Chemical plants - Import export

The sliding gate control valve type 8044 in short design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant design. Due to the direct and backlashfree installation of the positioner on that piston actuator, these valves have no exposed moving parts and are characterized by a high control quality and control dynamics. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Limit switch Position feedback Pilot valve . . .

The sliding gate control valve type 8043 in a reinforced version and long design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant design. Due to the direct and backlashfree installation of the positioner on that piston actuator, these valves have no exposed moving parts and are characterized by a high control quality and control dynamics. Digital positioner type 8049 Electropneumatic positioner type 8047 Pneumatic positioner Positioner with integrated process controller Metal bellows Limit switch Position feedback Pilot valve . . .

The sliding gate control valve type 8043 in long design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. Due to the direct and backlashfree installation of the positioner on that piston actuator, these valves have no exposed moving parts and are characterized by a high control quality and control dynamics. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Metal bellows Limit switch Position feedback Pilot valve . . .

The sliding gate valve type 8041 in the short design is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant design. This sliding gate valve with its small stroke achieves a very high cycle capacity combined with extremely fast cycle times. Metal bellows Limit switch Pilot valve Stroke limitation . . .

The sliding gate valve type 8040 in reinforced design and long construction is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. This sliding gate valve with its small stroke achieves a very high switching capacity with extremely short switching times.

The sliding gate valve type 8040 in the long design is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. This sliding gate valve with its small stroke achieves a very high switching capacity with extremely short switching times.

GEDA industrial elevators guarantee the smooth, efficient and safe transportation of people and materials precisely where they are required. Even in the toughest of conditions, GEDA products score highly with customers due to their unique quality and modern car design. The versatile deployment sites of GEDA industrial elevators cover cement works, asphalt mixing plants, chemical plants through cooling towers and silos to offshore plants and explosion-protected areas. Industrial elevators create huge time and cost savings due to efficient workflows in maintenance and service work. The GEDA Standard elevator range covers load capacities from 400 to 3,200 kg. The modular design also provides the customer with the choice of different car dimensions and hoisting speeds of up to 60 m/min. Whatever demands an elevator must meet every GEDA industrial elevator, whether a transport platform or personnel and material hoist or pure material hoist, can be perfectly adapted to on-site conditions.

The permanently installed GEDA 1200 ZP P transport platform is the strong and versatile partner for heavy loads and efficient working. People and materials are transported quickly, but – most importantly – safely. The wide range of industrial applications include asphalt mixing systems, power stations, cement works, chemical plants as well as the warehousing and logistics sector. With the flexible system, the GEDA 1200 ZP P transport platform can be adapted to individual customer requirements and on-site conditions. In addition to the three different speed variants, there is also an extensive range of platform versions. The highlight: Despite the high load capacity of 1,500 kg, the GEDA 1200 ZP P transport platform is guided on only one mast, thanks to the low anchoring forces.

New Gas Generator to check personal Gas Detectors A 100% Test in just 10 Seconds Personnel working in chemical plants protect themselves with personal gas detectors from gas exposure. Gas leaks are very unlikely to occur, so the gas detector will always display „0“. An instrument displaying zero can do so for two reasons: a) The concentration is zero. b) The instrument is defective. For good reasons a daily check of the instrument is mandatory. It would be too time consuming to perform a complete calibration every day. The daily functional test with the gas generator makes sure that no instrument failure caused by abuse or wear and tear will go unnoticed. To perform a test, it is sufficient to expose the sensor to a short puff of gas and see if the instrument gives an alarm. To make this test as fast, easy and cheap as possible, no accurate gas concentration is used, but approximately twice the value of the alarm threshold. The gas generator stops gas generation after 10 seconds automatically. If the detector fails to alarm within this time interval it is not safe to be used. The amount of gas produced when activated is very small. Therefore no restrictions regarding transportation and storage of the gas generator apply.

Braid of ePTFE Fiber with Incorporated Graphite and Silicone Run-In Lubricants Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Good heat conductivity Extended lifetime Easy installation and safe handling No ageing process Resistant against Sewage, Boiler Feed Water, Acids, Alkaline solutions, Oil and Grease Cost effective ePTFE/Graphite Packing Recommended shaft surface hardness: HRC 35 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Kneader Agitators Autoclave Refiner Vacuum pumps Suitable for Chemical industry Power plant technology Pulp and paper industry Universal use Installation and maintenance...

Spiral wound gasket made of crimped metal tape with sealing wraps of non asbestos gasket material. Optional: inner and/or outer metal ring. Characteristics For flange connections in high pressure pipe line construction and fittings Extremely low leakage with PTFE spiral. Helium leakproof 10 - 8 mbar l/(ms) High temperature resistance to 550 °C with graphite spiral Media resistance: pH 0 - 14 Max. pressure load: p = 400 bar Temperature range: t = -200 to +550 °C Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C Pressure: p = 400 bar Main application High temperature and high pressure flanges Piping Pressure vessels Heat exchangers Fittings Suitable for Power plants Petrochemical plants Chemical industry Material Centerring ring OD: Carbon Steel galvanized Spiral: 316L Centerring ring ID: Carbon Steel galvanized Other material combinations on request Product Types SF 11 Spiral wound gasket without any center ring for flanges with tongue and groove connection SF...

