Mechanical movements - Import export

eddyMOTION is a Windows-based analysis and configuration tool for eddy current probes. In combination with the TX electronics from eddylab GmbH, the software tool combines several performance features: The functional areas oscilloscope, FFT analysis, data logger and waterfall diagram, enables the visualization and documentation of mechanical movements. eddyMOTION also suites the on-site linearization of eddy current sensors in a traceable manner, without external assistance. In addition to the TX electronics and an eddylab eddy current sensor, a reference probe is required for this purpose: Together with the eddy current sensor, this probe measures the distance to the same material, with the reference probe serving to check the sensor.

Dynamic Spur Gearboxes MS-Graessner produces customer-specific spur gearboxes of a helical or straight-toothed design. The design of the toothing is carried out using KISSsoft and our own design and calculation programs. In addition to the provision of technical support and advice to our customers, we also take over the entire engineering process. By working closely together with our customers, we guarantee the development and production of the optimum drive solution in each case. Advantages: economical production simple mechanical movement and power transmission high level of efficiency high running smoothness high axial and radial loads low circumferential backlash broad range of applications long service life

PVC-Control cables are used in tool-machines, conveyor belts, production lines in machinery production, in air-conditioning and in steel production. They are used for installing in dry, moist and wet rooms, specially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements.

The mobile laser welding machine ALFlak is particularly suitable for laser deposition and contour welding on large machine components, design components as well as on injection moulds and tools The sophisticated movement mechanism of the ALFlak enables you to work comfortably on large components - you can even immerse in deep, bulky shapes with the slim laser arm. With long weld seams, the ALFlak takes advantage of its large travel axes. A weld seam with a length of up to 500 mm is possible without settling - manually or according to a specified program. Welding can be done in manual mode, semi-automatic or fully programmed. The use of an automatic wire feeder or a rotary axis is also possible. It is the versatile possibilities for mobile welding that make it a very special welding system.

GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).

The displacement sensors of series RC20 are used in applications with harsh environmental conditions, which require a robust linear transducer with long life span, high accuracy and guided push rod with measuring lengths from 10 to 300 mm. The linear potentiometers of the series RC20 are designed for applications with harsh environmental conditions. For mechanical coupling, the displacement sensors are available in three mounting versions: mounting brackets, ball joints or flange. The variant with ball joints compensates movements transversely to the push rod, so that non-linear movements can also be coupled simply and without stress. The mechanical detection of linear movement is done by a front guided push rod

The series MM10 without spring return / MMR10 with spring return is used in applications with very confined space, which require a miniaturized displacement sensor with long lifespan, high accuracy and guided push rod on both sides. The linear potentiometers of the series MM10 / MMR10 are especially space-saving designed and therefore very suitable for applications with very confined space. The potentiometric distance measurement is carried out with a high-resolution conductive plastic resistive element. Thanks to this Comolded conductive plastic technology and the high-quality sleeve bearings, the compact displacement encoder has a very long lifetime and high accuracy due to its good linearity. In the displacement sensor series MM(R)10 the mechanical detection of linear movement is done by a rear and front guided push rod. The displacement sensor can be used both as a probe and with a guided push rod. The internal or external spring return opens up additional applications.

The compact displacement sensors of series RC13 are used in applications with harsh environmental conditions, which require a robust linear transducer with long lifetime, high accuracy and a guided push rod with measuring lengths from 25 to 250 mm. The compact linear potentiometers of the series RC13 are designed for applications with harsh environmental conditions. For mechanical coupling, the displacement sensors are available in three mounting versions: mounting brackets, ball joints or flange. The variant with ball joints compensates movements transversely to the push rod, so that non-linear movements can also be coupled simply and without stress. The mechanical detection of linear movement is done by a front guided push rod.

The carrying frame prevents belt misalignment and guarantees protection of the belt edges. As the carrying frames only function efficiently when the drum casing is clean, they are equipped and delivered with dirt repellent 60° shore soft rubber. Our carrying frames can be used with both normal and reversing conveyor belts. Mode of operation When the conveyor belt is running straight, the axle through the roller casing forms an angle of 90° to the direction of movement of the belt. When the belt drifts, the roller casing moves, due to the dead weight of the belt, so that a forward motion occurs which brings the belt back to its normal position. The roller casing returns to its normal position as soon as the corrective procedure is completed. The mechanics of the movement are rendered possible due to a complex ball joint in the centre of the roller as well as the position of the axle in relation to the conveyor belt being less than 90°.

Regular rollers prevent belt misalignment and guarantee protection of the belt edges. As the regular rollers only function efficiently when the drum casing is clean, the rollers are equipped and delivered with dirt repellent 60° shore soft rubber. Our regular rollers can be used with both normal and reversing conveyor belts. Mode of operation When the conveyor belt is running straight, the axle through the roller casing forms an angle of 90° to the direction of movement of the belt. When the belt drifts, the roller casing moves, due to the dead weight of the belt, so that a forward motion occurs which brings the belt back to its normal position. The roller casing returns to its normal position as soon as the corrective procedure is completed. The mechanics of the movement are rendered possible due to a complex ball joint in the centre of the roller as well as the position of the axle in relation to the conveyor belt being less than 90°.

The displacement sensors of series SPR18 are used in industrial applications, which require a compact linear transducer with spring-suspended probe tip, long lifespan, high accuracy, rear and front guided push rod with measuring length from 25 to 100 mm. The compact and robust linear potentiometers of the series SPR18 are designed for industrial applications. The housing profile made of anodized aluminium corresponds to the usual industrial dimension with 18x18 mm. The transducer has a stainless steel ball in the probe tip, for example for scanning profiles or for monitoring distances. In the displacement sensor series SPR18, the mechanical detection of linear movement is done by a rear and front guided push rod.