Wheels- special - Import export

The choice of the right profile sanding wheel for wood sanding must be determined based on the customer’s requirements. Our highly experienced engineers and application technicians would be pleased to advise you by phone or email, on a high quality and cost-effective type of profile sanding wheel of the FAPI-SW series for your process. The profile sanding wheels FAPI-SW are made of the same material used for flap grinding wheels. The significant difference lies in the highly elastic surface of the profile sanding wheel FAPI-SW. This is achieved with individual, disconnected slitted, abrasive cloth packages separated by a large distance to one another and fastened to the wheel hub.

Reliable leveling castor with integrated mounting plate for fixation to aluminum profiles with modular dimension 40 and 45 mm For positioning and transporting machines Wear-resistant castors ensure a long service life with minimal abrasion. They have a dynamic load capacity of up to 340 kg. This means that racks weighing a maximum of 340 kg per castor can also be moved safely. Castor diameters of 50 or 62 mm also allow uneven surfaces to be driven over up to 10 mm. Roller movement locking by temporary positioning on stamp actuation of the height adjustment of the stamp via adjustement wheel in the castor housing with wrench No additional transport and base plate needed Material & surface: Bolt hole plate: steel, zinc plated Housing: die-cast aluminium, powder-coated Adjustment wheel: Plastic PA Stamp: rubber NBR Roller: Plastic PA Incl. open-end spanner for assembly

Uniformly wide lamellae of foamed up Vulkollan® are attached at alternating angles with plastic foam lamellae attached in the spaces between them to the aluminium hub of the FAPI-KS/V SPECIAL. The height of the coating or the length of the lamellae of foamed up Vulkollan® and plastic foam can be varied depending on the application (standard: 25 mm). The longer the lamellae are, the less rigid the material becomes, which in turn reduces the aggressiveness of the contact wheel. Advantages Because of their lamellae of foamed up Vulkollan® and plastic foam, contact wheels of the FAPI-KS/V – series are extremely aggressive contact wheels. Benefits of contact wheels with this design: Maximum removal rate Plastic lamellae provide optimum cooling of the abrasive belt Wear-resistance Oil-resistance Grease-resistance We will be happy to advise you in order to find a suitable contact wheel for you.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

Compact single-stage worm geared motor with solid shaft. Different shaft positions are possible. Stock motors have 57W or 90W output power and a speed of 3000 rpm. An additional version with 93W and a speed of 3300 rpm is also available. The SN18 can be used wherever space is limited. It is widely used, for example, in door automation. Gearbox type: SN18 solid-shaft Motor type: 24V DC permanent magnet Mounting design: B3/B14 Ratios SN18 Solid Shaft: 2,5; 5; 7; 10; 12; 15; 18; 20; 24; 30; 38; 50; 55; 75; 100; Ratios SN18H Hollow shaft: 7; 15; 20; 30; 55; Protection class: IP40 /IP54 (Other protection classes on request) Additional data: — Motor and gear in ball bearing — worms hardened and ground — Worm wheels from special bronze For further information see product detail page.

Compact single-stage gear with solid or hollow shaft combined with a 24V DC permanent magnet motor. Different shaft positions are possible. Stock motors have 28W or 54W output power and a speed of 3000 rpm. The SN15R / SN15HR comes as a 24V-BLDC with integrated operating and control electronics, overload protection and a 4-Q Pi Controller - 40W output power and a speed of 4000 rpm. Gearbox type: SN15 (solid-shaft) / SN15H (hollow-shaft) Motor type: 24V DC permanent magnet Mounting design: B3/B14 Transmission ratios: 3; 7; 10,5; 15; 21; 30; 40; 68 Protection class: IP40 (Other protection classes on request) Additional data: — Motor and gear in ball bearing — worms hardened and ground — Worm wheels from special bronze For further information see product detail page.

