Metal in - Import export

precise coating of flat parts

With the Alumero lightweight elevation, you can increase the module inclination by 5 – 7° (depending on the arrangement of the module) with trapezoidal sheet metal roofing. With only a slight roof pitch, this can noticeably increase the yield and the self-cleaning effect of the modules. The increased installation results in larger row spacing. The lightweight trapezoidal sheet elevation is based on a stronger version of the proven Alumero trapezoidal sheet metal rail with a length of 400 mm.

Metal Bellows Coupling axial pluggable Backlash-free metal bellows coupling as axial pluggable execution Easy assembly / disassembly by simply plugging / pulling the coupling parts High tensile aluminum and special coatings ensure a durable solution at low mass / inertia For shaft diameters from 10 – 70 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Perfect bellows coupling for servo drives, e.g. in testing equipment, automation techniques, packing machines Torque range: 18 – 500 Nm

Metal Bellows Coupling with collet clamps Backlash-free metal bellows coupling with clamp hubs Hub material: up to 60Nm – aluminum, up from 80Nm - steel For shaft diameters from 10 – 80 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Easy to assemble Perfect bellows coupling for connecting servo motors, e.g. in machine tools, automation techniques, packing machines, wood working machines Torque range: 18 – 1400 Nm

Metal Bellows Coupling with split hubs Backlash-free metal bellows coupling with compact split hubs For shaft diameters from 10 – 70 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Radial assembly! Due to the split hub design shafts can be mounted and adjusted before the assembly of the coupling Leightweight ~ space saving ~ fast assembly / disassembly Torque range: 18 – 500 Nm

Miniature Metal Bellows Coupling with set screws Backlash-free miniature metal bellows coupling with radial set screws For shaft diameters from 1 – 24 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Very cost-effective design Perfect bellows coupling for encoders, tachometers, potentiometers Torque range: 0,05 – 10 Nm

Miniature Metal Bellows Coupling axial pluggable Backlash-free miniature metal bellows coupling with radial set screws For shaft diameters from 3 – 25 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Axial pluggable design Perfect bellows coupling for encoders, tachometers, potentiometers Torque range: 0,5 – 10 Nm

Miniature Metal Bellows Coupling with collet clamps Backlash-free miniature metal bellows coupling with clamp hubs For shaft diameters from 1 – 25mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Easy assembly with friction-locked clamp hubs Perfect bellows coupling for encoders, tachometers, potentiometers, servo drives, NC axis, stepper motors Torque range: 0,1 – 10Nm

Miniature Metal Bellows Coupling with split hubs Backlash-free miniature metal bellows coupling with split hubs For shaft diameters from 3 – 25 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Radial assembly! Due to the split hub design shafts can be mounted and adjusted before the assembly of the coupling Perfect bellows coupling for servo drives, e.g. in testing equipment, automation techniques, packing machines, Torque range: 0,5 – 10 Nm

Miniature Metal Bellows Coupling axial pluggable, with collet clamps Backlash-free miniature metal bellows coupling with clamp hubs For shaft diameter from 3 – 25 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Easy assembly with friction-locked clamp hubs Perfect bellows coupling for encoders, tachometers, potentiometers, servo drives, NC axis, stepper motors Torque range: 0,5 – 10 Nm Axial pluggable

Metal Bellows Coupling with collet clamps / Hub material: aluminum Backlash-free metal bellows coupling with clamp hubs Hub material: aluminum Alternatively to steel executions we recommend our series KB4AL from size 80 - 500 For shaft diameters from 10 – 70 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Easy assembly and low inertia Perfect bellows coupling for connecting servo motors, e.g. in machine tools, automation techniques, packing machines, wood working machines Torque range: 18 – 500 Nm

Metal Bellows Coupling with collet clamps, compact Backlash-free metal bellows coupling with compact clamp hubs For shaft diameters from 10 – 70 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Perfect bellows coupling for connecting servo motors, e.g. in machine tools, automation techniques, packing machines, wood working machines Torque range: 18 – 1400 Nm

Metal Bellows Coupling with split hubs Backlash-free metal bellows coupling with split hubs For shaft diameters from 10 – 80 mm High torsional stiffness, compensation of shaft misalignment at low restoring forces Radial assembly! Due to the split hub design shafts can be mounted and adjusted before the assembly of the coupling Perfect bellows coupling for servo drives, e.g. in testing equipment, automation techniques, packing machines Torque range: 18 – 1400 Nm

The GEMÜ 707 2-piece 2/2-way metal ball valve is manually operated. It has a plastic sleeved lockable hand lever. The seat is made of PTFE. — High flow rates — Low weight — Non-twisting lever — Lockable hand lever — Nominal sizes: DN 8 to 50 — Operating pressure: to 68 bar depending on version and/or operating parameters

The GEMÜ 656 2/2-way diaphragm valve has a low maintenance metal membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. The valve body has a full bore design. —High mechanical stability —High flow rate due to straight through flow —Optional flow direction —Valve can be cleaned without disassembly of operator

GEMÜ 481 Victoria® soft seated butterfly valve has a metal actuator and is pneumatically operated. The butterfly valve is available in nominal sizes DN 25 - 600 and in various body versions such as Wafer, Lug and U section. — Approvals: Drinking water (DVGW, ACS, WRAS, Belgaqua), gas (DVGW) — Low torques — Simple installation — Modular construction — Extensive applications using a variety of materials — Advanced seal design - even for larger diameters — Body coating in accordance with ISO 12944-6 C5-M — Suitable for coastal and offshore areas as well as in buildings with high condensation problems and contamination

The GEMÜ 428 butterfly valve has a low maintenance motorized quarter turn actuator. A manual override and an optical position indicator are integrated as standard. — Low weight — ATEX version available as an option — Various seal materials available

