Results for
GSW SCHWABE AG
Germany
A perfect combination of space savings and dynamics: the GSW Compact Feed Lines Our Compact Feed Lines are an ideal answer to the challenge of a constraint floor and necessity to process thick materials. Marrying the processes of leveling and indexing into one Feeder-Straightener machine allows for a complete Feed Line with only two individual machines and thus greatly reduces the necessary length. Additionally, the decoupling of the coil mass from the indexing process – achieved through a short loop between Coil Reel and Feeder-Straightener – enables dynamic feeding despite the compact footprint. And, if cross-sections are especially big, the loop can be spared completely, creating yet more space. One more advantage, virtually a by-product out of their very nature, is the quicker set-up of our Compact Feed Lines. This elevates them to not only space- but also time-savers!
Request for a quoteGSW SCHWABE AG
Germany
With Conventional Feed Lines, the focus lies on speed and material surface. That’s why Conventional Feed Lines are equipped with a Coil Reel for pull-off, a Straightener with variable frequency drive a coil loop and a Servo Roll Feed: the loop uncouples the more inert straightening process from the highly dynamic indexing process and thus allows for high line speeds and preservation of the material surface. Since productivity and capacity demands can vary significantly, we have created different control concepts: while small Feed Lines work with a simple pneumatic drag brake at the Coil Reel and an ultrasonic sensor to control the Straightener speed, the large Feed Lines get fully synchronized controls with motor-limited Coil Reels and a smart loop, creating a steady average speed of the whole line. This allows smooth pull-off of high coil weights while the loop remains very calm – in addition, the Servo Roll Feed can work with full dynamics, even at long indexing progressions.
Request for a quoteGSW SCHWABE AG
Germany
Most Winding Lines process one single coil (single-layer winding). There are however also applications where multiple layers are wound: With this process, the rewinding Coil Reel (Rewinder for short) reverses horizontally and orderly puts one layer beside the other, creating one long coil. This will make sense when narrow slit coil materials of small weight and – depending on their thickness – usually short running lengths would require frequent changeovers. Here, a layer-wound coil provides much longer productive time. The “elongation” by the way is done by butt-welding the coil strip ends. We offer this complete technology – including our own end-joining equipment and an adapted servo layering axis for the Rewinder. For thick strips we build vertical straighteners to correct the frequently occurring camber defect.
Request for a quoteGSW SCHWABE AG
Germany
When you deal with industrial surface treatment and your expertise is the cleaning, brushing, polishing or coating of strip steel, you most likely do not want to spend any worries about the run of the material. That’s where our Winding Lines keep your worries away – because they take care of a safe run! They work with high tension and special monitoring and deflectors to do this, with the result of a clean wound beginning to end. The machine design thus calls for especially high drive power and precision expansion systems; even something so simple as the machine base is designed special to cope with the forces… To control the precision of one layer to the next, we utilize external edge controls and servo-drive the Reels for adjustment. This way we meet the typical low tolerances in this industry – after all, the coil is the product!
Request for a quoteCNC-STEP GMBH & CO. KG
Germany
The CNC milling machine for all upcoming tasks. Fast, precise and inexpensive. Including CNC control and 2D and 3D CAD/CAM ConstruCAM-3D software. Free lifelong LIVE Support ! CE-compliant commission only with protective housing and the suction socket.
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
ECKOLD MF 500 - Allrounder-machine with multiple functions to fabricate sheet metal: planishing, wheeling and shrinking The ECKOLD MultiFormer MF 500 combines three machines in one multi-function unit. The MF 500 is able to planish, wheel and shrink sheet metal and is therefore a highly attractive and affordable option for vintage car restorers, technical colleges and artists. All forming tasks can be completed in a single C-frame, using separate modules for planishing, wheeling and shrinking. The MultiFormer MF 500 can also be combined with the tried and tested planishing hammer GL 2 and/or the Handformer HF 100. This Multiformer MF 500 EW consists of: English wheeling machine MF 500 Optionally available with a Handformer HF 100 for shrinking and/or a planishing hammer GL 2 (not included in this offer). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Order now!
