Metals- special - Import export

Continuous-process shredding of large quantities and volumes: that’s the world of the ERDWICH two-shaft shredder. The secret of its success is our ERDWICH rotor-blade cutting principle, honed to perfection over decades. Want to know more? The material is taken up by the barbed blade, pulled unceremoniously into the machine and then shredded between the blades on the two opposing shafts. Whatever the material – e.g. special waste, WEEE, metal swarf, electrical waste or bulky items – even hard to shred, large-volume materials stand no chance against these two mighty cutter shafts. Perfect results are even guaranteed from fibrous, moist, heat-sensitive, elastic and rubbery materials. And, thanks to its mode of operation as a slow-speed piece of equipment, the ERDWICH two-shaft shredder also features quiet and largely dust-free operation. You can rely on the power and the technology of the ERDWICH two-shaft shredder. Continuous-process shredding of large quantities and volumes:...

The versatility and and capability of LAWECO products is most notably shown in coil processing systems. In the infeed and outfeed areas, coil lifting carriages primarily handle the coil. In conjunction with various rack systems even complete solutions can be realised. In the stack areas, stationary and movable scissor lift platforms provide the required handling. Here, it is also our goal to respond to the wishes and requirements of our customers and to provide individual solutions. Load bearing capacity up to 150 t Movable or stationary With simple, tandem or double scissor With materials handling technology or special constructions Mechanical coupling facility With powerful switching hydraulics or control valve technology With weighing device With positioning system

At TRADIUM, gold is available in the following shapes for industrial use: - Gold granules and (investment) bars - Gold in various organic and inorganic compounds Your point of contact for gold is: Philipp Goetzl-Mamba Phone: +49 (0)69 50 50 250 - 236 We are looking forward to hearing from you!

At TRADIUM, praseodymium is available in the following forms for industrial use: - Praseodymium metal - Praseodymium oxide Your point of contact for praseodymium is: Jan Giese Phone: +49 (0)69 50 50 250 - 237 We are looking forward to hearing from you!

At TRADIUM, bismuth metal is available in the following shapes for industrial supplies: - Bismuth granules, ingots, metal needles - Bismuth powder - Bismuth oxide Your point of contact for bismuth is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

At TRADIUM, rhenium metall is available in the following forms for industrial use: - Rhenium powder - Rhenium pellets - Ammonium perrhenate Your point of contact for rhenium is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

Design: Frame structure made of anodized special light-metal-profiles, without side panels. Tray support made of chrome nickel steel 18/10. Mounted on 4 corrosion protected,ball bearing castors with distance holding rolls, 2 of them lockable.

Novelis ff2 pre-painted aluminum with a 2 mm thickness is developed specially for building facade cladding in ventilated and non-ventilated construction. Coil-coated with high-quality PVdF paint, this pre-painted aluminum has a flawless, brilliant surface with a variety of plain, metallic and special colors available.

Cutlery- and tray-distribution trolley AGW. Design: Frame structure made of anodized special light metal-profiles, side walls melamine resin laminated, panels completely surrounded by U-profile, on top cutlery container with napkin dispenser for 300 napkins. Mounted on 4 corrosion protected, ball bearing castors, 2 of them lock able.

For trapezial trays. Design: Frame structure made of anodized special light-metal-profiles, side walls made of melamine resin laminated, completely bordered with U-profile. Tray supports made of angular plastic U-profile. Tray trolleys with 1 or 2 racks. Mounted on 4 corrosion protected, ball bearing castors with distance holding rolls, 2 of them lockable.

Design: Frame structure made of anodized special light metal-profiles, side walls and separating walls made of melamin resin laminated panels, completely surrounded by U-profile.Rear- and front side open. Tray supports made of chromium plated tubular material. Mounted on 4 corrosion protected, ball bearing castors with distance holding bumpers, 2 of them lockable. With acrylic glass doors (completely faced with melamine panels).

