Motor rotation - Import export

The output shaft of the HSH swivel motors has radial and axial hydrostatic bearings. Here, radially and axially arranged bearing pockets are supplied with pressurized oil via a separate pressure connection. As a result, the output shaft is centered radially and axially between liquid cushions and all metallic contact surfaces are permanently separated from each other by a thin liquid film. This eliminates wear caused by metallic friction in any operating state, even at zero speed compared to hydrodynamic plain bearings. In conjunction with highly dynamic control valves and angle of rotation sensors, these actuators are preferably used in controlled systems in which disturbance variables such as friction and the stick-slip effect must be reduced to a minimum. Furthermore, due to the lack of internal seals, they are ideal for test series with large numbers of load cycles where an interruption, e.g. due to the replacement of internal seals, is not permitted.

Coil Reels with loading capacity on both ends more productivity and shorter setup. While the one arbor is working, the other one takes a new coil. With four product series GSW basically covers any need in coil size, weight or width LH, the light DoubleEnded Coil Reel for up to 2 x 1 ton coil weight, with bevel gear expansion and manual rotation; LMHD, the light DoubleEnded Coil Reel of our mid series for up to 2 x 1,5 ton, with lever arm expansion and manual rotation; MHD, the medium DoubleEnded Coil Reel for up to 2 x 6 ton, with mechanical or hydraulic lever arm or key wedge expansion and manual or motorized rotation; SHD, the heavy DoubleEnded Coil Reel for up to 2 x 15 ton, with hydraulic key wedge expansion and motorized rotation. up to 2 x 15t coil weight and max 10mm material thickness max crosssection approx. 2000 x 5 mm max pulloff, decoiling or recoiling speed approx. 50 – 100 m/min

Motorized rotation Hydraulic wedge type expansion Highend arbor with double bearing Extremely stiff design SHDH Series PullOff Reel with manually adjustable brakes SHDR Series Payoff Reel with threephase motor Pneumatic or hydraulic hold down arms Electromotive or hydraulic traveling feature w optional automatic centering Hydraulic coil car and fullsize back plates Conical keeper rolls w optional motorized travel Larger mandrel heights and segments Vectorcontrolled drive systems for heavy coil weights Servo drive and control systems, etc.

Effortless 180° rotation via foot pedal and automatic mechanical locking Optional sensory position readout Crank Expansion via directionally stable joints, easily operable even under weight Highestquality Reel Arbor with maintenancefree bearing and minimal deflection Sturdy and warp resistant body in welded construction for highest stability MHD Series PullOff Reel with manually adjustable brakes MHDM Series Payoff Reel with threephase motors for start / stop operation MHDR Series Payoff Reel with threephase motors and frequency inverter for continuous operation Optional Equipment MHDSeries Pneumatic hold down arms Electropneumatic brake systems Larger mandrel segments Motorized rotation Traveling feature w optional automatic centering Different mandrel heights Various expansion ranges Different back plate sizes Loop control systems...etc.

AViTEQ Hopper impact vibrators/bin activators errect bunker walls by periodic oscillations in shock and so the friction between the bulk and bunker wall (caking). They are just for knocking out of forms, for shaking of chutes and downpipes, for better emptying of containers and bulk materials from adhering to solve, for example in filters. The most common activators are unbalanced motors and magnetic vibrators. For special and heavy demands, there are impact vibrators available. Advantages & benefits magnetic impact vibrators excite the bunker walls with aligned linear oscillations. They have no "run out" and respond immediately after switching; the vibrational intensity can be adjusted at the control unit unbalanced motors have a rotating direction of force, they put the bunker wall in uniform, universally effective vibration large vibratory force at small dimensions robust and undemanding Construction In certain cases, a single drive can already act as an activator. If there i

Thanks to a wide range of accessories, Hense operators can be individually configured for a wide variety of applications and optimally matched to the function of the overall system. To ensure perfect and safe operation, we are on hand to help you select and optimally coordinate all components.Servo valves, proportional valves and switching valves with different nominal sizes Pulsation damper for smoothing vibrations and uneven flow rates Subplates for positioning valves and pulsation accumulators close to the motor High-resolution rotation angle sensors that are coupled directly to the swivel motor shaft by means of a torsionally rigid coupling Pressure sensors Torque measuring shafts or reference torque measuring disks Clamping sets, shrink disks or profiled hubs for torque transmission Torsionally rigid couplings for reliable torque transmission with simultaneous shaft displacement Angled flanges for mounting the swivel motors parallel to the axis

UNT 6 and UNT 10 are reliable machines for the production of reusable hose assemblies, insertion of high pressure fittings or even to use with a skiving tool. Modell:UNT 6 Maximum Hex or hose diameter 0 40 mm (1,57") Maximum travel distance 0 500 mm (19,68") Industrial* 7-55 mm (0,02" - 2,16") Motor rotation (RNP) 101/207 Noise level (dBA) 70 L x W x H (mm) 1600x550x850 Weight 176.5 Kg

To meet the wide range of requirements in terms of mass moment of inertia, lead and payload, there is a comprehensive range of rotary acutators from the RCP2 and EleCylinder series with 24V stepper motor and the RCS2 series with 230 Vservo motor. RCP6 rotary grippers, which combine motorized rotating and gripping in one unit, complete the product range.

