Attachment - Import export

The requirements for the dismantling parts are just as high as for the actual body. The surfaceCONTROL 2500 is used for the defect detection of attachments and interior parts. This enables the objective and reproducible identification and classification of defects. The surfaceCONTROL 2500 is used, for example, to inspect small parts such as fuel filler flaps, to detect defects on cockpit elements or for inspection in the press shop.

The requirements for the attachments are just as high as for the actual car body. The reflectCONTROL surface inspection system, familiar from car body inspection, has been adapted to the fast and high-resolution surface inspection of largely flat attachments. It recognizes and classifies the defects in an objective and repeatable way. Thanks to the large measuring field, trays can be measured in many cases in just a single capture.

Under remote control panes can be manoeuvred in up to 4 axes and set safely and easily in any height and position, even with an up to 300 kg load. Fitted with cable remote control.

Construction machines must be flexible in use. Whether in civil engineering, demolition, gardening and landscaping, recycling and waste management or in the forestry and timber industry: construction machines are used in a variety of ways to achieve high profitability and economic efficiency. KAUP offers a wide range of attachments for construction machines - almost every attachment can be combined with a wheel loader, skid steer loader, telescopic loader, wheeled excavator, crawler excavator or any other construction machine.

The here and now is electric. This is not exclusively true for cars and industrial trucks of various kinds. Even attachments for automated guided vehicle systems, forklift trucks or pedestrian stackers are now electrically powered. With the e-op series, KAUP has electrified the most important implement functions and its range includes Sideshifter, Fork Positioner, Rotator and Double Pallet Handler with electronic drives for a wide variety of material handling tasks.

The simple KAUP Crane Jib model T183G is designed with insertion pockets and fitted directly onto standard forklift truck forks and secured there. This attachment makes it possible to lift loads beyond the tips of the forks. This is the perfect choice when a Crane Jib is only used occasionally.

Push-pulls enable transportation of loads with inexpensive and place saving slip-sheets which are usually made of plastic or cardboard. This KAUP attachment makes expensive and unwieldy wooden pallets superfluous and optimal economical loading of overseas containers possible.

The KAUP Pallet Turnover Clamp T451W is an attachment designed with high visibility and suitable for all kinds of applications. It can be used to turn palletised and non-palletised goods or to exchange pallets e.g. from production pallets to transport pallets. It is also suitable for empting grid boxes or other transport containers.

The KAUP Rotating Fork Clamp T451 is an attachment designed with high visibility. Its solid, strengthened construction using 1000-fold proven basic components of the KAUP modular system gives numerous possibilities for heavy duty applications.

KAUP Appliance- and Carton Clamp T414B-1 are used world-wide for palletless transportation of white goods (fridges, washing machines etc.) and brown goods (electronic entertainment centres). For transportation of only one unit or up to 16 units: KAUP always has a suitable Appliance / Carton Clamp!

The KAUP Telescopic Appliance Clamp T413GT is used where white and brown product as well as other wide loading property is used. The slender clamp arms predestine this attachment for the truck and container loading.

The KAUP Appliance Clamp T413G is used for the transport of white and brown product as well as other wide loading property. Equipped with very slender arms this attachment is suited particularly for the truck and container loading.

KAUP attachments of the class T413 designed with high visibility are mainly used for in-plant, non-palletised transportation of bales of paper, waste paper, tobacco and textiles or also boxes and containers. Pulp, foamed plastic (polystyrene) wool and Big-Bags can also be transported with specially designed clamping arms.

The variously applicable Fork Clamp T411 is the base for all clamps of KAUP. Therefore, this attachment particularly suitable for hard use can be adapted very well to the individual demands. No matter, whether different hook-on fork cross sections for divergent charges, changed hook-on fork forms or the combination with other attachments: KAUP makes it possible.

The simple construction of KAUP Triple Pallet Handler T429B-1-2-3 with innovated visibility improved design ensures a clear view through and over the attachment to the fork tips and load. The practice orientated construction from T-profiles and C-profiles ensures highest stability and long operating hours with extended intervals between servicing and a minimum of required maintenance even in heavy duty operation. The excellent residual capacity compared to similar models increases the productivity of this Multi Pallet Handler even more.

