Results for
BEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
The capacitive level sensor NR 160 is designed to monitor liquids and powders with high relative dielectric constant εr 35 … 85. The functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The switch point is adjustable by means of a teach-in momentary switch.
Request for a quoteBEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
The NR 260 is a capacitive level sensor for monitoring liquids. It is designed for use in fuel cells. The material is also suited to applications in the chemical industry for monitoring aggressive media. The functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The Main Features of the NR 260 are high medium resistance of materials enamel, Hastelloy C4 2.4610 and stainless steel 1.4571 high protection class IP67 with connector short-circuit proof switching output 1 A, high side or low side switch MAX sensor or MIN sensor switch point factory pre-set for the following media: de-ionised water (conductivity < 4,2 μS/cm): 28 mm ± 2 mm tap water (conductivity ≈ 300 μS/cm): 22 mm ± 2 mm other media upon request; switch point adjustment via programmable interface on request
Request for a quoteBEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
The TLS 100 tube sensor works on the capacitive measuring principle and detects the presence of a liquid in a plastic tube. These plastic tubes may also be mounted as a by-pass on a compensator in order to signal the required medium level in containers. The sensor is simply snapped onto the tube at the ideal level of the medium and provides versatile usage for a wide range of applications in medical equipment, the food stuffs industry etc. The sensor can additionally be fixed by means of the two mounting lugs to ensure a tight fit on the tube. Caution The switch point is factory pre-set so as to lie exactly between the two mounting clips. When readjusting the switch point, please observe that it again lies between the two clips. A mass surface in the proximity (< 10 mm) may influence the switch point and may necessitate a readjustment.
Request for a quoteBEDIA MOTORENTECHNIK GMBH & CO. KG
Germany
The capacitive level sensor BEDIA NR 150 is suitable for liquids with low relative dielectric constant εr 1,8 … 6 (ref. εr 2,1). It has a MIN/MAX selector switch and the functions for MIN or MAX monitoring as well as other properties (output signal LSS or HSS, response delay etc.) are factory pre-set. The switch point is adjustable by means of a teach-in momentary switch.
Request for a quoteLEONI DRAHT GMBH
Germany
Compact braided round copper flexibles made from Cu-ETP1 and Cu-OF1, LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated or silver-plated, in hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.10 mm. Cross-section ranging from 0.047 mm² to 25 mm² (bigger cross-sections upon request). Round copper braids are characterised by a very high degree of dimensional accuracy and a very high Flex life. They are absolute free from twist and support an automatic further processing. Compact braided round copper flexibles are particularly suitable for carbon brushes industry, connection technology, switches or aviation industry.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LEONI DRAHT GMBH
Germany
Fabric tapes, braided into a tube and then flat-rolled (if needed). Made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.40 mm. Cross-section ranging from 0.09 mm² to 400 mm². Our flat-rolled fabric tapes are characterised by a very high degree of dimensional accuracy. Suitable for earthing straps, connectors or electrotechnical components.
Request for a quoteLEONI DRAHT GMBH
Germany
Contured fabric tapes, braided into a tube and then flat-rolled. Made from Cu-ETP1 and Cu-OF1, LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated or silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.40 mm. Cross-section ranging from 25 mm² to 120 mm². Our flat-rolled fabric tapes are characterised by straight rectangular edges with a very high degree of dimensional accuracy and very close tolerances. There is an adjustable degree of compaction, with cross-section remaining unchanged, as well as an easy combination of different cross-sections laid on top of each other (modular system). Contured, braided copper tapes have an improved weldability in automated production processes for manufacturing of earthing straps, connectors or electrotechnical components.
Request for a quoteFRÄNKISCHE INDUSTRIAL PIPES GMBH & CO. KG
Germany
Fränkische Industrial Pipes perceives itself as an international partner for developing technical sophisticated corrugated tubes, tubing systems and cable protection tubes as well as fluid systems for the automotive sector, household appliances, machine engineering and apparatus engineering and also for the industrial sector. The range of accessories is tailored to the most diverse applications of our corrugated tubes and protective sleeves
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Low pressure hoses and fittings / Fittings for oil- and fuel hoses / Plastic connectors / Cross-hose connector Product number supplier 244220
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The Metzner EM 300 platform offers further convenience in high-voltage cable processing through a quick change of process tools and faster cycle times. Depending on the requirements, the HV cable processing machine can thus be equipped with different tools for cable processing. This means that the EM 300 can be used for several processing steps and is prepared for a wide range of processes. In addition, with the EM 300 we protect your investment by offering improved expandability that enables “plug-and-play” integration of future new applications.
Request for a quoteFATH GMBH
Germany
Description: Nut to be used in conjunction with a hammer head screw Measures: M6 / M8 Material: Zinc plated steel / stainless steel
Request for a quoteFRÄNKISCHE INDUSTRIAL PIPES GMBH & CO. KG
Germany
The directly mountable fittings made of specially modified, halogen-free polyamide 6 are resistant to most common chemical media. The excellent UV-resistance allows an outdoor use without hesitation. Thanks to the newly developed 360° locking system and the internal pipe seals, the fittings in conjunction with our FIPLOCK® corrugated tubes meet the highest possible protection class IP69. Delivered ready-assembled and re-opened with the aid of a simple slotted screwdriver, the fittings offer significant time savings during assembly and disassembly and offer various combination options.
Request for a quoteLEONI DRAHT GMBH
Germany
High-flexible round strands and ropes made from Cu-ETP1, Cu-OF1, aluminium and LEONI Histral® alloys (upon request) in bare, tin-plated, nickel-plated and silver-plated, hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 630 mm² (bigger cross-sections upon request). High-flexible round strands and ropes are mainly suitable for earthing straps, connectors, conductors for low-voltage lighting and for welding technology.
Request for a quoteETTINGER GMBH
Germany
IDC & Standard Connectors, Flat Blade Connectors/ D-Sub Connectors, IP66/68 Connectors, USB/Ethernet/Coaxial Connectors Since 1964 the innovative family business Ettinger GmbH has been your dependable partner for electronic and mechanical components. Customers benefit from our wide one-stop product range, excellent stock availability and reliable delivery. Our range covers everything from spacers to switches in many designs. We have more than 28,000 products available from stock. Nationally and internationally many manufacturers have classed us as an A-supplier of the category C parts they require daily. Long-standing collaboration with leading manufacturers guarantees consistently high product quality which is also constantly controlled by our quality assurance system, certified in accordance with DIN EN ISO 9001:2008.
Request for a quoteETTINGER GMBH
Germany
Blade Terminals, Blade Receptables/ Connectors, Pin Headers/ Jumpers, Terminal Strips Since 1964 the innovative family business Ettinger GmbH has been your dependable partner for electronic and mechanical components. Customers benefit from our wide one-stop product range, excellent stock availability and reliable delivery.
Request for a quoteResults for
Connectors - Import exportNumber of results
16 ProductsCompany type