Mass production - Import export

CNC turning is a manufacturing process in which bars of material are held in a chuck and rotated while a tool is fed to the piece to remove material and create the desired shape. A wide variety of materials can be used in CNC turning, including:Aluminum, brass, bronze, copper, hardened metals, precious metals, stainless steel, steel alloys,ABS...

The stianless steel shafts, used in many fileds like construction manufacturing industry.

New crafts in year 2023 by Shenzhen Promostar New craft 1: large processing size Size 500*600 red copper large plate plated 24K gold mass production.(small gold-plated are common, but so large plate are rare in market)

iglidur® GLW: Strong and cost effective Pressure-resistant low.cost material for mass production. Low-Cost material for medium requirements. iglidur® GLW bearings are preferentially used in applications with static load, in which the bearing points move only occasionally. iglidur® GLW is available as cylindrical bearings and plain bearings with flange. Versatile use Maintenance-free, dry operation Low-priced Insensitive to dirt Insensitive to vibrations

In the production of rubber grommets and rubber seals, we use tools with special coatings and tooling concepts that prevent the adhesion of rubber parts (including TPE, EPDM). With this protocol, we guarantee safe mass production.

We offer our customers laser cutting of fine and thin sheets, as well as laser fine cutting of materials with very low material thicknesses (0.02 mm – 4.00 mm) as contract manufacturing. Of course we manufacture from the first sample and also up to mass production. If you do not know whether your material is suitable for processing with the laser, we will be happy to find out for you and provide you with a first demonstration sample free of charge.

We are your reliable partner for the realisation of your products - from the initial idea to series production and beyond. Our goal is to offer you a comprehensive full service and to manufacture your products economically and in the highest quality. We support you in the consultative development of your early concepts and prepare an initial cost estimate in the concept phase. In addition, we accompany you during series and mass production with our long-standing manufacturing partners in the Far East and ensure reliable logistical handling.

Slip-Clutch Screwdriver for Assembly. Tohnichi RNTD torque screwdrivers are used for repetitive tightening to a preset torque in mass production and maintenance. The preset design is ideal for use with fixed torque values in production lines. Commercially available standard 1/4 inch hex bits can be used (E 6.3). The no-load design of the rotary slip clutch prevents over-tightening after the preset torque has been reached. Greater reliability and durability by using the tilt-clutch torque mechanism. Key Features: Accuracy acc. EN ISO 6789 type II class C Clockwise rotation Rotary clutch mechanism ('Cam-Over') Standard bit insert E 6.3 (1/4 inch) Scope of Supply: Torque Screwdriver RNTD. Resin grip for model 120CN and 260CN. RNTD500CN comes with an auxiliary T-handle. Original operating instructions (jap./eng.).

High-performing frits for the most challenging chromatography applications POREX offers a variety of PE, PP and porous PTFE filters — commonly known as frits, for use in commercially available SPE columns, cartridges or multi-well SPE plates to facilitate column concentration to a vacuum manifold, needle or collection vessel. Hydrophilic, oleophobic, blended-resin, and functionalized materials are also available for use in the most challenging chromatography applications. Porex frits and filters offer: Controlled flow for optimized reaction time (kinetic control). Superior resin support due to narrow pore size distribution. Cleanliness and high purity with very low levels of extractables, leachables, and particle shedding. Custom designs in various disc, spherical, and other geometries to help ensure a tight material seal, optimized assembly operation, and no resin by pass. Fast & easy assembly in mass production - rigid structure facilitates manufacturing...

Click-Type Screwdriver for Assembly. Tohnichi NTD torque screwdrivers are used for repetitive tightening to a preset torque in mass production and maintenance. The preset design is ideal for use with fixed torque values in production lines. Commercially available standard 1/4 inch hex bits can be used (E 6.3). Like RNTD but with a click signal instead of the slip clutch. Ideal for applications that are sensitive to vibration and where rotary clutch vibrations might be problematic. Key Features: Accuracy acc. EN ISO 6789 type II class C Clockwise rotation Click signal Standard bit insert E 6.3 (1/4 inch) Scope of Supply: Torque Screwdriver NTD Resin grip for model 120CN and 260CN NTD500CN and NTD1000CN come with an auxiliary T-handle Original operating instructions (jap./eng.)