The RCP6 rotary chucks consolidate motorized rotation and gripping movement in a single unit. The rotating axis can perform multipoint positioning between 0 and 360° (one rotation). The rotational speed and acceleration/deceleration can also be set to any value. The chuck module is small and lightweight, as a solenoid gripper is used. Furthermore, the battery-less absolute encoder equipped means that home return is not required.

Generally, dosing pumps are referred to as oscillating displacement pumps with adjustable stroke length. Depending on the requirement the driving mechanism can be equipped with hydraulically actuated diaphragm. Electrically driven pumps offer besides the stroke length adjustment a further possibility to adjust the delivery flow by modifying the motor rotation speed. For a small delivery flow and a low delivery pressure, electromagnetically driven pumps are nowadays the devices of choice since they can simply be adapted to the process requirements by modifying the stroke frequency manually or through an external control (pulse or analog) signal.  Electromagnetic LMI pump. Flow rate: up to 76 l/h. Pressure: up to 20.7 bar For several years microprocessor-controlled dosing pumps with stepping motor are part of our portfolio. This pump model has a lot of possibilities and options for adjusting the delivery flow and monitoring the delivery rate. The driving mechanism offers additional

Current Controlled Torque System suitable for screw fastening work Easy fastening setting by controller Lowvoltage brushless motor ESD (electrostatic discharge) protection structure For both handheld / automatic machines Nine speed settings available Automatic three step speed control function Two types of measuring methods (Time/Motor rotation signal) Seven color indication LED (At the tip of the screwdriver) Two external I/O signal connection ports (NPN PNP switchable, RS232C) Controller has built in counting function Preventing human errors Various settings can be configured via a PC (Pree setting software available on NITTO KOHKi website here) More infomation available on NITTO KOHKI website here)

The Bumotec s191V is the combination of proven Swiss made mechanics and stateoftheart CNC control and drive technology. With the CNC Bumotec s191V mill / turn center, precise and complex components can be produced via 5axis machining. Thanks to its stable mechanical concept and its linear drive technology, accuracies of just a few microns can be achieved. The integration of an individually adaptable automatic workpiece change unit, allows the machine to be used for one off prototypes or to run so called «unmanned shifts» without personnel. Many different configurations are available with three to five axes of machining capacity. The thermal stabilization unit almost eliminates warmup cycles when starting or after machining interruptions. Features Linear driven motors and directdriven rotation axis High speed spindles (maximum 40,000 rpm) Smart combination of turning and 5axis machining High thermal stability Automatic tool changer for 90 HSK40 tools

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Gauge square design: 72x72mm, 96x96 mm or 144x144 mm Gauge round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

NORIMETER – 360° analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Monitoring for valid measuring signal. Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation. Fulfils all conventional ship classifications: ABS, BV, DNV-GL, LR, MED

NORIMETER – analogue indicator with stepping motor principle. Long lifetime due to compact and robust technology, a high protection class and a glass-fibre-reinforced, salt spray resistant plastic housing, suitable for outdoor areas. Individual scale design and corporate logos possible, even for small quantities. Square design: 72x72mm, 96x96 mm or 144x144 mm Round design: 60 mm, 80 mm, 100 mm or 130 mm (diameter) Other special functions (some as option): Monitoring total sensor failures, invalid sensor signal Wire-break monitoring of the sensor cable Short-circuit monitoring of the sensor cable Supply voltage failure monitoring (only on Live Zero units) Option: Additional signal LED (measurement value alarm, limit value monitoring) Option: Blinking pointer (measurement value alarm, limit value monitoring) Option: Minimum-Maximum value indication for saving and indicating the highest and lowest measured value. Option: Motor with anti-clockwise rotation.

Efficient mass finishing for the toughest requirements With a circular vibrator from our CB range, you get a mass finishing machine that works efficiently and achieves perfect processing results. The working channel is helically shaped and allows you to gently process your workpiece whilst ensuring high material abrasion. Gate clearing at the push of a button By pressing a button on the unit, you can quickly reverse the motor's direction of rotation before separating your workpieces from the abrasive media. This ensures that no workpieces or abrasive media are left on the gate that could get trapped between the separator flap and the working channel. Ideally suited for ball polishing and pressure deburring The CB circular vibrators stand out thanks to their robust steel construction and reinforced imbalance drive in the ball polishing configuration. This makes them ideal for ball polishing and pressure deburring with blasting medium.

Safe, simple, precise The new VibScanner 2 Ex is a nextgeneration, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues. This is the ultimate tool for fast and accurate machine vibration measurements. The VibScanner 2 Ex heightens efficiency and data quality. In just a quarter of the time of a standard datacollector, it precisely measures available data in three axes. Equipped with a triaxial sensor, it requires only one measurement point and the click of a button to begin collecting machine data. This device is ideal for routebased maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.

Belt width: 500-1400 mm Recommended speed: max. 3.0 m/s Motor power: 0.75 kW Rotational speed of brush: 145 RPM Brush material: polyurethane, steel, polypropylene, polyamide