Metal casting - Import export

NKCG produces Isostatic graphite (CIP) dies for continuous casting of cast iron, copper alloy and precious metals. Based on the casting process and metal type, several CIP grades are available to optimize cost/benefit for the specific application.

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

Below are a few reference objects that we have been able to work on as part of a wide variety of project tasks in recent years: Audi: all RS models since 2000, R8, R8 2015 Bentley: Mulsanne, Bentayga BMW/Mini: Clubman, 3 series Ferrari: 599 GTO Lamborghini: Gallardo, Murcielago, Aventador Mercedes: S-Class, SLS, Actros Porsche: 997, 911 I panel, door trim, center console, greenhouse, interior trim, trim, steering wheel, seats, carpet trim, infotainment system, instrument cluster, mirror, selector lever, switch panel, trunk, engine compartment cover. Wheels, brakes, wheel suspension, exhaust system, engine components, tank, lines. Plastic injection moulding, metal casting, forging, forming, tube processing, painting, galvanic surfaces, lamination, leather covering, upholstery and sewing.

We use state-of-the-art machines to produce high-quality molded parts in the area of PU casting technology. By varying the raw materials, formulations and manufacturing processes, the properties can be specifically influenced. Therefore, we can produce difficult geometries and also larger components with the excellent properties of a polyurethane. In casting technology, small and large quantities can be produced cost-effectively using simple molds. Firm bonding with other materials (steel, aluminum, cast iron metals, etc.) is also possible.

Features • Without pre-drilling in gypsum plasterboard • Screw in directly • No special tool required • In gypsum fibreboards high holding values up to 20 kg per fixing point • Also suitable for M4 screws Description & Area of Application • Metal wall plug (zinc die-cast) with drill tip and pronounced external thread • Also suitable for double-layer gypsum plasterboard • PH2 driver for easy installation • Spiral Plus + Screw: Screw with PH2 driver

Together with the Fachhochschule Münster – University of Applied Sciences we are working on ALWA PERM (patent No. 2583995). This is a metal-filled casting resin for producing a porous, resin-bound mould. These materials are applicable in the areas of thermoforming, the ceramic industry, intake moulds and devices, pneumatic cushioning, the filter industry, etc. ALWA PERM allows a castable production of porous metallic materials with a binder for the first time. The system offers a highly accurate mould surface reproduction. The profile characteristics goes far beyond the current state of the art. NO MORE DRILLING OF VACUUM HOLES! NO DAMAGE OF THE MOULD SURFACE DUE TO DRILLING HOLES

A wide variety of very individual construction options are made possible with Vulkollan® coated components. Connections between Vulkollan® and metal can be easily created after the metal component has been pretreated. During this pretreatment, the surface of the component is cleaned and degreased using a sandblasting process. An optimal bond is then guaranteed by applying an adhesion promoter. The metal component (e.g. steel, aluminum, cast) takes on the function of the stable supporting body. The Vulkollan® coating meets high-performance requirements in terms of wear protection, damping and noise reduction. We would be pleased to advise you on which metal compounds can be used in your processing, in order to achieve top process results. Please note, other trim types are available upon request!

Through the process of briquetting, the value of residual metals can be increased considerably. The value of residual metals can be increased considerably. A further advantage is the recovery of expensive cutting fluids that can be pressed out of wet chips and then reused. When melting briquettes, combustion is significantly lower and results in a higher melting yield than with loose chips. Depending on the need, our briquette systems are equipped with hydraulic motors between 4 and 90 kW. They will achieve a specific pressure of up to 5,000 kg/cm². Suitable for aluminium, steel, cast iron, copper and many other metals Advantages: - Heavy reduction of volume, reducing storage and transportation costs - Recycling of expensive cooling lubricants - Recipients often pay a better price for loose millings - Minimal burn-off and increased glaze recovery thereby For throughput rates between 30 and 4,800 kg/hr.

Series V 600 - 1100 IS The HEINKEL Vertical De-oiling Centrifuge V 600 – 1100 IS is designed and built for the separation of cutting fluids and coolants from steel, cast and metal chips. Special properties for the customer’s benefit: Recovery of liquids and oil from chips produced by processing centres and from plastic pellets Simple and rugged design

Impregnation systems to close micropores in metal castings as well as in copper, aluminium or magnesium alloy castings. The parts to be impregnated are fixed in baskets. The latter are transported by a special crane system as well as with reservoir roller conveyors. Excess material is removed by centrifuging of the baskets. The impregnating agent remaining in the pores in fluid form is hardened by heating in a hot water bath. The process sequence runs fully automatically under a microprocessor control.

EXCOR PERIGOL VCI 230 is used to provide corrosion protection for ferrous metals, steel, cast iron, copper and aluminium alloys as well as fully or partially galvanised steel. Solvent-free PERIGOL VCI 230 contains vaporising corrosion inhibitors and may be applied via immersion, spraying or brushing. This product has been specially developed for the protection of metallic cavities. Thanks to the VCI it contains, coating the floor of a case suffices to protect the inner walls from corrosion. PERIGOL VCI 230 is compatible with a wide variety of engine and gear oils, meaning as a rule it does not have to be removed after shipment. In direct contact with metal surfaces PERIGOL VCI 230 forms an oily, non-wipeproof film on the metal surfaces which may be removed using aqueous alkaline media.

• from die-cast metal with high quality chrome-plating • for scooping out equal-sized portions of icecream • comfort-soft-touch handle

Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ZINC INGOT Usage: Mainly used for die-casting alloy battery industry Pharmaceutical / rubber industry Chemical industries zinc and other metal alloy plating coating industry in applied widely. Factory with strong supply ability silver white lustrous metal zinc ingot for die-casting alloy battery industry 1. mainly used for melting ingot 2. discontinuous melting with scrap 3. Used for industry such as automobile,pinning and weaving,electron broadly and so on

Technical information: PCD, CBN and diamond coated milling cutters are best used for the machining of non-ferrous metals, cast materials and special materials. Polycrystalline diamond (PCB) is a synthetic, extremely hard composite mass of diamond particles randomly oriented in a metal matrix. It is manufactured under high pressure and temperatures from selected diamond particles. Because of its fundamental hardness, CBN makes it possible to machine steels with hardnesses up to 70 HRC. The ability of CBN to withstand high speeds and feed rates, along with its good tool life, stable inserts and a precision milling machine guarantee unequalled process reliability, performance and cost effectiveness.

Digital Optical Audio Cable Nylon Braided Fiber, Slim Metal Case, Gold Plated Plug, VENTION 6.6 ft Toslink Fiber Optic Audio Cable for Sound Bar TV PS4 Samsung Vizio Bose LG