Wire devices - Import export

Testing requirements for a manufacturer in electronics industries had changed: For an assembly included in a smartphone, the absence of contact between speaker ultra fine wires and adjacent components is essential. Fulfillment of this condition, until now only subjected random sampling by microscopy, from now on has to be verified in a 100% procedure. Due to labor cost, microscopy for this amount of inspection is no more lucrative. Detection of ultra fine wires in electronic device The particular challenge The fine wires made of copper in smartphone speakers dispose of a high reflection and only a small diameter. The QuellTech Solution A high-resolution QuellTech 2D/3D Q4-5 Laser, featuring a particularly adapted laser wavelength and an ultrafine laser line in the corresponding installation, is combined with a linear axis equipped with a convenient encoder output. Due to its special chip analysis, the Quelltech sensor delivers a stable and highly reproducible signal on the fine wires

The RESISTOMAT® model 2320 is a universally applicable and easy to operate measurement device for low-ohmic resistances. The light and handy device in a stable IP54 plastic housing with membrane keypad is likewise suitable for use in service, laboratory or on the production floor. The power supply is done via built-in rechargeable battery packs or by standard batteries. If need be, the temperature of samples can be measured and the sample resistance is subsequently compensated to fit the value at 20°C. This applies for samples with resistances depending on the sample’s temperature. The temperature coefficients for copper and aluminium are included as standard. A third and fourth coefficient may be set individually for any given material to be measured. Features: — Measuring ranges from 40 mΩ to 4 kΩ — Resolution up to 10 μΩ — Measuring accuracy 0.05 % Rdg. — Autorange — Temperature compensation — Bipolar measurement — Input voltage protection up to 415 Vrms

Bus Bar Working Stations for Bus Bars and Flat Material Punching Tools for Bus Bars and Flat Material Cutting Tools for Bus Bars and Flat Material Bending Tools for Bus Bars and Flat Material Brochure Tools for Control and Switchgear Cabinets Tools for Laminated and Flexible Bars and Earthground Sheet Metall Hole Puncher DIN Mounting Rail Cutting Devices Wiring Duct Cutting Tool Punching Tools for Sheat Metall

Retractable Power Distributor/power bollard SV501 for indoor and outdoor use, made of saltwater-resistant aluminum. Due to its solid construction, the SV501 lowering distributor can be driven over by a truck, of course, only when the lid is fully closed. The surface is anodized with a stainless steel look. The retractable power distributor SV501 is equipped with 8 protective contact sockets 2 / 16A 230V with hinged cover (unsecured, without wiring). The devices are raised and lowered using a crank. Drainage is required for outdoor installation. The housing is watertight when closed, protection class IP67. Alternatively, other combinations are also possible. Further equipment variants and colors on request.

The RBK 60 S is an extremely robust water-cooled weld head for a standard heat exchanger application up to an ID of 60 mm, modified to an ID of 99 mm or 120 mm. The head is pneumatically centred and is available with a rotating wire device and/ or arc voltage control (AVC) as an option. The head can also be used with a pneumatic positioner instead of a balancer. Versions: — RBK 60 S weld head with pneumatic centring, including hose package, 8m, water-cooled — RBK 60 S weld head with pneumatic centring and wire feeder incl. hose package, 8m, water-cooled — RBK 60 S weld head with pneumatic centring, wire feeder and AVC incl. hose package, 8m, water-cooled Package includes: — Weld head — Small torch incl. torch consumables and tungsten electrode Ø 2.4 mm — Water-cooled hose package, 8 m — Pull bar B — Transport case Optional: — Div. spring sleeves and pull bar sets for RBK 60 S — Torches, Balancer, Tube-to-tubesheet positioner...

The model SK15 is a robust stud welding gun, designed for welding of threaded studs with ceramic ferrules ø 4 - 12 mm Ideal for short cylce stud welding ø 3 - 12 mm Best for stud welding using shielding gas ø 3 – 12 mm Lifting range 1 – 4,5 mm Standard support with 2 legs High repeatability Body made of fibre-glass reinforced polyamide Control cable plug (4 wire) Optional Integrated shielding gas device

This pressure transmitter is particularly well suited for monitoring filters and pressures in HVAC (heating, ventilation and air conditioning) applications. DIP switches allow users to configure the output signal and switchable measurement ranges (optional). Settings provide an option for conversion to a root-extracted output signal (displayed as a % of the maximum output value). An internal button is also available for performing a zero-point correction or fine-tuning the end value. An optional display allows users to read the measured value directly on site in Pa or kPa. With an optional time constant (up to 10s), the instrument can produce an attenuated output signal, even under unstable pressure conditions. An optional two-wire version of the device is also available for reducing wiring complexity. In addition to simple wall-mounting with just 2 screws, the PS 17 is also suitable for mounting on top-hat rails.

TYP C 060 Cutting and forming Device for jumper wires Description The Streckfuss model C060 is designed to cut and form 20 to 22 gauge jumper wires. The machine has an adjustable center to center distance and uses interchangeable die sets to vary the cut length. The wire straightener, feed clamp and backlash assembly combined with an adjustable feed stroke produce a precise jumper wire every time. Components

The Round Solutions PingPong is an embedded IoT/M2M hardware platform made for Software Developers. The platform supports extension boards that add unlimited capabilities. It can be used to easily make physical devices that connect to the web. It's literally plug, push and play. PingPong comes with both wired and wireless connectivity. The device is available in two open-source SW versions. While the RTOS version comes with the world's fastest 32-bit microcontroller running in C/C++, the Linux version uses the powerful ARM Cortex processor for even more functionality and applications. PingPong base circuit boards also have a high speed Telit cellular module, a high accuracy positioning component for the Global Navigation Satellite System (GNSS), Ethernet, USB, CANBUS among other items. The Evaluation Kit comes with a dedicated M2M/IoT SIM card and connectivity to a cloud platform.

Features ■ Pressure transmitter with on-site indication for relative pressure measurements ■ Safety pattern gauge S3 per EN 837-1, NS 100 and 160 alternative high quality case with bajonet ring per EN 837-1 S1 ■ Nominal range 0…0.6 bar up to 1000 bar ■ Output signal: 4…20 mA (20…4 mA) 2-wire technology ■ Integrated angle-of-rotation sensor, not subject to wear ■ EAC declaration (upon request) Options ■ Approvals/Certificates - Calibration certificate - Explosion protection for gases and dust - Certificate of measuring equipment for Russian Federation - Material certificate as per EN 10204-3.1 ■ The electrical zero can be corrected by holding a ferromagnetic object to a marked location on the case ■ Additional switch function ■ Diaphragm seals see product group D5 ■ Output signal 0...20 mA and 0...10 V in 3-wire technology (for devices without Ex-protection and without zero point setting)