (SHG pro). Alternatively, it can be equipped with a fiber amplifier (FA) or Raman fiber amplifier (RFA). It provides tunable laser radiation for spectroscopy, laser cooling, holography and interferometry.

The TA-SHG pro system, part of the UV / RGB solutions, comprises a tunable diode laser, a high power semiconductor (TA) and an integrated frequency doubling stage (SHG pro). Alternatively, it is available with a fiber (FA) or Raman fiber (RFA) amplifier. The SHG stage is a folded ring cavity in bow-tie configuration with excellent thermal and mechanical stability. The system now includes fully-automated push-button coupling optimization into the TA chip, the SHG cavity and the output fiber, as well as output power stabilization. It provides tunable laser radiation for spectroscopy, laser cooling, optical data storage, holography and interferometry.

The SHG pro is the device of choice if existing lasers are to be frequency doubled. Designed in TOPTICA’s pro technology, it unites highly stable performance and convenient operation. Mirror and crystal holders can be adjusted without opening the resonator cover. A wide range of non-linear crystals covers SHG wavelengths from 190 to 800 nm. TOPTICA offers competent support for adapting the unit to customer requirements.

The grating stabilized diode laser SHG pro is a medium power solution, for applications such as spectroscopy of atoms, ions and molecules, laser cooling and interferometry. Designed in TOPTICA’s proprietary pro technology, it combines best performance and ease-of-use – at moderate initial and operating costs. The system now includes fully-automated push-button coupling optimization into the SHG cavity and the output fiber. The package comprises a solid laser head and a DLC pro control rack. It can be upgraded to a TA-SHG pro, if an appropriate amplifier source is available.