Waxes - Import export

The Mantis hard wax is a full body depilatory wax . The Mantis hard wax can be applied safely in areas of the body such as the face and the delicate areas.

The PMMA BLANK is developed to be used in milling machines for making temporary restorations, for gingiva formation after placing dental implants and for accurate determination of the occlusal contacts before placing zirconium prosthetic structures. The WAX BLANK are used in the fabrication of wax modeling, in the lost wax process for casting, making denture restorations and for frameworks for crown and bridge models . It was developed for cast and pressing techniques.

Wax release agents can be produced in a wide variety of compositions and qualities. These industrial products are typically used as release layers in boat building, as shoe soles, bumpers, dashboards or as PU-foam. You can find detailed information about our range of products on the website www.oskars.biz

OSKAR S M-800 is especially formulated for mouldings with high exoterm temperature or preheated moulds in polyester, epoxy, aluminium or nickel. lt contains a mixture of high quality synthetic waxes and lubricants, to provide an outstanding heat resistant mould protection and easy release of finished parts.

In addition to cleaning agents the Wachsfabrik Segeberg GmbH offers a wide range of wax-, solvent- and soap-based care products. These include among others car waxes, self-shining waxes and floor polishers, leather greases, shoe polishes or wiping waxes. Likewise, in the field of care products the individual consultation of the customer as well as the flexibility of development and manufacture of the products is a priority.

When it comes to relaxation and wellness, products such as massage oil, massage lotions or massage candles are the first way to do something good for your body.Wax is not only a component of candles, but also an important element in the production of cosmetics, wellness cosmetics and wellness products. We produce valuable cosmetics, massage oils, aroma waxes and sauna infusions on customer order from tried and tested ingredients. The essential and skin care products are specifically designed for relaxation, regeneration and stimulation and are a boon for body and soul. Sauna infusions: That certain something from essential oils A sauna infusion is precisely the beneficial composition of essential oils that has a stimulating, relaxing or wholesome effect during a sauna session. The composition possibilities are manifold. The production of high-quality substances of the highest purity is guaranteed. Massage oils: The perfect relaxation.

Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering (tropics, ocean, industrial atmosphere) Ideal on-call and storage protection for spare parts with possibility of direction installation Advantages and benefits Highly effective due to good film-forming properties Outstanding corrosion and oxidation protection No degreasing prior to commissioning required, as compatible with all lubricants Waterproof and resistant to weathering Suitable for all climate zones No surface discolouration NSF H2 registered (only OKS 2100) Also available as spray version OKS 2101

100% No: 1 Grade Carnauba Base. OSKAR'S M-700, especially formulated for easier application to polyester- and epoxy moulds. Highly heat-resistant. Provides outstanding mould protection and easy release of finished parts. Formulated to prevent wax build-up. Silicone free.

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

ALWA release wax (art. no. 9516000) is used to release patterns and moulds. ALWA release wax is applied in a thin coat with a brush or a soft sponge. After the solvent has evaporated, a polishable release film is formed.

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

• Model measurements up to 1.000 x 600 x 500 mm • Same handling as for conventional wax parts • Tool-less and hence more cost-effective process • Single items and small series can be produced within a few days • High degree of accuracy: ±0.4% (min. +/- 100 µm) • Wax infiltration creates closed smooth surface • Suitable for autoclaves, even for thin-walled shells • Can be burnt out in normal kiln with low emission formation • Does not expand during burn-out process, hence no shell cracking (whether gypsum or ceramics) • Residual ash contents <0.02% for polypor binder type C • All alloys can be used with lost-wax casting process

Firelighter cubes made from FSC®-certified wood and a plant-based eco-wax are suitable for use as barbecue firelighters, chimney starters and for lighting fires. Safe, low-odour and certified according to DIN EN 1860-3 – quality made in Germany. The shape of these firelighters is also often described as eco firelighters or brown firelighter cubes.

Firelighter cubes made from FSC®-certified wood and a plant-based eco-wax are suitable for use as barbecue firelighters, chimney starters and for lighting fires. Safe, low-odour and certified according to DIN EN 1860-3 – quality made in Germany. The shape of these firelighters is also often described as eco firelighters or brown firelighter cubes.

Firelighter cubes made from FSC®-certified wood and a plant-based eco-wax are suitable for use as barbecue firelighters, chimney starters and for lighting fires. Safe, low-odour and certified according to DIN EN 1860-3 – quality made in Germany. The shape of these firelighters is also often described as eco firelighters or brown firelighter cubes.

Firelighter cubes made from FSC®-certified wood and a plant-based eco-wax are suitable for use as barbecue firelighters, chimney starters and for lighting fires. Safe, low-odour and certified according to DIN EN 1860-3 – quality made in Germany. The shape of these firelighters is also often described as eco firelighters or brown firelighter cubes.

Firelighter cubes made from FSC®-certified wood and a plant-based eco-wax are suitable for use as barbecue firelighters, chimney starters and for lighting fires. Safe, low-odour and certified according to DIN EN 1860-3 – quality made in Germany. The shape of these firelighters is also often described as eco firelighters or brown firelighter cubes.

Firelighter cubes made from FSC®-certified wood and a plant-based eco-wax are suitable for use as barbecue firelighters, chimney starters and for lighting fires. Safe, low-odour and certified according to DIN EN 1860-3 – quality made in Germany. The shape of these firelighters is also often described as eco firelighters or brown firelighter cubes.

Firelighter cubes made from FSC®-certified wood and a plant-based eco-wax are suitable for use as barbecue firelighters, chimney starters and for lighting fires. Safe, low-odour and certified according to DIN EN 1860-3 – quality made in Germany. The shape of these firelighters is also often described as eco firelighters or brown firelighter cubes.

Firelighter cubes made from FSC®-certified wood and a plant-based eco-wax are suitable for use as barbecue firelighters, chimney starters and for lighting fires. Safe, low-odour and certified according to DIN EN 1860-3 – quality made in Germany. The shape of these firelighters is also often described as eco firelighters or brown firelighter cubes.

Firelighter cubes made from FSC®-certified wood and a plant-based eco-wax are suitable for use as barbecue firelighters, chimney starters and for lighting fires. Safe, low-odour and certified according to DIN EN 1860-3 – quality made in Germany. The shape of these firelighters is also often described as eco firelighters or brown firelighter cubes.