High Temperature Gasket of Expanded Flexible Graphite with Stretchmetal Characteristics Expanded graphite sheet gasket with Stainless Steel stretch metal reinforcement and a purity of 99 %. Practically no cold flow or creep under temperature. Non hardening Excellent in use with cycling temperatures. Blow out safe due to 3 dimensional reinforcement matrixes Optimized transfer of sealing stress Safe use even with small sealing width Minimized risk of separation known from multilayer reinforced gasket sheets. Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C, n oxidizing atmosphere +450 °C Pressure: p = 200 bar Main application Universal use as problem solver in all industries when demanding higher operation safety and sealability especially in older plant equipment. Suitable for Chemical industry Petrochemical plants Pharmaceutical industry Power plant technology Paper industry Sugar industry Approvals DVGW BAM TA Luft FIRE SAFE API 607 on request Form of...

Hybrid braid in W-Profile made of heat conductive ePTFE Yarn with Meta-Aramid fiber reinforcement and Run-In lubricant Characteristics Clean packing with ultimate heat conductivity for abrasive products in pumps and other rotating equipment. Recommended shaft surface hardness: HRC 35 Porosity filling coating increases density and protects the packing in crystallizing mediums. W-Profile Reinforcement reduces shaft wear Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.55 g/cm³ Main application Centrifugal pumps Mixer Agitators Kneader Filter Suitable for Pulp and paper industry Chemical industry Power plant technology Waste water technology Applications with abrasive products and when white packing is required Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special...

High strength ePTFE-Graphite Characteristics Extrusion resistant even with large clearances Form stable, wear resistant, heat conductive and can be used as bull ring Shaft protecting (recommended surface hardness: HRC 25) In high pressure applications die formed rings are recommended Operating range Pressure [p max]: 30 bar, Velocity [v max]: 8 m/s Pressure [p max]: 800 bar, Velocity [v max]: 3 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.35 g/cm³ Main application High pressure plunger- and dosing pumps Bullrings for mixers, highpressure valves agitators, gate valves and valves Suitable for Chemical industry Petrochemical plants High pressure machine constructions Approvals BAM for liquid and gaseous oxygen 60 °C/15 bar, 40 °C/65 bar, 200 °C/50 bar Form of delivery This packing can be manufactured from 3 to 40 mm square as well as in intermediate, inch sizes and special measurements. 03 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg...

Pre-compressed ring-set made of expanded graphite and reinforcement to protect against extrusion Characteristics Packingset made by combining two expanded Graphite grades and designs in order to avoid blow out and extrusion and as well enhance the sealability of this valve sealing set. The set was tested and approved by the AMTEC GmbH Lauffen in Germany. The leakage parameters of 8.6 x 10-3 mbar · l/(s·m) complies with the VDI 2440 at +400 °C, which specifies a maximum allowed leakage of 1.0 x 10 -2 mbar · l/(s·m) (test media helium) and is therefore recommended as a high grade seal system. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 160 [bar] Temperature without LiveLoading: t 400 °C Temperature with LiveLoading: t 400 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Power plant technology Chemical industry Petrochemical plants Boiler houses Refineries Approvals TA Luft / VDI 2440 Certificate

Pre compressed Packing set of expanded graphite with Inconel Matrix reinforcement and special PTFE coating Characteristics Ring Set made from special high temperature resistant yarn and pore filling cross section impregnation fulfills with a tested leakage rate of 8.4 x 10 -3 mbar · l/(s·m) the leakage criteria of VDI 2440 +400 °C with a maximum allowable leckagerate of 1 x 10 -2 mbar l/(sm) and is suitable for temperatures up to +300 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +300 °C Temperature with LiveLoading: t +300 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Control Valves Suitable for Power plant technology Chemical industry Petrochemical plants Boiler houses Approvals TA Luft / VDI 2440 Certificate ISO 15848-1 CC1 ISO 15848 test was conducted with 20,000 mechanical cycles and 2 thermal cycles (RT, +200 °C) and passed with a leckagerate of 6.1 x 10 -4 mg/s/m.