The Double Pallet Handler range T429C set standards for Multi Pallet Handlers in lost load centre, residual capacity and visibility through and over the attachments to the fork tips and load. The practice orientated solid construction from T-profiles and C-profiles ensures highest stability and long operating hours with extended intervals between servicing and a minimum of required maintenance. At the same time the new Double Pallet Handler consumes 20% less energy.

The KAUP hook-on Fork Positioner T411Z is a robust attachment for exceptionally heavy duty operation - ideal for uneven surfaces. Spreading forces induced, for example when handling coils (several) cable drums, rolls or wire coils, can readily be supported due to the large overlap of sectional profiles between fork guide and clamp body. Speedy working cycles and millimetre accurate positioning of the transport load is possible.

The KAUP Fork Positioner T160 offers an excellent view to the fork tips and the load as well as a favourable lost load centre. Therefore the achievable residual capacity is very good. The qualities of this attachment are particularly effective when different sizes of loads are regularly transported or different kinds of transportation are used - for example in logistics.

Strong and durable visible pocket for hanging or inserting with pre-punched hole pattern for attaching to various load carriers using optional accessories Tear-resistant and stretchable transparent foil with restoring capacity scanner-compatibl — DIN A5 Landscape - 8.3" x 5.8" — DIN A4 1/3 hoch Portrait - 8.3" x 3.9" — DIN A4 hoch Portrait - 8.3" x 11.7" Individual fastening — self-adhesive, for flexible adhesion even on uneven surfaces, removable without leaving any residue, reusable on supporting surfaces thanks to multi-use properties — for magnetic attachment even on offset or round surfaces such as lattice boxes or drums, vibration and shock resistant on machines and during transportation thanks to the strong holding power of the high-performance neodymium magnet fastening accesories — Lattice Box Clip — Plastic Pin — Compatible Plastic Tie Material: Plastic PVC Color: yellow, red, blue, green

The vacuum packgaing machine AZ450ES from AIRZERO is working with a suction nozzle compared to vacuum chamber machines. The main advantages are Since only the bag and not the entire chamber is emptied, the process is faster. Lower gas consumption when gassing (only the bag is gassed and not the entire chamber). The gas is blown into the bag in a targeted and controlled manner. No limitation of the bag length by the chamber. Bar goods can therefore also be processed. Compact standalone device. double sealing (up/down) ejektorvakuum pump (air pressure required) gas flushing vacuum creation timer controlled, sensor controlled digital vakuum display 4 programms can be saved housing of stainless steel suitable for cleanroom

Highlights- All-round protection of functional components of the chain: attachments enclose the chain on three sides, even in the vicinity of the chain wheels • Gentle handling of delicate goods • Close-fitting covers prevent the risk of injuries and malfunctions • Outside of the chain is absolutely clean, so no accumulation of dust • Low level of friction in the event of intentional or accidental stoppage of goods conveyed • Drive chain remains clean, even under adverse operating conditions • Suitable for horizontal and vertical running • No lifting of the load in the vicinity of the chain wheels • Various drive chains available e.g. nickel-plated, maintenance-free or corrosion-proof • Different initial lubricant possibilities, depending on individual application

Stainless steel chains according to ISO 606 (DIN 8187) , chain types 06B-1 to 16B-2

iwis offers a wide range of roller chain products that fulfil the requirements of a variety of conveyor applications. We can supply virtually any special chain version – even the most difficult and complex design – for use in highly diverse application areas: corrosion-free, lube-free, maintenance-free and more.

Ground driven Shovel for the topdressing of artificial turf. SS1200 carries and topdresses infilling material on artificial turf. For spreading the infill, the shovel is lowered and the output amounts are adjusted by the sliding valve.

• easy to install clampin ring hub • elastomer attachment with conical clamping hub for small shaft diameters • plug in, blind assembly possible • backlash free, flexible, robust, oscillation dampening • Torque range: 2 - 2000 Nm • Shaft diameter: D1= 9 - 60 mm / D2= 6 - 100 mm

• with radial clamping hub on both sides • easy to install - plug in design • compensation of shaft misalignments - oscillation dampening • Torque range: 0,5 - 2.000 Nm • Shaft diameter: D1= 4 - 90 mm / D2= 5 - 100 mm

• with easy keyway connection • elastomer coupling with radial clamping hub, plug in design • backlash free, flexible, robust, oscillation dampening • Torque range: 2 - 2000 Nm • Shaft diameters: D1=8 - 90 mm / D2=6 - 90 mm