Cleaning spray - Import export

The wet medium is sprayed through nozzles onto the surfaces of the parts. Particles are removed from the parts by kinetic energy, and then washed away. The cleaning result is primarily determined by the position and shape of the nozzles, the spray pressure and the volume of media applied to the parts. In industrial parts cleaning, the surfaces are then normally rinsed and dried.

Coating of pipings and air ducts, firing, boiler and heating systems, tanks, exhaust systems, silencers, light-metal bodies on utility vehicles Repairs to mechanically (stone impact) or chemically (de-icing salt) damaged aluminium rims Shielding of non-metallic materials, e.g. cardboard, wood, glass or plastics etc. Advantages and benefits Excellently suited for sole, decorative corrosion protection Universal protective and decorative coating for all materials Economical due to low consumption and self-cleaning spray valve High covering capacity Fast-drying

Decorative corrosion protection on the basis of zinc and aluminium powder as a second layer over zinc sprays (e.g. OKS 2511) for forming a weather-resistant surface with aluminium gloss. Repair of galvanising interrupted or damaged during welding, drilling or cutting without subsequent painting Suitable as a decorative glossier coating than at normal zinc sprays Advantages and benefits Highly effective due to proven formula with high percentages of zinc and aluminium Combines outstanding zinc protection with decorative aluminium gloss Can be welded through well Economical due to low consumption and self-cleaning spray valve

Touching-up damaged points on galvanised surfaces, for example after welding, drilling or cutting processes Priming of ferrous metals when zinc galvanising cannot be carried out. For example, in vehicle and ship repairs, in steel building construction, civil engineering and bridge building, in tank and overhead line construction, on grids, fence and traffic signal posts, exhaust systems, drain gutters Also suitable for spot welding thanks to the good electrical conductivity Advantages and benefits Highly effective due to active, cathodic corrosion protection Versatile use as durable corrosion protection at thermally stressed metal parts Highly economical due to low consumption and self-cleaning spray valve Supplements galvanising and forms a rough adhesive surface for subsequent painting

For lubricating machine elements under high loads (also under water influence) Lubrication of chains, joints and guides Lubrication of rolling and friction bearings Lubrication of toothed gearings, fittings, hinges and locks Advantages and benefits NSF H1 registered MOSH/MOAH-free The optimal additives allow good resistance to oxidation and ageing for long operating and durability Resistant to cold and hot water, steam and alkaline and acidic disinfectants and cleaning agents Also available as spray version OKS 3751

Concrete pavers and slabs as well as natural stone pavers are cleaned with it down to the joints and appear fresh and clean again. Joints soiled by moss and sediments are also easily cleaned with the special spray cans. A particular advantage here is the integrated splash guard, thanks to which there is no nuisance to passers-by or pollution of the adjacent environment. Protective clothing and subsequent cleaning operations, which are unavoidable with conventional cleaning equipment, are no longer necessary with the Easyclean EC-60. With the four large wheels of the Easyclean EC-60, pushing is also particularly easy.

The ROBOMAT models are designed for the cleaning of a wide range of parts and cater for various levels of cleanliness. Operators can place workpieces and parts of various size and geometry in the processing chamber of the sturdy unit where they are spraycleaned to a high cleanliness level. The model with two baths is particularly suitable for surface cleaning prior to painting and final assembly. Suitable for cleaning, phosphatising and rinsing.

The ROTIMAT 3U is a universal machine for the cleaning of a wide range of parts. It guarantees maximum technical cleanliness, irrespective of the degree of contamination of the parts. It is equipped with two baths for cleaning, and subsequent iron phosphatising/rinsing, wherby each bath has its own pump cycle. The ROTIMAT 3U can be operated with standard baskets or customised parts carriers. Cleaning with aqueous media (acidic, neutral or alkaline) 660 x 480 x 300 mm 4 x 480 x 320 x 200 mm Spray cleaning for extra demanding applications Catering for wide range of parts Suitable for any cleanliness level from light dirt removal to high technical cleanliness Available as 2bath unit with loading of the unit via Manual loading table Manual charging unit Automatic charging unit

The TWT combines a number of cleaning methods in a single unit. Through immersion any spray cleaning with alkaline, neutral or slightly acidic aqueous media, it caters for a wide range of parts and meets even the most stringent requirements regarding technical cleanliness. The cleaned parts are dried under vacuum for extra fast processing. All machine components that come into contact with media are made in stainless steel, allowing for the use of fresh and demineralised water.

The modular, preassembled PERO NEPTUN units are available at short notice for your specific application The NEPTUN is a universal machine for the cleaning of a wide range of parts. It guarantees maximum technical cleanliness, irrespective of the degree of contamination of the parts. The NEPTUNfeatures two baths and has been designed for reliable intermediate and final spray cleaning with aqueous media. Its touch panel control enables to devise and run customised cleaning programmes. Cleaning with aqueous media (acidic, neutral or alkaline) 660 x 480 x 300 mm 4 x 480 x 320 x 200 mm Powerful spray cleaning Universal machine Suitable for any cleanliness level from light dirt removal to high technical cleanliness Available as 2bath unit with loading of the unit via Manual loading table Manual charging unit Automatic charging unit

The ROTIMAT 1A has been designed for the spray cleaning of all workpieces that can be placed in the sturdy rotating basket. After production or repair, the workpieces and parts are cleaned with a hot aqueous cleaning medium that is sprayed onto the parts from all sides. The unit can be loaded from the front, or from the top, using lifting gear. The compact machine is equipped with four castors for easy relocation within the factory. Cleaning with aqueous media (acidic, neutral or alkaline) Universell cleaning unit for many different workpieces Compact portable unit with castors Drying without external heat input, or with optional extractor fan Available as 1bath unit with loading of the unit via Manual loading

The compact KDA tunnel units cater for high throughput rates combined with excellent cleaning and drying. They have been designed for the treatment of parts of many different geometries and sizes. The KDA is available with belts of various widths (200/500/650 mm) and a range of features and accessories to cater for many different cleaning tasks. The KDA is available as 1, 2 and 3bath unit. Cleaning with aqueous media (acidic, neutral or alkaline) Spray cleaning unit for wide range of parts High throughput rate Compact, durable design Available as 1, 2 and 3bath unit with loading of the unit via Robot loading Manualm loading Construction side conveyor technology

Dina Rinsing Gun with 8 Attachments with Luer Lock Connection Cleaner for professional cleaning of tubes, cannulas, Laryngoscopes, Otoscope and Suction Tips. Gun runs with water or pressured air. Easy to connect in every lab, clinic or medical practice. Dina Cleaning Gun with 8 attachments for Water & Pressured Air The aluminium Dina cleaning and rinsing gun is used for cleaning medical instruments. Known from the sterilization department in hospitals. The 8 attachments are srewless attachable to the gun by hand. Works up to 10 bar water & air pressure.

Washing Pistol / Gun for autopsy/ laboratory tables Washing gun with different water spray patterns to clean big surfaces, Laboratories, stainless steel furniture, tables etc. Widley used at the Autopsie, examination, pathology, veterinary medicine. •Flow volume is presettable •Spray pattern is in nitely adjustable from full to spray jet •Ergonomically formed soft-rubber handle with locking device for continuous spraying •Incl. cone for table or wall mount •Incl. water connection set with either ½“ or ¾”