Pre-compressed Packing Set of specially impregnated PTFE fiber packing Characteristics Ring set made of pure PTFE packing and PTFE compound bull rings fulfills with a tested leakage rate of 4.2 x 10 -5 mbar · l/(s·m) the leakage criteria according to VDI 2440 +200 °C with a maximum allowable leakagerate of 1 x 10 -4 mbar l/(sm) and is suitable for temperatures up to +200 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +200 °C Temperature with LiveLoading: t +200 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Power plant technology Chemical industry Petrochemical plants Approvals TA Luft / VDI 2440 Certificate

Pre-compressed Packing set of specially impregnated PTFE fiber packing Characteristics Ring set made of pure PTFE packing fulfills with a tested leckage of 6.3  x 10 -6 mbar · l/(s·m) the leakage criteria according to VDI 2440 +200 °C with a maximum allowable leakagerate of 1 x 10 -4 mbar l/(sm) and is suitable for temperatures up to +200 °C. Operating range Pressure without LiveLoading: p 40 [bar] Pressure with LiveLoading: p 100 [bar] Temperature without LiveLoading: t +200 °C Temperature with LiveLoading: t +200 °C pH: 0 - 14 Main application Valves Flaps Gate valves Fittings Suitable for Chemical industry Petrochemical plants Approvals TA Luft / VDI 2440 Certificate EU 10/2011 / EG 1935:2004 FDA

PTFE-Graphite Fiber with Paraffin Run-In Lubricant Practical useful application data: max. temperature: +180 °C max. pressure centrifugal pumps: 20 bar Characteristics Special lubricating graphite minimizes friction and guarantees greater heat conductivity Shafts or shaft sleeves in HRC 25 recommended Universal PTFE/Graphite packing with good value for money Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.65 g/cm³ Practical useful application data: max. temperature: +180 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Kneader Agitators Autoclave Refiner Gate valves Suitable for Chemical industry Power plant technology Pulp and paper industry General industries Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special...

The NASH 2BE5 was developed from the proven NASH 2BE3 and 2BE4 pumps, whose reliable performance has been further improved. The development focused on optimizing performance, higher vacuum capabilities and ease of maintenance. NASH 2BE5 Benefits include: improved efficiency higher vacuum levels (to 100 mbar abs / 3" Hg abs) built-in ECO-FLO™ water saving technology with patent pending gas scavenging drop in replacement for 2BE3 and 2BE4 removable bearing brackets for easier maintenance elimination of tie rods, resulting in improved sealing due to bolted casing joints polyisoprene lining The footprint and connections to the NASH 2BE5 models are identical to its predecessors, the NASH 2BE3 and 2BE4. Therefore, exchanging or upgrading to the more efficient NASH 2BE5 requires no site modifications. The NASH 2BE5 model is available in cast iron, with stainless steel coming soon. The 2BE5 is perfect for use in mining, filter applications, paper mills, power plants, chemical plants, refineries and more.

The NASH 2BE5 was developed from the proven NASH 2BE3 and 2BE4 compressors, whose reliable performance has been further improved. The development focused on optimizing performance, higher vacuum capabilities and ease of maintenance. NASH 2BE5 Benefits include: improved efficiency higher vacuum levels (to 100 mbar abs / 3" Hg abs) built-in ECO-FLO™ water saving technology with patent pending gas scavenging drop in replacement for 2BE3 and 2BE4 removable bearing brackets for easier maintenance elimination of tie rods, resulting in improved sealing due to bolted casing joints polyisoprene lining The footprint and connections to the NASH 2BE5 models are identical to its predecessors, the NASH 2BE3 and 2BE4. Therefore, exchanging or upgrading to the more efficient NASH 2BE5 requires no site modifications. The NASH 2BE5 model is available in cast iron, with stainless steel coming soon. The 2BE5 is perfect for use in mining, filter applications, paper mills, power plants, chemical plants, refineries and more.

1800 - 2600 CFM / 3,050 to 4,400 m³/h Found primarily in petroleum refineries and chemical plants, this rugged and reliable compressor handles highly toxic, explosive and corrosive gases in applications such as flare-gas, chlorine and Vinyl Chlorine Monomer (VCM) recovery. Together with the 14 new GARO models and other NASH liquid ring compressors, the NASH HP-9 compressor form the NASH core compressor product line, which provides compression greater than 200 psig (15 Bar abs). Low pressure compressors are available to 30 psig (3 Bar abs), and 20,000 CFM (34,000 m³/hr). As a result, NASH offers the widest pressure and capacity ranges of liquid ring compressors available worldwide.

100 - 1800 CFM / 170 to 3,050 m³/h The GARO line of liquid ring compressors expands the capacity and pressure ranges of the Nash line to meet the ever growing requirements of our customers. Found primarily in petroleum refineries and chemical plants, these rugged and reliable compressors handle highly toxic, explosive and corrosive gases in applications such as flare-gas, chlorine and Vinyl Chlorine Monomer (VCM) recovery. The GARO line, available in single and two-stage designs, comes in: cast iron, stainless steel, carbon steel, spheroidal cast iron, 316 stainless steel, duplex stainless steel, and Hastelloy or Titanium on select models. Together with other NASH liquid ring compressors, including the HP-9, the 14 GARO models form the NASH core compressor product line, which provides compression greater than 200 psig (15 Bar abs). Low pressure compressors are available to 30 psig (3 Bar abs), and 20,000 CFM (34,000 m³/hr). As a result, NASH offers the widest pressure and capacity ranges of liquid ring compressors available worldwide.