Combines - Import export

The new QuellTech Q5 Laser Scanner Series combines the advantages of small form factors with both high resolution and scan rate. The sensor disposes of different set-up possibilities with respect to the analysis algorithm. Measurement results are delivered via Ethernet, calibrated in the X / Z plane. Special adjustable algorithms can be selected, extremely useful particularly also for optically most demanding surfaces. Time-consuming calibration tasks for the user are no more required, as the calibration routine runs on board. High Scan Rate with up to 14,000 Profiles per Second Due to an appropriate limitation of the image range (AOI) in X and Z direction, the scan rate could considerably be increased. High resolution and detection frequency with up to 14.000 profiles and 28 Mio. points per second •X measuring range from 10 to 1022 mm •Z measuring range (height) from 5 to 878 mm •Laser wave length blue 405/450nm, red 650nm

https://www.lindner-kunststoffprodukte.de/en/child-resistant-packaging/

Aral MegaTurboral LA 10W-40 is based on the strict requirements of the latest generation of Euro 4.5 and 6 engines with exhaust aftertreatment systems, for which a lubricant with a reduced content of sulfate ash, phosphorus and sulfur (Low SAPS) is prescribed, to ensure safe operation. The formulation enables a maximum reduction in exhaust emissions to comply with Euro 4.5 and 6 limits. Application Aral MegaTurboral LA 10W-40 was developed with special consideration of the requirement profiles for exhaust gas aftertreatment systems, especially when using diesel particle filters in commercial vehicles. Advantages Low SAPS technology optimizes the efficiency of the exhaust gas aftertreatment and thus ensures safe compliance with the legally prescribed Euro 4.5 and 6 limit values. Synthesis technology enables oil change intervals to be extended while taking into account the manufacturer's instructions and reduces maintenance costs and the resulting downtime.

EP Fluid Grease Description Castrol CLS Grease is a high pressure fluid grease developed using an optimized combination of synthetic base oil, lithium thickener technology and a specially selected additive system containing EP/anti-wear additives, antioxidants and corrosion inhibitors. Application Castrol CLS Grease is a high-quality EP fluid grease with excellent low-temperature properties, which makes it particularly suitable for use in central lubrication systems of commercial vehicles and is approved in accordance with the following approvals: - MAN 283 Li-P 00/000 - Mercedes Benz 264.0 Castrol CLS Grease is also used as an excellent multi-purpose fluid grease for industrial and automotive applications where a combination of excellent EP performance and corrosion resistance are the core requirements. Temperature range -40ºC to +100ºC

Vehicles and systems that are used under extreme conditions need the right greases to protect important components. Our product range includes a large selection of multi-purpose and special greases from leading manufacturers for outstanding protection even under the highest operating conditions. Whether lubricating bearings in commercial and construction vehicles or using greases according to manufacturer specifications in classic cars – the optimum grease can extend the service life and maintenance intervals of machines, increase productivity in the vehicle fleet and optimize bearing function. We can advise you personally on the right choice of synthetic multi-purpose and special greases for individual applications.

The thermoIMAGER TIM QVGA and TIM VGA cameras are used for stationary thermography tasks where high resolution is required. Due to their high thermal sensitivity, these cameras also detect even the smallest of temperature differences. Both standard lenses and special microscope lenses are available for the TIM QVGA and TIM VGA cameras. The microscope lens enables detailed macro shooting of the smallest of elements. High-resolution macro shooting is possible with a spatial resolution of 28 µm. The distance between the target and the camera varies between 80 mm and 100 mm.

Based on our Unipower Series we evolved this series to the next step with a slider system and a customized self-finding plug concept. More over a cluster management system is integrated, that several batteries can be controlled in one system.

https://www.lindner-kunststoffprodukte.de/en/child-resistant-packaging/

Model Name: Mid-Century Modern Armchair This elegant Mid-Century Modern Armchair seamlessly combines style and comfort, making it an ideal addition to any space. It features: Material Options: The frame can be crafted from various types of wood, such as oak, walnut, or beech. The upholstery fabric is customizable in any color or texture according to customer preference. Dimensions: Height: 80 cm Width: 55 cm Depth: 55 cm Seat Height: 45 cm With its sleek design and comfortable seating, the Mid-Century Modern Armchair adds a touch of sophistication to any interior.

Product Description: Model Name: The Round Chair This elegant Round Chair combines classic design with modern comfort, making it an ideal addition to any space. It features: Material Options: The frame can be crafted from various types of wood, such as oak, walnut, or beech. The upholstery fabric is customizable in any color or texture according to customer preference. Dimensions: Height: 76 cm Width: 63 cm Depth: 52 cm Seat Height: 45 cm With its sleek, curved design and comfortable seating, The Round Chair adds a touch of mid-century elegance to any interior, providing both style and functionality.

