Carbone - Import export

Activated Carbon Filter Cartridges Pressed and extruded micro activated carbon core Prevent the release of carbon particles into the filtrate Excellent adsorption characteristics for chlorine and organic compounds

For high-tech applications requiring high strength and stiffness combined with light weight, SIGRAFIL continuous carbon fiber tows are indispensable. They form the basis for high-performance composite materials such as textiles and prepregs, as well as components made of carbon fiber-reinforced plastic (CFRP). Carbon fibers are used in the automotive industry, in aerospace, in wind turbines, but also in sports equipment or mechanical engineering. By applying different types of sizing, the carbon fibers can be optimally matched to different matrix systems.

Carbon monoxide CO

Carbon monoxide CO

Carbon monoxide CO

Carbon monoxide CO

Carbon dioxide CO2

Carbon dioxide CO2

Carbon dioxide CO2

Carbon monoxide CO

Carbon dioxide CO2

Carbon dioxide CO2

Activated Carbon Filter Cartridges Pressed and extruded micro activated carbon core Prevent the release of carbon particles into the filtrate Excellent adsorption characteristics for chlorine and organic compounds

The sliding gate manual valve type 8051 in short design is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

What you can expect with an APROVIS ActiCo: - Careful gas purification - Reduction of emissions - Damage prevention - Higher operational reliability - An improved combustion process - An extended activated carbon service life

Carbon dioxide detection in industrial plants: Measuring range 0 – 5 % or 0 – 2 % vol. For Martians – provided they exist – a carbon dioxide atmosphere might be their natural habitat. We earthlings can only tolerate low concentrations of this gas. It is true that we are using the special properties of CO 2 for many purposes, but in concentrations above 5000 ppm it can be hazardous to our health. Therefore it must be monitored. In areas that are rarely accessed, such as beverage dispensing facilities, a leak detector might do as a warning device. Wherever people are present, such as workplaces in plants, industrial grade gas detection equipment is required. Here it is: Statox 501 IR. This new version of the field proven Statox 501 IR for combustible gases operates as a 4 – 20 mA transmitter. It can be connected directly to a recording device, process control system, or the optional Statox 501 controller. Its unmatched compact design makes it operable in any environment whether it is food industry, chemical industry, refineries, or cleaning facilities. This explosion proof instrument will do the job everywhere. It is water proof (rated IP 67). The housing materials (stainless steel and fiber-reenforced polyamide) are rugged and easy to clean.

Braided from Carbon fiber and carbon reinforced expanded Graphite Tape Practical useful application data: max. temperature in oxidizing atmosphere: +400 °C Characteristics Universal plant wide use in static and rotating applications Wear and extrusion stability through carbon fiber corner reinforcement Non hardening, good reset capability, coefficient of thermal expansion corresponds to the coefficient of steel High temperature resistance and excellent heat and electric conductivity Self lubricating, excellent use in pumps, minimizing the need of flushwater Easy to cut, assemble and disassemble Low coefficient of friction minimizes the adjustment force in valves No shaft wear, excellent dry running characteristics Rings should be compressed in valve applications at assembly approx. 15 - 20 % in height Die formed rings are recommended Operating range Pressure [p max]: 25 bar, Velocity [v max]: 30 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 300...

Carbonfiber with special impregnation and siliconfree dynamic high performance lubricant Practical useful application data: max. temperature: +250 °C max. pressure centrifugal pumps: 25 bar Characteristics Strong against abrasive mediums, yet low friction on shaft surface. Recommended shaft/sleeve hardness HRC 45 Volume stabile, minimal shrinkage, good heat conductivity Suitable as bullrings Operating range Pressure [p max]: 30 bar, Velocity [v max]: 25 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +300 °C pH: 2 - 12 Density: 1.45 g/cm³ Practical useful application data: max. temperature: +250 °C max. pressure centrifugal pumps: 25 bar Main application Boilerfeed pumps Refiner Suitable for Chemical industry Pulp and paper industry Power plant technology Boiler houses Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1...

Carbon Staple fiber with special Graphite Impregnation and silicon free Run In lubricant Practical useful application data: max. temperature: +200 °C Characteristics Volume stable, pressure stable High Cross section density due to special impregnation Excellent Value for money Graphitized all-round packing with Emergency run Capabilities Good wear resistance against abrasive and crystallizing products Recommended shaft surface hardness: HRC 45 Operating range Pressure [p max]: 20 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -50… +250 °C pH: 2 - 12 Density: 1.15 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Valves Mixer Kneader Agitators Suitable for Chemical industry Pulp and paper industry Waste water technology Community facilities Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes...