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
ECKOLD MF 500 - Allrounder-machine with multiple functions to fabricate sheet metal: planishing, wheeling and shrinking The ECKOLD MultiFormer MF 500 combines three machines in one multi-function unit. The MF 500 is able to planish, wheel and shrink sheet metal and is therefore a highly attractive and affordable option for vintage car restorers, technical colleges and artists. All forming tasks can be completed in a single C-frame, using separate modules for planishing, wheeling and shrinking. The MultiFormer MF 500 can also be combined with the Handformer HF 100. This Multiformer MF 500 GL 2 consists of: English wheeling machine MF 500 + planishing hammer GL 2 Optionally available with a Handformer HF 100 for shrinking (not included in this offer). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Order now!
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
ECKOLD Handformer HF 100 PA for stretching, shrinking, notching, hole punching, edging and clinching. When working with the HF 100 PA, you can use both hands to hold and guide your workpiece, while the precision strokes are triggered with a foot pedal. The Handformer HF 100 PA is therefore the ideal device for the forming of large, unwieldy workpieces. The machine is pneumatically driven and features a pressure control device to prevent tool overload. Each machining process is actuated by pressing the foot switch, whereby the stroke force is proportional to the force applied to the pedal. • Adjustable working height • Quick tool change • Tool storage trays • Stop for precision guidance of workpieces For our Handformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Contact us for a customised offer, tools included!
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
Machine with multiple functions to fabricate sheet metal: planishing, wheeling and shrinking The ECKOLD MultiFormer MF 500 combines three machines in one multi-function unit. The MF 500 is able to planish, wheel and shrink sheet metal and is therefore a highly attractive and affordable option for vintage car restorers, technical colleges and artists. All forming tasks can be completed in a single C-frame, using separate modules for planishing, wheeling and shrinking. The MultiFormer MF 500 can also be combined with the tried and tested planishing hammer GL 2. This Multiformer MF 500 MAX consists of: English wheeling machine MF 500 + Handformer HF 100 for shrinking For our Handformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Optionally available with a planishing hammer GL 2 (not included in this offer). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Order now!
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
Universal forming machine for stretching, shrinking, reforming, curving, planishing, flattening, doming and straightening. The many special features of the Kraftformer KF 675 Magnum include stroke speed preselection and stored machining programmes for reproducible results. The Kraftformer KF 675 Magnum is capable of machining large steel components with a sheet thickness of up to 6 mm. A single Kraftformer is all you need to bend profiles, form sheet metal, produce new parts, and repair or rework workpieces with high precision. For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). • Preselection of stroke speed • Adjustable return position • Stores up to 25 user-defined machining programmes • Reproducible results • Tool check • Electronic fault diagnosis • Servo motor-driven machine Max. forming capacity Steel 400 N/mm²: 6.0 mm Aluminium 250 N/mm²: 6.0 mm Inox 600 N/mm²: 4.0 mm
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
ECKOLD Handformer HF 100 for stretching, shrinking, notching, hole punching, edging and clinching. The HF 100 makes forming easy, as it does away with time-consuming hammer beating. The HF 100 is able to stretch and shrink sheet metal and profiles up to 1.5 mm (steel) or 2.0 mm (Aluminium) in thickness. The Handformer is a stationary machine with a throat depth of up to 100 mm, and is mainly used in trade workshops. Apart from standard forming tools, ECKOLD offers tool inserts for notching, hole punching and edging as well as for clinching. • Adjustable working height • Quick tool change • Tool storage trays • Stop for precision guidance of workpieces • Also available with PA 80 pneumatic drive unit For our Handformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Contact us for a customised offer, tools included!
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
ECKOLD Kraftformer KF 170 PD - Universal forming machine for stretching, shrinking, reforming, curving, planishing, flattening, doming, straightening, punching, notching and clinching. The Kraftformer KF 170 PD with pneumatic drive is the most compact of all ECKOLD Kraftformers. The machine is designed for single or continuous stroke operation for forming steel sheets with a thickness of up to 2 mm. Operated in single stroke mode, the KF 170 PD is the ideal machine for reworking and adjusting tasks. It can be used for punching, notching and clinching. In continuous mode, the KF 170 PD allows for fast and easy forming. In single stroke mode, it caters for precision hole punching, clinching and reworking! For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 2.0 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.5 mm Contact us for a customised offer, tools included!