Model Name: Elbow Chair This elegantly designed Elbow Chair combines simplicity with comfort, making it a perfect addition to any interior. It features: Material Options: The frame can be customized with various types of wood such as oak, beech, walnut, or teak. The upholstery fabric is also customizable in any color or texture according to customer preference. Dimensions: Height: 73 cm Width: 54 cm Depth: 46 cm The Elbow Chair offers both style and functionality, ensuring it complements any decor with its refined appearance and comfortable seating.

Model Name: Cane Webbing Chair This elegant Cane Webbing Chair is perfect for any decor, combining classic design with modern materials. It features: Material Options: The frame can be made from various types of wood, including oak, beech, walnut, or teak. The upholstery fabric is customizable to any color or texture according to customer preference. Dimensions: Height: 78 cm Width: 54 cm Depth: 51 cm Seat Height: 45 cm The Cane Webbing Chair offers both comfort and sophistication, making it an excellent addition to any interior space.

TOPTICA's iChrome CLE is a compact laser engine that combines four laser lines in one box. All integrated colors are provided via one polarization-maintaining single-mode fiber. It is available with 405, 488, 561 and 640 nm and more than 20 mW guaranteed output power after the fiber each. The system guarantees a plug & play installation since it includes TOPTICA's proprietary COOLAC automatic alignment technology.

TOPTICA's beat detection consists of two flexible modules: DFC BC and DFC MD. Separating beam combination and beat detection into two units allows for placing them at different locations. The DFC BC and DFC MD units are specifically designed for a combination of the DFC with TOPTICA's DL pro tunable diode laser series, but can also be used with other cw lasers.

Perfect combination Aluminum alloys, for example, have a number of properties – low weight, ease of processing, and high structural strength – which make them ideal for use in automotive construction. However, they are not corrosion- or wearresistant enough for some specialized applications. Surface finishing with a finely-tuned chemical nickel layer adds the perfect final touch to the material: corrosion- and wear-resistance with perfect contouring on the component surface. This process allows companies to significantly reduce the application of chemicals by combining several different measures. These include filter technologies, automatic nickel controllers, or ion exchanger flushing to extend service lives. Sophisticated energy management systems that intelligently control heating and cooling output and current consumption also improve system efficiency.

Combination braid from Carbon reinforced expanded Graphite Tape and Carbon Fiber Practical useful application data: max. temperature: +250 °C Characteristics High standardisation potential Wear resistant through running track reinforcement, nevertheless shaft protecting Recommended shaft surface hardness: HRC 45 Excellent heat conductivity, suitable for dry running applications Non-hardening, good reset capability, coefficient of thermal expansion like steel Self lubricating excellent use in pumps, minimising the need of Flushwater Operating range Pressure [p max]: 25 bar, Velocity [v max]: 30 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +300 °C pH: 2 - 12 Density: 1.00 g/cm³ Practical useful application data: max. temperature: +250 °C Main application Centrifugal pumps Boiler feed water pumps Mixer Agitators Refiner Kneader Suitable for Power plant technology Boiler houses Pulp and paper industry Chemical and...

Combination Braid of ePTFE with incorporated Graphite and Para-Aramid Fiber Corner Reinforcement with Special Blocking compound Practical useful application data: max. temperature: +200 °C Characteristics Reinforced packing with reduced wear through improvedheat conductivity Recommended shaft surface hardness: HRC 50 Safe universal packing for abrasive media Extrusion resistant, ideal for worn equipment with bigger gap width Development: Better sealability of stuffing box Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 500 bar, Velocity [v max]: 3 m/s Pressure [p max]: 250 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Suitable for Pulp and paper industry Sugar industry Waste water technology Chemical industry Variant Square shape S12K Plunger with ParaAramid-Corner...

Combination Braid of ePTFE with incorporated Graphite and Polyimid Fiber with Run-In Lubricant Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Combination braid with extended pH-range of 0 - 12 Improved heat conductivity and increased mechanical strength due to special material combination Reduced wear of the shaft surface. Recommended shaft surface hardness: HRC 35; Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 0 - 12 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Kneader Agitators Refiner Suitable for Chemical industry Chemical Sewage Universal use Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and...

Combination Braid of ePTFE with Incorporated Graphite and Para-Aramid Fiber Surface reinforcement with Run-In Lubricant Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Even and reduced shaft surface wear Excellent heat conductivity Recommended shaft surface hardness: HRC 45 Safe and universal packing with abrasive media Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Kneader Agitators Filter Refiner Suitable for Chemical industry Pulp and paper industry Waste water technology Variant S12K Plunger with Para-Aramid Cornerreinforcement, available 6 mm and above Form of delivery This packing can be manufactured from...

