Medical industry - Import export

These are the accessories made by aluminum, which used in many fields ,such as industrial, medical equipment and other industries.

costumer tailored high quality bags and sacks: # regular confirmation of our GMP at customer audits # Close cooperation between our QS and well-known raw material suppliers # corresponding approvals (Pharm. Eur., DMF, USP) References: Sanofi, GSK, BAYER, BOEHRINGER, GREINER, ABBVIE, ...

The SLX series is derived from the SL series and has been especially for use in applications in the pharmaceutical, medical and food industries. To reduce machine downtimes, CIP and SIP ("cleaning in place", "sterilization in place") cleaning and sterilization processes are state of the art today. For this purpose, the machine interior is cleaned thermally and/or chemically with high temperature, pressure and aggressive media. The devices of the SLX series are perfectly equipped for use in this area and guarantee maximum reliability and service life thanks to their extremely robust design, a completely sealed stainless steel housing and high media and temperature resistance. KeyFeatures ■ Measuring ranges 10...300 mm ■ Linearity up to ±0.10 % of measuring range ■ High protection class IP68/IP69K ■ Operating temperature sensor up to 200 °C ■ High resistance to aggressive media ■ Customized designs

BIEGLO offers polyimide tubes with inner diameters starting from 2mm and going down to 100 micron. Our polyimide tubing are mainly used in the medical industry for catheters or neurovascular applications. Dexnyl polyimde tubings are extruded from thermoplastic polyimides and offer excellent pushability and tractability as well as ultra-smooth surface and transparency. USP class VI (USP 6) compliance is of course a given.

While oil is mainly used in the cosmetic and pharmaceutical sectors, in the food industry, in medical technology and in agriculture.

All connections are welded while avoiding the inclusion of oxygen, and the weld seams are made invisible through careful polishing. The workpieces are machined free of tension and distortion with uniform wall thicknesses. In the surface finish, structures of any type and surface roughness up to an area of ​​1000 x 2000 mm are possible. Our production conditions also allow the manufacture of products for clean room applications such as those required for the special hygiene requirements in the pharmaceutical industry, medical technology, the food industry and in the clinical sector. Machine housing Control cabinets Manufacturing facilities Aperture Disguises Covers Support frame

We offer a large standard assortment of high-quality tactile short-stroke switches or micro switches and micro switches. The switches and pushbuttons are characterised by a high level of workmanship and a long service life (up to 1 million cycles). The microswitches are used in medical technology, industry, entertainment technology and in the automotive sector and are suitable for PCB assembly. They are supplied on a roll. If your desired specification is not available in our standard range, please feel free to contact us at any time. Completely customised developments are also possible.

The xiMU is an exceptional USB2.0 device. It’s a complete, industrial grade 5 Mpix camera weighing just 3.4 grams including a full metal housing and as such it is the smallest available. It comes with a highly useful features for medical and industrial environments like GPIO and GenICam support. This camera always comes into play when size and mass are deciding factors.

The VA series 900 Diamond is suitable for appliances and equipment that require excellent resistance to corrosion and oxidation or are used in the food industry and medical technology. Of course, the 900VA series is also infinitely variable and designed for high temperatures up to 110°C.

When it comes to sophisticated plastic injection molding, we are completely in our element. We process all common thermoplastics, from standard to high-performance plastics. A fully automated production with handling systems for part removal and QA tests guarantees an economic production of your parts. We also have experience with the overmolding of various inserts such as threaded bushings, electronic contacts, circuit boards and much more. This and much more are the reasons why we are a reliable partner for almost all industries: Automotive industry aerospace industry Mechanical engineering Medical technology Construction industry Electrical engineering Jewelry and watch industry Furniture industry

The confocal chromatic confocalDT measuring system is used for fast distance and thickness measurements. Different sensor models and controller interfaces open versatile fields of application, e.g., in the semiconductor industry, glass industry, medical engineering and plastics production.

The combination of different fiber diameters allows us to design and manufacture progressive filter media in 3D. Our filter media products are exclusively manufactured on production machines designed and built inhouse. Thus we can offer a high flexibility as well as possible customized developments.We offer various media series for different areas of applications (for example automotive, HVAC, industrial and medical applications).

Stainless steel gas springs function the same as their common hydraulic counterparts, but give an alternative when operating under rough conditions such as off-shore and other outdoor exposure applications. Other commons application areas for stainless steel gas spring include health care products, food industry and medical devices.