Spoiler for the M5000 tram in Manchester, UK Bombardier designed the M5000 tram as a highfloor tram specially for use in Manchester. The spoiler consists of a solid stainless steel frame with a gluedon GRP profile. The profile was milled on modern CNC machines at TC, glued to the frame, primed and painted with a special 2KPUR metallic paint. It is manufactured in different lengths and designs. It has fire protection in accordance with BS 6853. For new projects, we meet fire protection requirements in accordance with EN 45545.

Since 1934 working with elastomers, we have developed special know-how in development and manufacturing in the field of technical hose products. Hoses Hose systems Moulded articles Rubber-metal bonds Expansion joints Special Versions As individual components or as combinations. Here, our experts unleash their creative powers and problem-solving skills. The main features of these customer-specific versions are top quality and high degrees of innovation and individualisation, directly maximizing the benefits to the customer. The following pages give some insight into the wide range of technical hose products and possible solutions to problems. Please do not hesitate to contact our technical sales department for more information.

The KEIPER belt series RAPID conveyor and process belts is available in polyester, cotton or blended fabrics, with special coatings such as neoprene, silicone, non-woven fabric and many more, in a wide range of colors suitable for the specific application, and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approved and in conformity with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

Keiper’s series of UNITRANS conveyor and process belts is available in 1-/ 2- or 3-layered polyester fabrics, with a PVC coating or PVC interlayer, and in a variety of colors depending on the application and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approval and compliance with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

Keiper’s series of STABILOFLEX conveyor and process belts is available in 1-/ 2- or 3-layered polyester fabrics, with a PVC coating or PVC interlayer, and in a variety of colors depending on the application and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approval and compliance with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

Applications High-quality fluorinated materials like ETFE, PFA and the Thermoplast PE, are used by ChemResist. ETFE and PE are also available as electrically conducting versions. ChemResist ETFE is FDA- and EU-conform. This also applies to electrically conductive specifications. Partly and fully fluorinated polymers offer universal and permanent resistance to acids, alkalis, solvents and chlorides. ChemResist possesses an extremely smooth and anti-adhesive surface and thus prevents bacterial adherence or growth. In the manufacture of highly pure products (chip industry, high purity grade chemicals) ChemResist prevents impaired quality from foreign substances or dissolved metallic ions. If special parts are to be lined, ChemResist possesses distinct advantages both from an economic as well as a qualitative point of view. The process can be adapted flexibly to the circumstances or requirements (preparation of tooling is not required). Even rigid construction specifications can...

Applications High-quality fluorinated materials like ETFE, PFA and the Thermoplast PE, are used by ChemResist. ETFE and PE are also available as electrically conducting versions. ChemResist ETFE is FDA- and EU-conform. This also applies to electrically conductive specifications. Partly and fully fluorinated polymers offer universal and permanent resistance to acids, alkalis, solvents and chlorides. ChemResist possesses an extremely smooth and anti-adhesive surface and thus prevents bacterial adherence or growth. In the manufacture of highly pure products (chip industry, high purity grade chemicals) ChemResist prevents impaired quality from foreign substances or dissolved metallic ions. If special parts are to be lined, ChemResist possesses distinct advantages both from an economic as well as a qualitative point of view. The process can be adapted flexibly to the circumstances or requirements (preparation of tooling is not required). Even rigid construction specifications can...

The classic solution for many slip ring applications: At MACK you will find the right leg brush holder for your technical requirements. Without any doubts. Our tried and trusted holder model is available with one or two legs, with fixed or adjustable carbon brushes, in metal or – as a special version – in plastic. Together we can develop the individual version that meets your requirements. As with most MACK products: We do everything ourselves, and only in our own facilities – from the production of the main parts to the completion of all assembly work. This is how we can guarantee you maximum precision and process security.

The optoNCDT LL laser sensors produce an oval-shaped light spot of just a few millimeters in width which reminds of a short "laser line" (LL). This oval light spot compensates for inhomogeneous surface structures and the so-called "speckling" effect which particularly occurs with metallic surfaces. Combined with special software algorithms, interferences caused by surface roughness, defects, indentations or holes are filtered out. This enables stable and precise measurement results.

