Results for
SPIROL
Germany
SPIROL's Series LP500 Latch Pins for Plastics are designed with a barb located under the head with a barb length equal to the width of the outermost section of the assembly. The remaining length of the LP500 Latch Pin is smooth without any other retention features. This allows the LP500 Latch Pin for Plastic to easily align and freely install through all of the holes with a plastic assembly until the barb makes contact with the final hole to securely lock the pin in place. Once fully installed, the handle will pivot freely around the non-barbed end of the stationary pin. The head prevents the LP500 Latch Pin from being over-installed, and enables the pin to be mechanically oriented for automatic installation. Manufactured from lightweight, lead free aluminium, SPIROL's LP500 Latch Pins for Plastics are available in three standard diameters: 3mm, 4mm and 5mm.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Silicone-free alternative for the lubrication of O-rings and sealings during assembly. Lubrication of plastic parts such as gears, sliding surfaces, etc. Advantages and benefits Excellent adhesion on plastics and metals Tasteless and odourless Consistent properties without drying out, hardening or bleeding NSF H1 registered Compatible with plastics (see table) MOSH/MOAH-free Silicone-free
Request for a quoteSPIROL
Germany
SPIROL offers robust, vertical installation machines specifically designed to post-mould install Compression Limiters into a variety of plastic assemblies. The machines can install a single Compression Limiter or multiple Compression Limiters simultaneously into various polymers, thermoplastics and thermosets. SPIROL’s Compression Limiter Installation Machines are versatile solutions designed to be retooled to accommodate changing part configurations. All designs incorporate standardized machine components to reduce factory lead time, improve component reliability, and lower component costs. SPIROL also specializes in application-specific fixtures to ensure that all assembly components are held accurately in place through the installation process.
Request for a quoteSPIROL
Germany
Some of SPIROL's standard Pin Installation Models can be equipped with a pusher punch (in place of a pin insertion quill) to press Threaded Inserts into plastic assemblies. The most appropriate Installation Machine depends on the actual insertion force required to press the Insert into the plastic hole and the desired productivity. Generally speaking, the Model PMH Heavy Duty Installation Machine is typically used for low to medium volume installation, and for medium to high volume installation, SPIROL's Model PH/PHX Platen-Style Installation Machines can be used for simultaneous installation of several Press-In Inserts at the same or different elevations. Due to the length to diameter ratio of Press -In Inserts, it is not possible to cost-effectively tube feed this type of Threaded Insert with SPIROL's automatic feeding and Installation machines.
Request for a quoteSPIROL
Germany
The course external thread of SPIROL's Self-Tapping Insert forms an internal thread within a molded or pre-drilled hole during the installation process into a plastic assembly. SPIROL Series 10 Self-Tapping Inserts are thread forming Inserts best suited for softer thermoplastics or thermosets. Self-Tapping Inserts provide the best pull-out resistance for a post-mold installed Insert, yet generally cost more than their post-mold counterparts. The external threads are designed with a thin profile to minimize induced stress in the plastic and have a relative coarse pitch to provide the maximum plastic shear surface to resist pull-out.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SPIROL
Germany
SPIROL's FH400 Headed Barbed Pin has a series of barbs extending down the entire length of the pin. Headed Barbed Pins are a great replacement for self-tapping screws in plastic assemblies as Barbed Pins are installed into standard moulded (or drilled) holes, they install much faster than screws, and they eliminate issues associated with cross-threaded or skewing during installation. Unlike screws that resist back-out (or loosening) by being tightened to a preset torque, Barbed Pins are retained by the plastic backfilling over the aggressively-designed barbs. The head provides a positive stop and is also used to retain a thin component to a thicker component within an assembly. SPIROL's FH400 Headed Barbed Pins are available in metric diameters ranging from Ø2mm to Ø6mm and inch diameters ranging from Ø.078" (5/64) to Ø.250" (1/4) in low carbon steel and austenitic stainless steel.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Sealant and lubricant for cold and hot-water valves in plumbing and heating sector, in vehicle heating systems or cooling circuits, ground seals on glass taps and desiccators For lubricating O-rings and rubber seals during assembly and operation, as well as plastic parts of all kinds Advantages and benefits Highly effective due to excellent adhesion on all materials Neutral behaviour with regard to plastics and elastomers Consistent properties without drying out, hardening or bleeding Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators Lubrication of O-rings and rubber seals for assembly and during operation Lubrication of plastic parts Advantages and benefits NSF H1 registered Tasteless and odourless Highly effective due to excellent adhesion on all materials Neutral behaviour with regard to plastics and elastomers Completely EPDM-compatible High long-term stability without drying out, hardening or bleeding Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol MOSH/MOAH-free
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
For the lubrication of machine parts under high mechanical loads Silicone-free alternative for the lubrication of O-rings and sealings during assembly For the lubrication of plastic/plastic and plastic/metal combinations, e.g. beverage can holders in the automotive industry Advantages and benefits High shear stability Excellent adhesion on plastics and metals Compatible with plastics (see table OKS 468) Constant properties without drying, hardening or bleeding NSF H1 registered Silicone-free MOSH/MOAH-free
Request for a quoteSYSKOMP GMBH - EMICO
Germany
Unique: One rivet for several sheet thicknesses. Quick and easy to assemble by hand. Made of a plastic material with lasting elasticity. Material: POM Colours: last digits 000 = white last digits 599 = black Further types on written request.
Request for a quoteFATH GMBH
Germany
Cable fixation, to secure cables to aluminum profiles different versions: Cable Binding Block univeral or with customized hammer Clip Cable Binder - 1 or 2 chambers, to fix cables without the need for cable ties, can be opened and closed again Cross Cable Binder Block, with / without Velcro (bracket), to secure cables to aluminum profilesin two directions Cross Cable Binder Block D28 for Tubular Frame Profiles, to fasten cables and tubes parallel to the slot Snap-Cable-Binding, to attach of cables securely and quick and without cable ties, with strain relief different assembly: — using a hammer head nut, screw, slot nut, etc. — with Hammer, can be mounted into the slot by a quarter turn — click-in assembly — clampable Material: PA plastic / glass fiber reinforced; Plastic PE; FPM 70; electrostatical discharging Color: black other sizes, other colors on request
Request for a quoteResults for
Assemblies of plastics - Import exportNumber of results
12 Products