Novelis has created the first flat-rolled, aluminium-intensive electric vehicle battery enclosure designed for mass production vehicles. Learn more by downloading the product fact sheet. By utilizing Novelis’ highly-formable alloys, the battery enclosure provides automakers the ability to achieve deep drawn, complex shapes tailored to specific vehicle design requirements. The lightweight, high-strength material can help extend range, allowing vehicles to go 6-10 percent further on a single charge. With safety as a top priority, Novelis conducted extensive testing simulations to ensure its innovative, high-strength materials will protect batteries from road debris and vehicle crashes.

The products get transferred in a continuous-flow process. Products go through the scanner where the mass allocation of each product is determined using X-ray technology. The products are then weighed on the integrated weighing station according to their individual track. The system features a two-stage safety guarding for its radiation source. The CPS-X 400 is specifically designed for weight-accurate slicing of speciality products like Swiss Cheese and those which vary in density, e.g. fat to lean ratio. Optional: Detection of foreign objects: as well as ensuring reliable production, detecting foreign objects also protects units located downstream. This function can be used for detecting, e. g. stainless steel > Ø = 3 mm, glass/ceramic > Ø = 8 mm (product-dependent). Advantages Up to six products in one scan cycle Weight-precise cutting of cheese with holes Density determination of products with significant density differences (fat/lean proportion)

The Dymond Series of X-ray inspection systems is extremely versatile. Featuring 4 models it is able to cover the majority of applications for inspecting packaged products. With belt widths up to 800 mm it is ideal for multi-lane applications of up to 8 traces. Hygienic design, following EHEDG principles featuring sloped surfaces and curved edges allowing easy inspection and cleaning, resulting in considerable time and cost savings A wide range of standard possibilities for ensuring product integrity and quality including checking completeness, determining product mass and determining compartment mass Covering belt widths from 200 mm up to 800 mm 15" color touchscreen display Combining high detection sensitivity with low power consumption

Sweet creamy fillings in a moulded, crisp extrudate shell The latest in sophisticated products from direct extrusion are the co-extruded, centre filled products. In these products a soft filling with a pumpable viscosity is metered continuously, using a suitable pump, into an extruded pipe, simultaneously while it is being extruded. A special design co-extrusion die is used for this purpose. The result is an extruded pipe filled with a creamy mass. This pipe can then be moulded into various shapes continuously with the help of special moulding rollers. Raw-materials: It is important to choose a proper combination of the extrudate raw-materials and the filling mass in these kinds of products to ensure that they combine harmoniously in the final product to give a compatible eating experience to the consumer.

One blind rivet nut for all grip ranges. The innovative and patented development of the Honsel-Group was in 2007 the first mass-production multigrip blind rivet nut. The product has a lot of advantages over the common standard types like no mixing of different grip ranges, reduction of storrage and failure costs or the reduction of item diversity.

In terms of project management, the respective feasibility study is a matter of course. No offer without a feasibility study. -An offer implies manufacturability; this is how our process is defined! - We live from prototypes and small series. Often there is no second assignment, so there shouldn't be any unforeseen surprises. Or at least only within a manageable framework. The combination of metal and plastic composite parts makes this a challenge from time to time. But you can be sure that here we draw on a wealth of experience that we would like to share with you.

Get a higher level of automation and increased efficiency, without compromising quality and precision. Our affordable and proven solutions, ranging from encapsulation, testing and encoding of chip modules to glue tape lamination, provide the speed, quality and economy for profitable chip module production. RFID Inlay Production Wire embedded antennas produced on ruhlamat machines are extremely cheap and yet provide the best product characteristics compared to etched or plated antennas. Our reliable machine solutions offer great flexibility and productivity, enabling you to make both prototypes and mass products in an economical way and with consistently high quality. From antenna embedding to production of complete RFID inlays and eCovers, the options are versatile. Card Personalisation We excel in providing innovative card personalisation solutions. Our system enables you to produce highly personalised smart cards, secure IDs, and financial cards quickly and economically. We...

The NanoWeld stations provide the ideal platform for the development and production of opto-electronic components, like singleand multi-channel transmitters and receivers. The station works with exchangeable trays and grippers accepting all device housing types and lenses, optical fibers or receptacles to be aligned and attached. Cycle times for the rapid mass production of TOSA type assemblies reach less than 25 seconds while it takes several minutes for complex devices.All components and subassemblies to build the NanoWeld station are of highest quality and performance. Even customized systems start from a common platform which minimizes development time and cost. By using device-specific trays and grippers, the time to change between different batch processes or device types is reduced to the minimum. Loading and unloading of these trays is performed on a separate loading station outside of the automated NanoWeld. The automated alignment starts from a known reference position.

Non Woven Pillow- and Bed-Bags Example: Promotional bag Order: 5,000 pieces Size of intended contents: 67cm wide x 37cm high x 13cm, deep reference for mass production is sample production bag (contents will be a pillow) Measurements (outer measurements): 75cm wide x 45cm high (no base, no folded sides) Material: 90 g/m² non-woven material, honeycomb pattern, clear colour matched to pantone 7529U, PE lamination 0.08mm, transparent Edge binding: On all seams Stitching: Front Side: - Upper section: Non-Woven (75cm x 6cm) with grommets - Middle section: Transparent PE foil (75cm x 30cm) with document pocket - Base section: Non-Woven (75cm x 9cm) Rear side: - All Non-Woven, same as rest of bag Document / Advertisement Pocket: Transparent PE foil (interior size 30cm x 21cm, fits A4 documents) welded inside, visible on left side of foil (see upper of two pictures); A4 document pocket, placed 9cm beside the left window corner Handles: PE cords in colour pantone 7529 U, hand length...

Non Woven Pillow- and Bed-Bags Example: Promotional bag Order: 5,000 pieces Size of intended contents: 67cm wide x 37cm high x 13cm, deep reference for mass production is sample production bag (contents will be a pillow) Measurements (outer measurements): 75cm wide x 45cm high (no base, no folded sides) Material: 90 g/m² non-woven material, honeycomb pattern, clear colour matched to pantone 7529U, PE lamination 0.08mm, transparent Edge binding: On all seams Stitching: Front Side: - Upper section: Non-Woven (75cm x 6cm) with grommets - Middle section: Transparent PE foil (75cm x 30cm) with document pocket - Base section: Non-Woven (75cm x 9cm) Rear side: - All Non-Woven, same as rest of bag Document / Advertisement Pocket: Transparent PE foil (interior size 30cm x 21cm, fits A4 documents) welded inside, visible on left side of foil (see upper of two pictures); A4 document pocket, placed 9cm beside the left window corner Handles: PE cords in colour pantone 7529 U, hand length...

COMBER Condry® - Series TDC 25 - TDC 15000 The Condry conical bottom agitated vacuum dryer was developed to process a wide variety of products. The machines have proven to be particularly suited for the drying of heat sensitive products as well as products with fragile crystal structure and thus sensitive to shear forces. The conical bottom allows for full product discharge characteristics. Special properties for the customer’s benefit: In compliance with cGMP and FDA guidelines, also in aseptic/ steam sterilizable versions Excellent product discharge performance with negligible product hold-up due to the conical vessel bottom, very close agitator to wall/bottom clearances and a unique agitator design The agitator permits uniform mixing of the entire product mass, without the formation of lumps or balls The surface area for heat transfer is maximized for optimum performance and cycle times Agitator supported by the top head, with the seal in contact with the vapors only Entirely...

COMBER Turbodry® - Series TD 0.8/1.1 - TD 40/60 The Turbodry agitated vacuum pan dryer has proven to be excellent for the drying of sensitive, pasty and other “diffcult” products that pass through a highly viscous stage during the drying process. The dryers have proven to be particularly suited for the drying of heat sensitive products as well as products with fragile crystal structure and thus sensitive to shear forces. Excellent product discharge and shortest cycle times. Special properties for the customer’s benefit: In compliance with cGMP and FDA guidelines, also in aseptic/ steam sterilizable versions Shortest possible drying times, suitable for the drying of sensitive, pasty, sticky and other “diffcult” products such as those turning highly viscous during the drying process Simultaneous axial and radial agitator movements permit uniform mixing of the entire product mass, without the formation of lumps or balls Double mechanical seal, dry running contacting or...

Graf-Flex-SP2 seals The Graf-Flex-SP-2 seal is a pointed sheet seal produced by a special process. The design of the seal is based on empirical values. Numerous tests have been carried out to verify the adhesion between the pointed sheet and the graphite coating as well as the surface quality, and thus the adhesion between the coating and the flange surface.The first phase of these tests led to special perforation of the carrier plate in terms of the geometric shape of the hole and hole distribution. The second phase took account of the adhesion of the seal to the surface of the flange and defined the surface quality of the graphite material. The values found in this way were transferred to the mass production process using a special procedure. . This consisted of a specially produced perforated roller for penetrating the sheet together with a special surface roller. Finally, the graphite coating is applied to the defined surface in the calendering process.

Our Breeze technology has many enormous advantages over the previous classic lubrication applications. Discover enormous savings potential for mass production when using our LSJ Mini in your process. This system can be used optimally in the event of always consistent tool operations. For the machining process, an average of between 5 and 50 ml of lubricant is used per process hour and tool. These consumption values can also be briefly — depending on the requirements of the individual operation — increased to up to 200 ml per process hour. In addition to this excellent advantage over the previous method, the HPM Breeze method offers further enormous advantages from an economic and ecological point of view. • For optimum use with a cooling channel diameter of 0,9 mm² and up. • Manual adjustment of the pressure parameters • Optimally suited for consistent series processes with one parameter

COM Express Mainboard (carrier board) Key functionalities For scalable platforms (from Intel Atom ® to Core ™ i7) Tested with many COM Express modules from different CPU module vendors. Applicable in Mini ITX systems Flexible extendibility Embedded features Long-term availability High level of functional reliability and durability (24/7) High quality "Made in Germany" Developed in the framework of Embedded Building Blocks Suitable for - Rapid Prototyping - Mass production in small, medium und large quantities

3DMicromac‘s highly versatile microFLEX™ product family is the all-in-one solution for manufacturing flexible thin films in photovoltaics, electronics, medical devices, displays, and semiconductors. The production systems can handle various substrates, material thicknesses, and types such as polymer films, stainless steel, and thin glass. The microFLEX™ systems combine high precision laser processing with cleaning and packaging technologies, as well as inline quality control. Due to its modular concept, various customized solutions are available, reaching from industrial mass production to pilot lines as well as applied research. High throughput and efficiency on-the-fly processing; high machine uptime; multiple tension controllers; contactless substrate guiding Highest flexibility easy machine layout modification by modular concept Cost advantages Long term security of investment; reasonable cost of ownership; easy to upgrade and modify; different micro environments.

3DMicromac‘s microCELL™ OTF meets cell manufacturers‘ demands for increasing the efficiency of PERC solar cells, by precise surface structuring, low operating costs and highest availability. The system is suitable to process mono and polycrystalline silicon solar cells. Laser processing on-the-fly and an innovative handling concept enable maximum throughput and yield in the mass production of crystalline solar cells. The contactless cell handling enables processing without surface defects or microcracks. On-the-fly laser processing with unbeatable cost benefit ratio Contactless wafer handling High throughput and efficiency (> 3.800 wph) Low cost of ownership and CAPEX Upgrade for existing production lines or expansion

Hardware kits based on Embedded PC Platform QSys A modular Embedded PC Platform based on Qseven Suitable for: Individual Embedded systems (Integration in devices/equipments) Embedded PCs Industrial PCs / BoxPCs Panel-PCs Display systems / Digital Signage Embedded PC - as easy as a standard PC Key functionalities Fully functional Hardware kit Available with Qseven modules based on Intel® Atom™ E3800 and AMD G-Series Optimized for Ultra Low Power Extended temperature range Onboard eMMC and mSATA socket Integrated Security Features Ultra compact design (10cm x 10 cm x 2.3 cm) Longevity Also usable as embedded alternative for Intel® NUC Standard boards (eNUC) Suitable for - Rapid Prototyping - small and mid range mass production