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
ECKOLD Kraftformer KF 324 - Universal forming machine for stretching, shrinking, reforming, curving, planishing, flattening, doming and straightening. The cult-classic among the Eckold machines, the ECKOLD Kraftformer KF 324, is the cheapest motor-driven machine of the Kraftformer series. It is also known as ECKOLD Piccolo and has been designed for a long service life. Metal workers all over the world are delighted with this machine, as it works perfectly for many decades. With the ECKOLD Kraftformer KF 324, the press force is controlled by means of a hand wheel. This model is designed for the forming of steel sheets up to 2 mm in thickness. For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 2.0 mm Aluminium 250 N/mm²: 2.5 mm Inox 600 N/mm²: 1.5 mm Contact us for a customised offer, tools included!
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
ECKOLD Kraftformer KF 800 - Forming machine for stretching, shrinking, planishing and doming. With its huge horizontal throat of 800 mm, the Kraftformer KF 800 allows new possibilities to fabricate large-scale sheet metal parts. The machine is air driven and released by a foot pedal, either in single or continuous stroke mode. The single stroke function combined with the big throat is especially useful for correction jobs. Depending on the need of forming force, the machine has two stroke settings. A digital display shows the ram position with a 0.1 mm precision which results in a high repeatability of the forming force. The machine is adjustable in height. For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 2.0 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.5 mm Contact us for a customised offer, tools included!
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
MF 800 - A complete workshop in one machine. The MF 800 MultiFormer is the ingenious multi-functional machine for stretching, planishing, driving and shrinking of metal sheets. This sophisticated wheeling machine is ideal for working on medium to large size work pieces: such as motorbike tanks, fenders, hoods, bonnets, door panels, etc. The compact machine comes fully equipped with castors so that it can be moved to any location in the workshop. • Large tool shelves • Wheels and wheel supports rotatable by 90° • Roller angle adjustable • Large selection of optional accessories • Quick tool change This Multiformer MF 800 KIT 1 consists of: English wheeling machine MF 800 Optionally available with a Handformer HF 100 for shrinking and/or a planishing hammer GL 2 (not included in this offer). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 3.0 mm Inox 600 N/mm²: 1.0 mm Order now!
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
Forming machine for stretching, shrinking, reforming, curving, planishing, flattening, doming and straightening. The electronic display of the control system visualizes operations, fault tracing and indicated maintenance rates which ensure an optimum machine utilization. Storable processing programs allow repeatable results. This Kraftformer model is particularly recommended for the forming of sheet metal in the industrial metal construction sector as it is capable of machining large steel components with a sheet thickness of up to 3 mm. For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). • choice of two preselectable stroke speeds • adjustable reverse position • 4 storable processing programs • repeatable results • electronic display/fault tracing Max. forming capacity Steel 400 N/mm²: 3.0 mm Aluminium 250 N/mm²: 4.0 mm Inox 600 N/mm²: 2.0 mm Contact us for a customised offer, tools included!
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
Universal forming machine for stretching, shrinking, reforming, curving, planishing, flattening, doming and straightening. The ECKOLD Kraftformer KF 340 is part of the medium-force Kraftformer range with motor drive. Depending on the workpiece to be machined, the operator can adjust the number of working strokes to any value between 220 and 600 strokes per minute continuously. Low speeds are particularly suitable for shrinking, stretching and for straightening and precision finishing. Thanks to the high stroke rate, the machine is also widely used for doming (dishing) and planishing, boosting productivity. This Kraftformer is capable of machining steel sheets of up to 3 mm in thickness! For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 3.0 mm Aluminium 250 N/mm²: 4.0 mm Inox 600 N/mm²: 2.0 mm Contact us for a customised offer, tools included!
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
STARRAG GMBH
Germany
The RVU grinding machines set new standards in highprecision machining and are especially suitable for high precision grinding applications in the bearing and aerospace industries. The range can be equipped with up to four watercooled grinding spindles which can achieve a performance of 45 kW at 18,000 rev/min. (according to the type of grinding wheel selected) The RVU facilitates a complete machining processing without interruption as optional dressing units, grinding wheel changers and workpiece measurement are available. Additional options for hard metal machining boring and workpiece measurement increase the possible applications of the machine series considerably.
Request for a quoteResults for
Metal slotting machines - Import exportNumber of results
19 ProductsCountries
Company type