Water regulator - Import export

Pressure regulator of the compact series for water Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Pressure range up to 15 bar

Water Retention Box made of recycled PP material. With high temporary and possibly permanent retention volume in combination with a Flow Control System for specific regulation of water discharge and/or water storage.

Optigrun Water Retentionbox WRB 170 on roofs used as retention areas, under extensive and intensive vegetation as well as traffic areas such as terraces, fire brigade access roads, car parks, etc.With closed, load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System With Capillary Bridges to transport stored rainwater from the drainage level into the substrate layer and to increase evaporation High compressive strength With freely flowable structure for quick distribution of rainwater within the retention room Suitable for inverted roofs (when used on inverted insulation, no permanent water storage is possible)

Infiltration trough made of recycled PP intended for surface drainage in combination with a Flow Control System; high water retention potential, used for intensive green roofs with 0° roof pitch and varying layer heights.Base plate with load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System High compressive strength With freely flowable structure for quick distribution of rainwater within the retention room Suitable for inverted roofs (when used on inverted insulation, no permanent water storage is possible

— For continuous feed water control — Increased efficiency of flue gas heat exchangers — Fewer pump circuits — Constant boiler water level — Minimum flow rate for cooling the feed pump is assured Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

PROCESS DATA MEASUREMENT AND PROCESS CONTROL ON HIGHEST LEVEL AND MAINTENANCE-FREEFollowing the user‘s request for easy maintenance and low susceptibility to slightly soiled water, the proflow ultrasonic - as a replacement for the current and widely used standard measuring variant with impeller, turbine or vortex - now makes contactless measurement according to the ultrasonic principle (without rotating parts) available. The sensors can be visualized via a protemp controller or connected to a PLC. Alternatively, the mechanical flow measurement according to the differential pressure principle is available with the proflow mechanical. Easy to integrate in machines and plant lines 4 or 6 x consumer channels (forward/return) 1/2“ With LED-display on fl ow sensor Temperature measurement PT 1.000 Big RED/GREEN Status LED 1 x main connection 1“ Flow rate each channel 1 ... 30 l/min (no „overload-risk“-> 60 l/min possible]) Operating temperature: 0 ...120 °C

PROCESS DATA MEASUREMENT AND PROCESS CONTROL ON HIGHEST LEVEL AND NEARLY MAINTENANCE-FREEFollowing the user‘s request for easy maintenance and low susceptibility to slightly soiled water, the proflow mechanical - as a replacement for the current and widely used standard measuring variant with impeller or turbine - now makes mechanical measurement according to the differential pressure principle (without rotating parts) available. The sensors can be visualized via a protemp controller or connected to a PLC. A completely non-contact flow measurement based on the ultrasonic principle is available with the proflow ultrasonic. Robust flow measurement in consumer return line PT 1.000 temperature measurement in consumer return line 6 x 2 consumer channels 3/4“ female screw thread 1 x 2 main connection 1“ female screw thread Available in three temperature variants: operating temperature up to 100°C, up to 160°C and up to 180°C Max. flow rate each channel:: 25 l/min or 50 l/min

The multiple water quantity control system in modular design that is available in several versions fulfils not less than three requirements at the same time. It combines the advantages of the conventional water distributors, the impulse cooling systems and the continuously operating temperature control units while eliminating the disadvantages of each of these systems. The temperature control system disposes of up to 128 individually adjustable circuits and is suitable for the processing of polyolefins and technical thermoplastic materials. In case of the basic execution (itd B) the requested flow rate is adjusted manually and is then monitored by a flow meter and presented digitally and graphically on the central display of the control unit. In the standard execution (itd R) the water quantity is individually set for each circuit at the central operating unit and - if necessary - is readjusted automatically via a water quantity regulation valve within adjustable limit values.

Water cooling unit for use with the EVO 200 WP or LITE controller and Tetrix 200 in conjunction with water-cooled welding tools.ols. — Standalone or continuous operation possible — Temperature-regulated fan control — Water flow feedback through in-built flowmeter Package includes: — Water cooling unit — Inverter / cooling unit (permanently mounted) connection cable — Fasteners for EVO series — 4 l blueCool 10i-5 coolant

The Mini Water Vac is a designated oil purification unit which can be applied directly to various types of machine reservoirs. It dehydrates and cleans most types of oils such as lubricating, hydraulic, transformer, and switch oils. The Mini Water Vac is a self-regulating filtration unit which removes particles, gas, and water. The purified oil satisfies the most stringent quality requirements. Motor/Pump Units ▪ Different configurations available Optional Extra ▪ With water sensor Filter Elements ▪ Filter elements of SRM series Construction ▪ Vacuum Dehydration Unit for industrial applications Max. System Volume ▪ 3.000 l / 795 gal Recirculating Flow Rate ▪ 90 l/h / 23.8 gal/hr Materials ▪ Filter housing: Anodised Aluminium ▪ Vacuum chamber: Anodised Aluminium ▪ Heater chamber: Anodised Aluminium Removals ▪ 100% of free water, >80% of dissolved water ▪ 100% of free gases, >80% of dissolved gases

Boiler feed water The so called „Boiler feed water“ is stored in a feed water tank and continuously feeded to the boiler of a steam generator. A big quantity of feed water is needed for example in steam power plants. The boiler generates steam, which is used for heating, for chemical processes or for driving a steam turbine respectively a steam engine. The feed water is purified in a way, that all harmfull components for the boiler are removed or neutralized. Leakages and evaporation loss are compensated by additional water which is purified in the same way than boiler feed water. Very often, valuable well and potable water resources are used for the generation of process water. Environmental regulations restrict this usage of well and potable water continuously and increase the costs for this resources steadily. The conditioning of stream water to boiler feed water helps saving potable water and means cost advantages. The process of conditioning is based on ultra filtration with down

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications!

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications!

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications!

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications! The practical SANHA-Box range comes in many versions: Preconfigured boxes are available for wash basins and sinks, through baths and showers, and onto water meter connections. All SANHA-Boxes are also available with already isolated multilayer plastic pipes. A complete overview of our product portfolio and the complete range of accessories can be found in our brochure – or simply call us at +44 1628 819245!

The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications! The practical SANHA-Box range comes in many versions: Preconfigured boxes are available for wash basins and sinks, through baths and showers, and onto water meter connections. All SANHA-Boxes are also available with already isolated multilayer plastic pipes. A complete overview of our product portfolio and the complete range of accessories can be found in our brochure – or simply call us at +44 1628 819245!

Benefit from the advantages of the biofilter and of the counter current scrubber in one single system. Thanks to the high specific surface of the packing material and thanks to a controllable irrigation a demanding concentration of contaminants like H 2S can be treated in a compact system. Cost-effective Space-saving construction that can be built into height No filter material exchange Microorganisms settle at inert materials Low running costs with high concentrations of contaminants Easy to maintain user interface Controllable milieu conditions Regulation of water supply Dosing of mineral nutriments Automatic pH-control Automatic desalination Well-thought-out conception Self-cleaning measuring probes Low pressure drop Low risk of clogging Durable construction Plant components made from corrosion and chemical resistant materials 30 years of experience Active references of each size Worldwide delivery, installation and service