Carbonized synthetic fiber with PTFE impregnation and run in lubricant Practical useful application data: max. temperature: +140 °C Characteristics Good flexibility Rot proof Form stable packing Good value for the money Recommended surface hardness HRC50 Operating range Pressure [p max]: 15 bar, Velocity [v max]: 15 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +200 °C pH: 3 - 12 Density: 1.30 g/cm³ Practical useful application data: max. temperature: +140 °C Main application Centrifugal pumps Mixer Kneader Agitators Refiner Autoclave Gate valves Filter Suitable for Pulp and paper industry Sugar industry Waste water technology General maintenance Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and special measurements. 04 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg...

Combination braid from Carbon reinforced expanded Graphite Tape and Carbon Fiber Practical useful application data: max. temperature: +250 °C Characteristics High standardisation potential Wear resistant through running track reinforcement, nevertheless shaft protecting Recommended shaft surface hardness: HRC 45 Excellent heat conductivity, suitable for dry running applications Non-hardening, good reset capability, coefficient of thermal expansion like steel Self lubricating excellent use in pumps, minimising the need of Flushwater Operating range Pressure [p max]: 25 bar, Velocity [v max]: 30 m/s Pressure [p max]: 100 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -50… +300 °C pH: 2 - 12 Density: 1.00 g/cm³ Practical useful application data: max. temperature: +250 °C Main application Centrifugal pumps Boiler feed water pumps Mixer Agitators Refiner Kneader Suitable for Power plant technology Boiler houses Pulp and paper industry Chemical and...

Compact braided round copper flexibles made from Cu-ETP1 and Cu-OF1, LEONI Histral® alloys upon request, in bare, tin-plated, nickel-plated or silver-plated, in hard or soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.10 mm. Cross-section ranging from 0.047 mm² to 25 mm² (bigger cross-sections upon request). Round copper braids are characterised by a very high degree of dimensional accuracy and a very high Flex life. They are absolute free from twist and support an automatic further processing. Compact braided round copper flexibles are particularly suitable for carbon brushes industry, connection technology, switches or aviation industry.

Coated and un-coated manufactured special cables and wires made from a variety of raw materials can be used in various safety, control and attenuator elements in automotive engineering. We stock a wide, extremely varied, range of connection components in a variety of designs, sizes and materials, such as brass, tinplated copper, aluminium and stainless steel. Our products are made to customer specifications, in order to best meet their requirements (including breaking strength, elongation, flexing properties, corrosion resistance, DC resistance, low twist and low tension design, workability). Our manufacturing processes are permanently monitored and secured using appropriate procedures. As standard, we use both galvanised and stainless steel wire in accordance with DIN EN 10 264 with nominal strength of over 3000 Mpa with adequate ductility. We also use the non-corroding materials 1.4301 (AISI 304), 1.4310 (AISI 301) and 1.4401 (AISI 316) as standard.

ELKY special cables pass a strict manufacturing and cleaning process, in accordance with medical industry standards. Fundamentally, we only supply low twist and low tension wires and cables with a clean, high sheen, regular surface finish. We deliver manufactured products with extruded insulation made from bio-compatible materials. As well as the standard materials 1.4301 (AISI 304), 1.4310 (AISI 301), 1.4401 (AISI 316), 1.4404 (AISI 316L) and 1.4441 (AISI 316LVM), all other cabling materials authorised for use can be supplied coated and un-coated. Applications: - Guide cables e.g. for stomach tubes - Hollow cables - Strands for Temporary Myocardial Pacing Wires (monopolar, bipolar and quadripolar) - Surgial cutting strand for example for sternal closure - Strands for vein eraser - Surgical cutting strands - Wire and cables for endoscopic applications - Wire and cables for orthopaedic applications

Special application ELKY offers customer-oriented individual solutions for a wide variety of purposes. ELKY offers customer-oriented individual solutions for a wide variety of purposes; we deliver to the - Lighting technology (holding, tensioning, securing elements) - Equipment technology (telescopic pull-out safeguards) - jewelry industry Tell us your application and your specification and we will develop and manufacture a tailor-made product based on our production spectrum.

for more Information pleasee see our web page https://www.sygastec-gmbh.com/cms.html

Aero Carb V model filters are made up of activated carbon media, close pleated and bonded to a rigid V shaped construction in anticrash polystyrene frame. These filters operate with no carbon shedding, with very low pressure drop and are incinerable. A combination of synthetic media and activated carbon ensured higher degree of filtration efficiency.