Frame structure made of anodized special light metal-profiles. 1 compartment, side walls made of melamine resin laminated panels. Tray supports made of chromium plated tubular material. Mounted on 4 corrosion protected, ball bearing castors with distance holding bumpers, diam. 125 mm, two of them lockable.

The overall harmonious effect of your metal products is maintained with Schmale clasps. Our clasps for metal boxes are specially designed for the fastening requirements of this type of packaging Our clasps and clasping systems are produced in various designs and ways of operating; they also offer a number of possibilities for customising and for different ways of fastening. Many models of clasps can be customised with either your or your customer‘s logo. A wide range of material and surface options are available Taking into account the material properties and wall thicknesses of your metal packaging, we offer you fastening machines which are specially designed for our clasping system and which ensure highly rationalised processing, optimising your production process. Should you have additional questions or special requirements please contact us » Clasps for fastening to metal The overall harmonious effect of your metal products is maintained with...

pressure equipment: valves, boiler systems, piping PED 2014/68/EU, AD 2000-W0, ASME/ASTM, CNIM, Alstom, MHPS nuclear power/ atomic energy and plant construction KTA3201.1, KTA1401, AVS D 100/50, Siemens, EDF/Areva/RCC-M naval architecture/ shipbuilding and offshore/ ocean engineering American Bureau of Shipping (ABS) Bureau Veritas (BV) Det Norske Veritas (DNV) Lloyds Register (LR) Nippon Kaiji Kyokai (ClassNK)

SCHOCK is your specialist in the production of cold-rolled profiles tailored to individual customer requirements. With a wide range of different technologies, we manufacture special profiles as customized functional elements up to complete assemblies. SCHOCK's roll forming technology operates economically and material-efficiently, offering significant advantages in product design: Unlimited range of shapes Highly precise functional dimensions Economical material utilization Energy-efficient manufacturing process SCHOCK special profiles are characterized by the highest precision and top-notch workmanship. With SCHOCK's roll forming technology, we produce profiles with extremely tight tolerances and excellent product properties. Thanks to creative tool solutions, we manufacture virtually burr-free profiles and process different materials with a tensile strength of up to 1000 MPa.

You can use this mesh sleeve to apply special adhesive when installing an anchorage device in a suspended ceiling or masonry with cavities. This metal mesh sleeve can be supplied with 3 different types of thread: M10, M16 and M22. Designed for suspended ceilings and masonry with cavities Available with 3 different types of thread: M10, M16 and M22

Thanks to its robust aluminium clamps, this stainless steel anchorage point can be attached to a metal seam roof with special profiles (KlipTec, Snapfalz etc.) without needing to penetrate the roof surface. The device can be flexibly attached to two seams spaced 300-660 mm apart. EN 795:2012, A + CEN/TS 16415:2017 Clamped onto two adjacent seams - completely penetration-free Seam intervals: 300 - 450 mm / 420 - 660 mm Sheet thickness ≥ 0.75mm e.g. KlipTec, Snapfalz or similar Incl. installation set We also supply a protruding model for use in a lifeline system

Earthing Clear tasks relating to earthing arise from relevant norms and regulations: DIN VDE 0101: 9.3.4 Measuring for earthing of operating media and systems All exposed metal parts of electrical operating media which are not part of the operational power circuit (structures), which are part of the electrical network must be earthed.Insulated areas should be created in special cases. All metal parts which are not part of electrical operating media should be earthed, provided this is appropriate (e.g. due to accidental arcing, capacitive and inductive coupling). Betonbau generally realises this task through discretely-structured visible connections between the HPAS of the building and active plant components. This offers you the advantage of high process reliability and contributed to overall comprehension and verifiability for everyone. Reinforced concrete also offers enormous advantages in itself with regard to equipotential bonding and integration in earthing current circuits.