Concentrators - Import export

Strands with a concentric structure made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 630 mm². The individual wires are subject to an exact positioning around a core wire, which ensures an all-out uniform structure. Concentric strands are particularly appropriate for thin-gauge coating with high-grade isolation materials (extrusions). 7-end strands are especially suited for data cables with high frequencies of transmission. The technical qualities of a concentric strand can be extremely well and accurately customized by combining several different alloy wires.

Coating of threads with galvanized surfaces, e.g. screws for flakeboards to achieve controlled friction values Prevents cold-fretting Advantages and benefits Economical through low consumption (can be diluted with tap water) The coating can be checked easily through a fluorescent ingredient Tools and containers can be cleaned with water Does not contain any toxic components and is therefore sanitary harmless The water-soluble ingredients are biodegradable, the water-nonsoluble ingredients are ecologically neutral Forms a colorless, adhesive and tack-free sliding film after drying. With an inhibitor, which prevents from corrosion during the drying

Protection of surfaces of all kinds and welding nozzles for oxyacetylene gas and inert-gas arc welding Prevents baking on of weld spatters on surface and welding nozzle Advantages and benefits Later painting over, metallising and printing following prior cleaning easily possible Environmentally friendly, non-combustible Silicone-free Can be removed residue-free OKS 1600 is also suitable for use with the refillable Airspray system Also available as spray version OKS 1601

Lubricating oil additive for heavily loaded friction and rolling bearings for increasing the lubricating effect, improving the high-pressure properties and reducing the temperature increase Gear oil additive to guard against gearwheel damage Stops pitting and is especially suitable for gearbox designs with a high percentage of sliding Engine and compressor oil additive for reduced wear and increased operating safety, as run-in and smoothing lubricant Machining oil additive for chip-free or cutting production to increase working speeds and tool life Advantages and benefits Excellently suited as performance-increasing additive, as additive to bed track oils, engine oils, C/CC oils and slightly alloyed industrial oils Highly effective due to finest, homogeneous MoS₂ distribution in the oil Broad range of uses with many different oils and alone as a high-performance oil Lowest friction due to high lubricating effectiveness of MoS2 Fully stabilised without precipitation

Cleaning of cooling devices, beverage and goods vending machines Cleaning of tiles, ceramics or natural stone Cleaning of construction machines and lorries, tarpaulins Cleaning of machine tools and workshop floors Advantages and benefits NSF A1 registered No classification marks according to (EG) No. 1272/2008 Free of organic solvents and phosphates Readily biodegradable Good separation behaviour Gentle to plastics, seals, rubber and sensitive metal surfaces Depending on the degree of soiling, can be diluted up to 1:10 Suitable for use with high-pressure cleaners MOSH/MOAH-free

Coating of threads with galvanized surfaces and high-alloy steel threads to achieve controlled friction values Prevents cold-fretting Advantages and benefits Economical through low consumption (can be diluted with tap water) The coating can be checked easily through a fluorescent ingredient Tools and containers can be cleaned with water Does not contain any toxic components and is therefore sanitary harmless The water-soluble ingredients are biodegradable, the water-nonsoluble ingredients are ecologically neutral With an inhibitor, which prevents from corrosion during the drying

Protection of surfaces of all kinds and welding nozzles for oxyacetylene gas and inert-gas arc welding Prevents baking on of weld spatters on surface and welding nozzle Advantages and benefits Later painting over, metallising and printing following prior cleaning easily possible Environmentally friendly, non-combustible Silicone-free Can be removed residue-free

Strands with a semi-concentric structure made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.03 mm² to 16 mm². The individual wires are subject to an exact positioning, yet without an additional core wire, which ensures an all-out uniform structure. Concentric strands are particularly appropriate for thin-gauge coating with high-grade isolation materials (extrusions). The technical qualities of a semi-concentric strand can be extremely well and accurately customized by combining several different alloy wires.

Semi-concentric or concentric strands with very short lay lengths and an extraordinarily smooth surface made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 16 mm². LEONI has had its manufacturing process specifically dedicated to this type of product patented. LEONI smooth bunches boast an exceptionally compact and precise round structure and have a very good Flex life. They are particularly suitable for moving applications and for thin-gauge coating with high-grade isolation materials benefitting from a long flex life as well as weight and space efficiency.

Properties and Advantages • improved metal flow, superior die filling, lower die pressures • spontaneous formation of a thin, uniform lubricating film; in that way a perfectly sprayed film without blank spots is achieved • protection of die steel from erosion • no build-up inside the die cavity • improved die life • shorter spraying cycle • no blocking of spray nozzles and maintenance/problem-free production, even under most severe forging conditions • cost-efficient

Release agent based on 25 years of product development Temperature Range 150 °C bis 380 °C Alloy Al, Mg, Zn Properties and Advantages • high process reliability due to extremely stable micro-emulsion • excellent release effect, bright castings • parts perform unproblematically in joining processes

Tried and tested release agent, which is qualified for glueing and welding of structural castings Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • ideally suitable for conventional as well as micro-/minimal spraying • approved for glueing, welding, painting and powder coating • no build-up • die wetting already at lower temperatures