Combination braid of ePTFE Yarn incorporated with Graphite, Meta-Aramid Fibers and special impregnation Practical useful application data: max. temperature: +200 °C Characteristics Excellent Standardisation possibilities High Cross Sectional density, yet still elastic and flexible Suitable for use with hardening and crystallizing products Displays reduced wear through special running track reinforcement Unique formulation impregnation improves flexibility, ensures packing will not harden Provides excellent chemical resistance Recommended shaft surface hardness: HRC 35 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 150 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Fittings Filter Suitable for Pulp and paper industry Chemical industry Form of delivery This...

Acidic, neutral or alkaline wet media Aqueous media remove dirt particles from surfaces and rinse them off. Aqueous detergents disperse particles, and form or separate emulsions. They act on the surfaces of parts. If required, aqueous media can be used to alter the surface properties of parts by passivation (phosphatising), pickling, etc. In all applications, the treatment of the medium itself is of crucial importance. Aqueous media are powerful detergents. Solvents are wet media that are able to dissolve substances without actually reacting with them. The most commonly used cleaning solvents are hydrocarbons and modified alcohols with a flash point > 55°C, and halogenated hydrocarbons. Solvents remove dirt particles from surfaces and rinse them off. Advantages Short cycle times, energyefficient drying, low solvent consumption, long medium service life and easy treatment.

The iFischer® DIST D2892/5236 CC or FISCHER® AUTODEST® 800/860 AC is a fully computer controlled unit of turnkey design, and ready for use after installation and commissioning. Fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. The automatic fraction collector (in the system section TBP with 20 receivers) includes a builtin internal balance for the determination of the fraction weight, while the separate volume follower system is used for discharging the fractions into the final receivers and the determination of the fraction volume as well as for the direct distillation rate control. The automatic fraction collector (in the system section Potstill with 12 receivers) includes a builtin internal balance, which is used for the simultaneous determination of the fraction weight and for the direct distillation rate control.

Combi Hinge to hinge panels or aluminum profiles diferent Models, Materials, Sufaces, Colors combinable hinge wings: 20, 25, 30, 35, 40, 45, 50, 60 Material: Plastic PA, glass fiber reinforced, electrostatical discharging, Stainless Model: detachable, non-detachable, with/without locking lever, electrostatical discharging, centerings bolts (optional), stainless steel axis Surface: laquered, Matt nickel plated and chromated Color: black, grey, aluminum colored, further colors on request Fastening: using countersunk screws

HELIO®Clean 2 is a combined conveying-/ mixing-/ and dedusting device for virgin material and regrind. The dust is removed through a 2-stage dedusting system. The compact design makes it ideal for mounting on the feed zone of the processing machine or on a drying container. The separated dust content is sucked out into an external collection bin. Available in 1- or 2-component version, filling is carried out by the integrated compressed air conveying technology with Venturi suction lance(s). Quality: Dust in granules causes lowered mechanical properties of technical plastic resins, leads to problems with surface finish in case of transparent parts, to high rate of rejects basing on smudges or white/black dots in transparent injection moulding parts like for example optical lenses of PC and PMMA. Professional cleaning of resins brings the quality to the original state again and optically perfect parts can be produced.

The planning and development of our systems are always made according to customer requirements. Whether in combination with container, drying equipment, conveyors, pellet production, saw mills, particle board / furniture industry or in other areas of application. Conveying vertical Low rotational speeds Standard execution Low noise Planning according to the customer

SOLID Sub-cutaneous Use After removal of the security clip and protection cap the syringe is ready for use. The doctor applies the implant syringe to the patient’s tissue, injects subcutaneously and presses the implant syringe completely together. During the application, the syringe shell is always in touch with the skin. First the tablet (implant) is placed in the tissue via the plunger in the needle channel and then the needle is withdrawn from the patient’s tissue. After the administration the needle is protected both by the plunger and by the needle cover, afterwards the syringe can be disposed as usual. Implant Syringe (drug device combination product) Monodose The implantation syringe is qualified for the placement of rod-shaped, long-acting tablets. These are intended to release their active substance gradually into the tissue layers of the patient. For this purpose, it is necessary that the tablet is placed subcutaneously by a needle. Generally, this is done with a...

Aero Carb Z filters are disposable type pleated panels which offers extended surface filtration combined with odor control, designed to suit a wide variety of HVAC applications including Hospitals, Pharmaceutical companies, Food processing units, Restaurants, Airports, Commercial Buildings etc. Aero Carb Z filters are available in MERV6 / G4 / EU4 and Aero Carb Z85 offers MERV 13 / F7 / EU7 efficiency. These filters comes in 25mm, 45mm and 95mm depths. These filters are recommended as direct replacements to existing pleated air filters. Filters are easy to install and completely disposable too.