Feeding of filtered-out materials to silo systems over long distances (up to 700 m). Pneumatic medium-pressure conveyor systems For the conveying of filtered-out materials such as wooden splinters and wood dust or for the conveying of products in the derived timber products industry with large conveying quantities over great distances. Pneumatic medium-pressure conveyor systems are economical, reliable and enable flexible adaptations to individual conveying routes. The conveying air stream is generated by a rotary piston compressor. As opposed to fans, these have almost vertical characteristic curves; i.e. the volumetric flow rate remains almost constant as the pressure in the conveying system increases. This ensures safe material transport. Special cellular wheel sluices are necessary for channelling the conveying material into the conveying stream, such as knife gates for derived timber products. Cyclones, filters or combinations of the two are used to separate the conveying material from the conveying stream. The economical conveying lengths lie between around 150 and 750 m. The loading of the conveying stream can amount to up to 5 kg/m³ and essentially depends on the grain size, density and form of the material to be conveyed.

We offer quality backpacks, bags, messenger bags and spoke wheel bags, specially designed for wheelchair users. All our bags are printable, e.g. with your company logo. We also offer string / shopping bags for wheelchairs. Our textiles are manufactured according to the latest European norms and quality standards. For more information about our products please visit our webshop www.shop.com or contact us.

Simply roll this mobile anchorage system for individuals over to where it is to be implemented to protect up to 2 people from falls - without any further installation effort. Our ABS SafetyBull, which is equipped with smooth-running wheels and has plenty of room for tools, is the perfect temporary fall arrest solution on a flat roof surface. EN 795:2012, B + CEN/TS 16415:2017 Flat roofs < 5° Simple to use Special wheels make it easy to move Total weight: 274 kg Optional: Toolbox Side bars (2x) Tray for materials Additional weights (11x)

Heavy-duty castors with polyurethane wheel - wheel body made of special grey cast iron with ball bearing - tread made of molded polyurethane, approx. 95° shore A - heavy welded steel construction The strongest Torwegge housing series consist of a welded steel construction for maximum dynamic stresses. The swivel castor housings are equipped with sealed axial rib ball bearing an tapered roller bearing and thus particularly sensitive against surges and beats. The housing head is screwed and secured by a heavy center bolt. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application. In addition, PU offers low rolling resistance.

Heavy-duty double castor with polyurethane wheel - wheel body made of special grey cast iron with ball bearing - tread made of molded polyurethane, approx. 95° shore A - heavy welded steel construction The strongest Torwegge housing series consist of a welded steel construction for maximum dynamic stresses. The swivel castor housings are equipped with sealed axial rib ball bearing an tapered roller bearing and thus particularly sensitive against surges and beats. The housing head is screwed and secured by a heavy center bolt. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application. In addition, PU offers low rolling resistance.

• with extra large cutting wheel - ø 76 mm • specially sharpened • very solid - ergonomically shaped - finger protection element • comfort-soft-touch handle

• for commercial use • designed for cans in catering size • cutting-knife-principle • knife and traction wheel specially hardened and tin-plated

SOLAS person marking lights (PML) is a special emergency lighting for rescue services, approved according to MED (steering wheel). PML is a special emergency lighting for sailors, surfers and divers (diving depth to 100m) and burning time by 8 hrs. Moreover, it is used by French and American coastguard. SOLAS PML is especially suitable for hard-shell jackets and can be easily fixed with the help of clamping device. It consists of two independent light sources. The white flashing light starts automatically by contacting water and can be activated manually, too. Burning time is 8 hours. Afterwards the chemical light source can be activated by bending the black protective cover. The chemical light source (green light) provides 8 hours burning time as well, waterproof and 4 years durable. All chemical light sources are non-toxic and do not burden the environment!

The storage of car parts requires both solutions to accommodate bulky goods and the ability to store sensitive goods (such as already painted body parts) without damage. Whether it is packed goods, body parts, tyres or rims - with installation kits from SCHULTE Lagertechnik everything is in perfect hands. — tyre-protecting storage through optimised tyre cross beams or storage on rounded wide span spars — Racks for small, medium and large parts storage — all car racks have the 25 mm grid perforation — Can be combined with the entire connector system — various accessories — special car shelf sets — Construction of multi-storey racking systems possible — individual adaptation to different wheel, tyre and rim sizes — quick assembly by simply plugging in the levels — tyre-protecting storage of the wheels through specially shaped cross beams — optimised height 2,750 mm for the storage of SUV wheels — variably applicable for wheels with 550 - 750 mm Ø