Extremely tear-resistant, abrasion-proof and robust wipe (cellulose-polyester-mix) with smooth surface. Bright white, very absorptive and hard-working (high mechanical stressing). Resistant to solvents, squeezable and for multiple use. Main Fields of Application: Multi-purpose-wipe for highest demands on low-linting and tear-resistance. In pharmaceutical industry and medical engineering. Fine mechanic industry. Universal-use-wipe for labs. As degreasing wipe in automotive and paintshop area. In aircraft manufacturing. In workshops, production plants, engineering and transmission manufacturing. In printing industry for cleaning of press cylinders. Abrasion-proof, Absorptive, Capable of oil absorption, Low-linting, Resistant to solvents, Tear-resistant, Water absorption capacity

Extremely tear-resistant, abrasion-proof and robust wipe (cellulose-polyester-mix) with smooth surface. Bright white, very absorptive and hard-working (high mechanical stressing). Resistant to solvents, squeezable and for multiple use. Main Fields of Application: Multi-purpose-wipe for highest demands on low-linting and tear-resistance. In pharmaceutical industry and medical engineering. Fine mechanic industry. Universal-use-wipe for labs. As degreasing wipe in automotive and paintshop area. In aircraft manufacturing. In workshops, production plants, engineering and transmission manufacturing. In printing industry for cleaning of press cylinders. Abrasion-proof, Absorptive, Capable of oil absorption, Low-linting, Resistant to solvents, Tear-resistant, Water absorption capacity

Extremely tear-resistant, abrasion-proof and robust wipe (cellulose-polyester-mix) with smooth surface. Bright white, very absorptive and hard-working (high mechanical stressing). Resistant to solvents, squeezable and for multiple use. Main Fields of Application: Multi-purpose-wipe for highest demands on low-linting and tear-resistance. In pharmaceutical industry and medical engineering. Fine mechanic industry. Universal-use-wipe for labs. As degreasing wipe in automotive and paintshop area. In aircraft manufacturing. In workshops, production plants, engineering and transmission manufacturing. In printing industry for cleaning of press cylinders. Abrasion-proof, Absorptive, Capable of oil absorption, Low-linting, Resistant to solvents, Tear-resistant, Water absorption capacity

Heat-resistant wheels and castors are used in a variety of areas, from the food industry to medical engineering and other industrial applications. Requirements for these wheels and castors are equally diverse: in addition to withstanding high temperatures, they also need to meet hygiene requirements, resist corrosion and support heavy loads. Blickle has eight different wheel series in its standard range to cover these applications. These include series with specialised, highly heat resistant solid rubber and a pressed steel or synthetic rim. Wheel series made of nylon, phenolic resin and cast iron round out the range of heat-resistant wheel series. Temperature resistance ranges from -200°C up to +600°C, depending on the wheel series.

The special Metzner development is a fully automatic machinery consisting of a contact-free loop control, an automatic cutting machine and a crushing station with storage system. It can produce polystyrene pipettes with diameters from 4 to 25 mm and lengths from 100 to 700 mm. The extruded material is first scored with the aid of several rotary cutting heads, then broken and finally deposited in collecting containers. The cycle time for four parts is only 1.5 seconds. For the production of short lengths (up to 120 mm), the cycle time is extended to approximately three seconds.

Supplementing material properties Whether it’s the automotive industry, medical technology, or machine construction: the demand for material and resource-saving development runs throughout many industries. New, lighter weight materials and new kinds of material combinations offer possible solutions. However, such solutions frequently require a specialized surface coating that balances material properties, technological requirements, and specialized operating conditions to be successful. This balancing act places high demands on system technology, which must ensure these key attributes for ever more complex components in perfectly controlled processes.

- For contactless reading and writing of RFID chip cards - Used in e.g. refineries, tank farms, chemical industry, medical industry, food industry or power plants - Allows the build-up of intrinsically safe access control and identification systems - Application areas: loading at filling gantries, weighing, entry and exit area - High protection against rough environmental conditions due to sturdy aluminum housing (optional available as stainless steel housing) - Explosion protection according to European ATEX-standard 2014/34/EU BENEFITS - Type of protection IIC - Contactless reading - Tamper-proof by additional data encryption via a special Timm Elektronik card coding - Temporary data at chip cards can be saved and recalled - Individual, customer-specific coding possible

TAMPOPRINT GmbH is a well-established partner for the medical industry. We make markings, scales and decorations possible where other processes reach their limits. Starting with the project planning, the de-risking via validation process, URS, FMEA, IQ and OQ, via FAT and SAT to the production support. Our pad printing and laser fully automatic machines meet the highest quality requirements when used in multi-shift operation with high throughput speed. Highest precision of the print image registration on convex, round or flat parts by using the pad printing process, one to multicolor, or by using the ALFALAS® laser marking process goes without saying and meets the high standards for medical products. Process monitoring by using the latest camera systems as well as their validation will secure your production and the health of the patients.

The narrow band IR filters of the MPS4SENS 3C-2 carbon dioxide enhance the measurement of carbon monoxide (CO) (CWL: 4650 ± 40, HBW: 180 ± 20 nm), carbon dioxide (CO2) (CWL: 4415 ± 30, HBW: 60 ± 10 nm) and carbon compoundsn (CWL: 3400 ± 20, HBW: 140 ± 20 nm) with reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). The detector covers a wide range of applications in aerospace, medical, industry and environmental technology at ambient temperatures between -20 and 85 °C. Only Micro-Hybrid develops and manufactures 4-channel pyroelectric detectors with a thin film membrane made of ceramic pyroelectric material in a TO39 package. This high performance material gives the detector a very high detectivity of up to 4.0*10^8 cm√Hz/W and a high sensitivity of up to 200000 V/W. The unique detector design of Micro-Hybrid enables the high read-out rate up to 100 Hz as well as the short response time for reliable measurement results in NDIR gas analysis.