The VMS automatic machines are designed for the ultimate handling simplicity - both for series cuts and in manual operation. The machine operation takes place using a convenient NC control. Where your operations call for frequently changing single cuts, an optional bar start detection system makes for even simpler material handling through fully automatic length positioning without the need for manual intervention. The generously dimensioned casing complies with the latest safety requirements and can be fully opened for improved access. — Material feed with flat guide and ball screw spindle for high-precision positioning — Large-dimensioned cover hoods meet highest safety standards — Easy to operate in automatic and manual operating mode — Can be combined with roller conveyors — 4 speeds as standard for machining almost any steel quality — Both coolant and micro spray system standard

This Behringer's semi-automatic straight-cutting bandsaws combine the high-cutting output and simple handling which are utilized for economical processing of low piece numbers and one-off cuts. They feature easy handling that are precised in isolating the easy and difficult cuts. These machines are suitable in cutting pipes and all the materials which contain difficult machining properties and they can also provide semi-automatic variants that are recommended for the accurate positioning of a longer cut piece.

Semi-automatic machines for single cuts and small seriesWith automatic saw feed and quick-clamping device for the material, the semi-automatic models offer higher cutting output levels and more operating convenience than the manual saw variants. By ensuring fatigue-free working for the operator, they are also suitable for sawing small production runs: Quick-acting pneumatic / hydraulic clamping device Clamping pressure reduction available as option Variable hydro-pneumatically / hydraulically controlled setting of the saw blade feed Easy miter cutting positioning with fixed stop Easy stroke adjustment of the saw unit via 2 clamping levers Well dimensioned worm gear unit with EISELE shock-absorbing feature Quick and easy blade change

Craemer is a specialist for constructing and manufacturing complex metal components and a well-known international supplier for the automotive, commercial vehicle, large domestic appliance and heating industries. The sheet metal components are sold to leading car producers, such as BMW, Mercedes Benz, GM, Volkswagen and Audi. Miele and other world brands are being supplied with white goods. The Craemer Group is one of the leading European manufacturers in the high volume serial production of car-modules, particularly components for seating structure and seatbelts. We process: sheet steel, high-strength sheet steel, high-grade steel and aluminium sheet Manufacturing process: hydraulic and mechanical presses with progressive die, transfer and servo direct technology as well as modern facilities for assembly production. Press capacity of between 3,150 and 25,000 kilonewton at a maximum table-length of 8,000 millimeters

This part is use for printer accessories,after CNC Milling,processing black anodize.

All around eciency is provided by the use of pre-assembled fastening systems; fewer part types, lessened assembly costs, and mimimized supplier base are just a few of the many reasons the trend is in pre-fabricated components. Depending on the application, manufacturers can use dierent materials and take advantage of detachable or permanent captive fastening systems. Features and benefits : -Assembly costs and times are reduced -Mimimized part diversity -High level of assembly reliability -Decreased efforts in assembly -Eliminate lost parts -High load capacity -Integrated tolerance compensation -Minimized supplier base for effectiveprocurement and decreased logistic costs -Removal of thread-cutting and self-tappingscrew combinations -Omission of incorrect product usageand assembly errors -Effortless disassembly and reassembly Advantages : -RELIABILITY OF ASSEMBLY -INTEGRATED TOLERANCE COMPENSATION -ALLOWANCE OF COMPACT DESIGNS - HIGH LOAD CAPACITY

PRODUCTION CAPABILITIES KEBA Fastenings’ processing capacity for Turned-Parts comprised of steel, brass, aluminum, and stainless steel bars ranges between Ø 1mm to Ø 60mm via CNC Auto Lathe, Index, and Sliding Automat machinery. The manufacturing technology and team capabilities allow for custom made parts according to customer-specific drawings. SURFACE TREATMENT • Browning • Anodised • KTL • Zinc - Lamella • Galvanized (blue, yellow, black) • Zinc - Iron • Zinc - Nickle Powder • Phosphating • Chrome • Copper

K-TITE high-performance thread rolling fasteners are specially designed to lower your in-place fastening costs. K-TITE fasteners form internal threads into plain holes in ductile materials upon initial installation, which: • Eliminates the need to pre-tap the nut member • Reduces problems associated with assembling screws and bolts into pre-tapped holes, such as cross-threading

• Compatible with machine screw threads • Provides a high joint strength • Low loss of preload force under high dynamic and thermal loading • Effortless lead-in with low insertion torque for safe assembly • Excellent self-locking vibration resistance • High stripping torque • Allows for a reduction in installation depth

Hinges for fastening to metal The high mechanical load limits of our hinges stabilise your metal products and in this metal combination form a harmonious overall image. A number of designs and ways of working as well and a wide range of materials and surface options enable you to find a perfect match for your cardboard packaging styles. Together Schmale hinges and clasps give your product a harmonious overall image. Taking into consideration the material properties and wall thicknesses of your packaging, our hinges and hinge systems offer you various fastening options, according to your requirements, and a highly efficient and economical way of fastening hinges using fastening machines specially designed for our hinge systems. Single hinges for nailing or screwing are recommended for smaller quantities. Should you have additional questions or special requirements please contact us » Hinges for fastening to metal The high mechanical load limits of our hinges stabilise your...

TRADIUM is registered as a REACH distributor (Registration, Evaluation, Authorisation and Restriction of CHemicals) for gallium. At TRADIUM, gallium is available in the following forms for industrial use: - Gallium metal - Gallium oxide - Gallium chloride - Gallium nitrate - Alloys on request Your point of contact for gallium is: Matthias Rüth Phone: +49 (0)69 50 50 250 - 250 We are looking forward to hearing from you!

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit