Zinc-plated steel - Import export

These parts used for mechanical .

This is the parts use in priter accessories, main suopprt bracket.

This is the parts used for printer accessories.

Sturdy and practical galvanized or stainless steel linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The shaped raceway rail, the flat raceway rail and the telescopic rail are available in stainless steel or galvanized sheet metal. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces. Three rail width sizes: 20mm, 30mm and 45mm Standard rail lengths up to 3,120mm; different lengths upon request Low coefficient of friction Combination of T and U rails for self-aligning bearing applications Easily adjustable slider preload Polymer based wipers available for added roller bearing protection (available on for the thin body style slider) High temperature resistance up to 120°C/250°F The stainless steel X-Rail linear guide version is corrosion resistant, and ensures...

Sturdy and practical linear rails with radial ball bearing sliders. The X-Rail is a family of linear guides with radial ball bearing sliders for applications requiring cost efficiency and high resistance to corrosion. The linear guides with shaped raceways and the linear guides with flat raceways are available in stainless steel or galvanised or nitrided metal sheeting. With the T + U configuration, the X-Rail system can compensate for any axial misalignment in parallelism of the mounting surfaces.

steel, zinc plated*Ø 12 mm*

steel, zinc plated*threaded M 10*Ø 12 mm

screws: nickel plated steel*zinc diecasting*for rods up to 16 mm Ø

zinc plated or stainless steel

For fitting the standard brush types 36 and 37 we can supply our holders (C-profiles) of zinc plated steel from stock, with which the brushes can easily be replaced after wear. If you cannot use the standard types, it is advisable to use the advantages of our lath brushes standard cores. You can get the types listed in the table from stock.

height adjuster M10 steel yellow, zinc plated fot plate Ø36mm

Riveted nut Strong side threads Eyebolt cannot be lost Boss M10 For round and square downspout pipes Available surfaces: Hot dip galvanized, nut zinc plated Solid copper, nut zinc plated and yellow chromatted Solid titanium - zinc, nut zinc plated Stainless Steel AISI 304 (1.4301) We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Flat washers ~DIN 125 (~DIN EN ISO 7089) form A Material: zinc-plated steel (final digits 52) stainless steel (final digits 53)

Countersunk screws - metal ~DIN 963 (~DIN EN ISO 2009) Material: machining steel 4.8 zinc-plated

Hexagon head screws - metal ~DIN 933 (~DIN EN ISO 4017, threaded to head) Material: machining steel 4.8 zinc-plated

Pan head screws - metal ~DIN 85 (~DIN EN ISO 1580) Material: machining steel 4.8 zinc-plated

Lens head screws - metal, cross slot ~DIN 7985 (~DIN EN ISO 7045 - form H) Material: machining steel 4.8 zinc-plated

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments; ideal for applications in which space is limited Features ▪ Cap diameter of Ø70 mm / Ø2.76 in ▪ Screw-in version, equipped with male BSP thread (ISO 228) or male NPT thread (ANSI B1.20.1) ▪ Bayonet version with a six-hole bolt pattern for flange interfaces similar to DIN 24557, part 2 Materials ▪ Body and cap made of glass-fibre reinforced Polyamide (PA) ▪ Socket made of Steel, zinc-plated ▪ Bayonet flange made of Steel, zinc-plated ▪ Basket made of Steel, zinc-plated or Polyamide (PA) ▪ Sealings made of NBR (Buna-N®) Consult STAUFF for alternative materials. Technical Data ▪ Operating temperature range: -40 °C ... +120 °C / -40 °F ... +248 °F ▪ Mounting set including bayonet flange, steel or plastic basket (800 μm), gaskets and bolts ▪ Metal basket ▪ Plastic basket ▪ Pressurisation up to 0,7 bar / 10 PSI ▪ Air...

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SMBT-47 (Screw-in version; Cap Ø 47 mm / 1.85 in) ▪ SMBB-47 (Bayonet version; Cap Ø 47 mm / 1.85 in) ▪ SMBT-80 (Screw-in version; Cap Ø 80 mm / 3.15 in) ▪ SMBB-80 (Bayonet version; Cap Ø 80 mm / 3.15 in) ▪ SMBP-80 (Push-on version; Cap Ø 80 mm / 3.15 in) Materials ▪ Breather cap made of Steel, zinc/nickel-plated (Fe/Zn Ni 6) and free of hexavalent chromium CrVI (standard option); chrome-plated and epoxy-coated versions available ▪ Bayonet flange made of Steel, zinc-plated ▪ Basket made of Steel, zinc-plated or Polyamide (PA) ▪ Dipstick adaptor made of Polyamide (PA) ▪ Sealings made of Cork (for filler breathers without pressurisation) or NBR (Buna-N®) (for pressurised filler breathers) ▪ Metal basket ▪ Plastic basket ▪ Pressurisation up to 0,7 bar / 10 PSI ▪ Air filter element ▪ Locking feature ▪ Dipstick...

Nominal volume: 660 L Nominal loading capacity: 270 Kg + manufactured by compact injection moulding process from high molecular weight, high-density polyethylene (HDPE) in accordance with the test + regulations of DIN EN 840 and RAL GZ 951/1 + resistant to frost, heat and chemicals; stabilised against UV radiation + standard emptying options of either DIN or comb-lifting device; optionally with Ochsner handles of zinc-plated steel + quiet-running, full rubber heavy-duty castors of 200 mm diameter, 360° swivel range + wheel stop brake system (dual stop) as standard feature; alternatively available with central braking system + zinc-plated, corrosion-resistant metal parts + frontal comb is equipped with a chipnest to accommodate data carriers in accordance with DIN 30745 and RAL GZ 951/1 + optimised for high stacking with strong stacking ribs + drain plug in the bottom facilitates cleaning + available colours: grey, blue, brown and green

Nominal volume 240 L Nominal loading capacity 96 Kg + manufactured by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + produced from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised for outdoor use, resistant to chemicals and temperature variations + emptied by a stepped comb-lift, shape A + quiet-running, solid rubber wheels, standard diameter 200 mm, also available with 250 mm diameter + corrosion-resistant, zinc-plated steel axle + all usual colours and combinations (e.g. grey, blue, green or yellow) available + ready to accommodate data carriers/transponders (chipnest) + marked with the appropriate noise level and the CE symbol in accordance with the regulations of directive 2000/14/EC + smooth surfaces facilitate easy cleaning + the lid is equipped with ergonomic handles + stacking ribs allow for high stacking + all parts of the wheelie bins can be recycled at the end of their useful life

Nominal volume: 80 L Nominal loading capacity: 40 Kg + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised for outdoor use, insensitive to temperature variations and chemicals + stepped comb-lift, reinforced with ribs, for maximum safety when emptying the waste bins + very stable; fitted with 200 mm diameter solid, quiet-running rubber wheels + corrosion-resistant, zinc-plated steel axle + lid with drip edges minimises the escape of condensation water + the waste bins are available in standard colours grey, green and brown; additional colours available + with chipnest in the frontal comb to accommodate transponders (RFID chips), + compatible with the most widely-used ID and weighing systems + complies with the noise control regulation in accordance with EC directive 2000/14/EC and is marked with the appropriate noise level

Nominal volume: 10 L + with folding, zinc-plated, corrosion-protected steel wire carrying handle + resistant to frost, heat, UV radiation and chemicals + available in green and brown + integrated stacking ribs allow for stacking of the trash/garbage cans + the container’s smooth surfaces are easy to clean + environmental protection: Our pre- sorting containers can be fully recycled at the end of their useful life.

Material Brass and Carbon Steel Surface Finishing Carbon Steel: Zinc-Plating and Thick-Film-Passivation (Chrome III) Standard Seal Material(s) NBR (Buna-N®) Working Temperature -25° C ... +100° C / -13° F ... +212° F Valve Design Flat Valve Connection Screw Disconnection Screw Connect Under Pressure not allowed Application Industrial Hydraulic ISO Interchange -

Nominal volume: 770 L Nominal loading capacity: 310 Kg + from high-quality, high-density polyethylene (HDPE), manufactured by compact injection moulding process + complies with the regulations of DIN EN 840 and RAL GZ 951/1 + tested, monitored and marked with the GS symbol (Tested Safety) in accordance with the German Product Safety Act. + resistant to UV rays, frost, heat and chemicals + fits all standard lifting devices (DIN and comb-lifting); available with Ochsner handles from zinc-plated steel + equipped with quiet-running, solid rubber heavy-duty castors, 200 mm diameter, 360° swivel range, wheel stop as standard feature; also available with central braking system + corrosion-resistant, zinc-plated metal parts + available colours: grey, blue, brown and green, additional colours upon request; all colour pigments used are colour-fast + with chipnest as standard, to accommodate transponders/data carriers in accordance with DIN 30745 and RAL GZ 951/1

Nominal Volume: 360 l Nominal Payload: 144 kg + certified waste bins 360 litre + UN-approved for the transport and collection of dangerous materials + wheelie bins marked for clinical waste in accordance with UN3291, packaging group II + liquid-tight / watertight (without drainage hole) + waste container with triangular slamlock + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + clinical / hospital waste bins with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + wheelie bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol + medical waste containers for sharp and pointed instruments, anatomy / pathology waste and infectious waste

Nominal Volume: 240 l Nominal Payload: 96 kg + certified waste container 240 litre + UN-approved for the transport and collection of hazardous goods and hospital waste + wheelie bin marked for clinical waste in accordance with UN3291, packaging group II + liquid-tight / watertight (without drainage hole) + waste bin with triangular slamlock + manufactured by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV, frost, heat and chemicals + corrosion-protected steel axle, zinc-plated + waste container with integrated chipnest in the frontal comb; this can accommodate a transponder (RFID chip) compatible with the most widely used ID and weighing systems + our waste bins meet the requirements of EC directive 2000/14 EC. Marked with the appropriate decibel level and CE symbol + waste containers for hospitals & clinical waste

Nominal volume: 120 L Nominal loading capacity: 48 Kg + manufactured in accordance with the specifications of DIN EN 840 and RAL GZ 951/1 using the compact injection moulding process + produced from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV radiation, high and low temperatures as well as chemicals + standard emptying by stepped comb-lifting device (shape A), reinforced by additional ribs + equipped with two solid rubber maintenance-free wheels (standard diameter 200 mm) + zinc-plated continuous steel axle, corrosion-proof + drip edges on the inside of the lid prevent the escape of evaporating liquids + available in grey (black), green, brown, yellow, blue, etc. + ribbed chipnest, compatible with the most-widely-used ID and weighing systems, for secure mounting of transponders/data carriers + complies with the requirements of EC directive 2000/14/EC and is marked with both the CE symbol and the appropriate noise level (LWA)

Designed for direct installation into return lines to reduce fluid aeration, foaming and noise; should always be installed below the minimum fluid level Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Design and Materials ▪ 2 concentric tubes with inner spaced holes ▪ Installation below the minimum fluid level of the reservoir with the plain area facing the pump inlet ▪ Threaded end cap made of Aluminium ▪ Other components made of Steel, zinc-plated Special sizes, designs, materials and configurations are available on request. Consult STAUFF for details. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Max. working pressure: 20 bar / 290 PSI