The highly sensitive pyroelectric quad detector allows the combined measurement of carbon monoxide (CWL: 4650 ± 40, HBW: 180 ± 20 nm), carbon dioxide (CWL: 4265 ± 25, HBW: 120 ± 10 nm) and carbon compounds (CWL: 3400 ± 20, HBW: 140 ± 20 nm) with reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). The detector can be used at ambient temperatures between -20 and 85 °C in numerous applications in aerospace, medical, industry and environmental technology. Micro-Hybrid is the only manufacturer of 4-channel pyroelectric detectors with a high performance membrane in a TO39 package. The very high detectivity of up to 4.0*10^8 cm√Hz/W and sensitivity of up to 200000 V/W is achieved by the pyrodetector MPS4SENS 3C-1 carbon dioxide due to the chips with a thin film membrane made of ceramic pyroelectric material. The unique detector design of Micro-Hybrid enables the high read-out rate up to 100 Hz as well as the short response time for reliable measurement results in NDIR gas analysis.

The dual channel pyrodetector is specially designed for the measurement of carbon monoxide (CO) using an optical filter with a CWL of 4650 ± 40 nm and a HBW of 180 ± 20 nm. Medical, industrial gas analysis and environmental technology are typical fields of application for the MPS2SENS carbon monoxide. The dual detector meets demanding needs at ambient temperatures ranging from -20 to 85 °C. It has a particularly high detectivity of up to 4.0*10^8 cm√Hz/W and sensitivity of up to 200000 V/W. An additional reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm) completes the product. The detector is equipped with 2 chips with a thin film membrane made of ceramic-pyroelectric material as technological basis. The unique detector design of Micro-Hybrid enables the high read-out rate up to 100 Hz as well as the short response time and guarantees precise and fast measurement results for NDIR gas analysis.

The narrow band filter of the MPS2SENS carbon dioxide with a CWL of 4265 ± 25 nm and a HBW of 120 ± 10 nm is optimized for the measurement of carbon dioxide (CO2) with reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). The detector suits for demanding applications in medical, industry and environmental technology. With its very high read-out rate of up to 100 Hz and a short response time, it provides precise measurement results reliably and quickly. The pyrodetector MPS2SENS carbon dioxide is based on 2 chips with a thin film CPM membrane. Thanks to the Ceramic Pyroelectrical Material (CPM) the detector features a very high detectivity of up to 4.0*10^8 cm√Hz/W and sensitivity of up to 200000 V/W. The signal quality of our pyroelectric sensors is unchallenged. The detector operates within ambient temperatures ranging from -20 to 85 °C and covers a wide range of applications: NDIR gas analysis, industrial process and exhaust gas measurement, and respiratory gas monitoring.

Our isothermal forging presses produce sophisticated, heavy-duty components for high-tech products. We furnish our customers with rst-class solutions including control systems for the ne-tuning of pressing speeds. Our presses are designed for high-precision applications indispensable in the aircraft/aerospace and medical engineering industries. The challenge here is to manage pressing speeds of 0.01 mm/s in controlled operation, which is ensured by our own electrical and hydraulic control engineering Siempelkamp also oers plants to be used for isothermal forging. They comprise the furnace, the feed manipulator, the forging press, the die heater, the hydraulic drive system and the entire automation technology. The plant control for isothermal forging presses monitors and documents the process parameters in compliance with the certication standards to be observed in the aircraft industry.

Heat Treatment furnaces MOV are ideal for the treatment of sophisticated materials if high temperatures and an absolutely clean hydro-carbon free atmosphere are required. Due to the ultrahigh vacuum atmosphere as well as the extreme temperature homogeneity and the fully automatic process the furnaces are especially suitable for the economic application in industrial and medical productions, i.e. for brazing of vacuum interruptors, parts of x ray tubes, heat exchangers, parts used in the medical and aerospace industry. Applications: MOV furnaces are universally applicable if heat treatment with particularly high requirements in respect of cleanliness for exacting materials is involved, for example: • Degassing of electric or radiation tube components • Bright- and stress-free annealing of high-temperature alloys • Sintering of high-melting and heavy metals such as tungsten • Production of high-quality fluxless braze joinings of steels, steel-ceramics and many other materials.

Caesium salts are used primarily as catalytic converters in basic materials chemistry. They are also employed in such sunrise industries as medical technology, biotechnology, pharmaceuticals, environmental protection and the defence sector. Which makes it all the more practical that Technologica has access to the largest known deposits of the caesium-rich pollucite ore. In Canada.

The DataMan® 8072 DPM Lite (DL) handheld barcode reader delivers powerful barcode reading performance for tough DPM codes on flat, highly reflective surfaces. It features the latest patented technology and advanced lighting and optics, ideal for automotive, aerospace, and medical device industry applications. DataMan 8072DL handheld barcode readers are optimized with powerful algorithms and technologies to read DPM, as well as 1D and 2D label-based barcodes, in the most demanding industrial environments. 2DMax® with PowerGrid® technology is a breakthrough 2D decoding algorithm, designed to read 2D codes with significant damage.