Water dry - Import export

Transport and disposal costs, at over 70 percent, represent by far the largest cost item in sludge dewatering. A powerful dewatering assembly is thus an important criterion. With a Flottweg HTS Decanter in the C series, you can achieve the highest possible total dry solids in the dewatered sludge, thereby continuously saving on transport and disposal. More than 50 years of experience in the dewatering of sewage sludge and continuous further development have gone into the design of the Flottweg HTS Decanter. This experience, combined with references from the entire world, makes Flottweg one of the leading providers of mechanical separation technology. The HTS Decanter is attractive for its performance, its efficiency, and its high cost-effectiveness. The decanters in the Flottweg C series cover a throughput range from about 5 to over 150 cubic meters per hour. We can offer you comprehensive know-how and customized systems.

Dry lubrication with solid lubricants as longer-acting reserve layers in area of low sliding speeds subject to high surface pressures and pre-determined sliding paths Wear protection for increased service life of sliding surfaces Fully effective even after longer standstills Resistant to high temperatures, no adhesion of dust and dirt Advantages and benefits Highly effective due to good adhesion to prepared substrates Consistent coefficient of sliding friction under maximum loading of sliding film Wear protection of sliding points that can otherwise not be lubricated is possible Firmly adhering, pressure and temperature-resistant dry lubricating film

Dry lubrication for applications where pastes or powders have been used up until now Chain lubrication of heavily loaded chains in temperature ranges in which oil or grease lubrication is not possible For example, in annealing, stoving and baking ovens for aluminium tube manufacturing, in painting systems or in baking lines Advantages and benefits Hygienically harmless as defined in German LFGB Approved by Nuremberg LGA for use in food processing technology NSF H2 registered Economical due to low consumption Optimum wear protection at high pressures and extreme temperatures Can be mixed with water in ratio of up to 1:5

Oil-, water-, dirt- and stainproof impregnation for high-quality concrete products. Water-based, fast-drying, water beading and oil beading effect and easy-to-clean effect.

Oil-, water-, dirt- and stainproof impregnation for high-quality concrete products, frequently used for surface- treated (shotblast, bush-hammered, brushed) concrete products. Water-based, fast-drying, strong and long lasting water beading and oil beading effect and easy-to-clean effect.

Oil-, water-, dirt- and stainproof impregnation for high-quality concrete products, frequently used for surface- treated (shotblast, bush-hammered, brushed) concrete products. Water-based, fast-drying, strong and long lasting water beading and oil beading effect and easy-to-clean effect.

Universal construction dryer – newly definedWhether water damage restoration, construction drying or keeping cool commercial spaces dry – reliable drying technology is needed for alternating use on different construction sites. Extremely tough and fail-safe with a high dehumidification performance, even at cold ambient temperatures. This is exactly what characterizes the construction dryer TTK 500 from Trotec. This professional condenser dryer has been consistently designed to provide maximum mobility for ever-changing sites of operation and to withstand rough working conditions. This is why the TTK 500 features not only a carriage with adjustable push handle, but also large wheels with non-marking rubber tyres – all combined in a robust metal housing. For storage or transport, the design of the TTK 500 allows the devices to be positioned closely together, so that many construction dryers can be transported to the site of operation with only one trip.

Desiccant dehumidifier TTR 200 The lightweight under the high-quality dehumidifiers: the extremely compact and mobile TTR 200 The TTR 200 is an extremely compact and lightweight quality dehumidifier for keeping room air continuously dry or for drying during water damage restoration. All TTR 200 are equipped with the advanced electronic Monoventic air volume regulation which allows stepless, demand-oriented regulation of the required dry air volume. Dehumidification performance and thus power consumption as well as noise emission of the TTR 200 can therefore be defined as required at any time. Even the standard model has an integrated DIN socket for remote switching to control the TTR 200 by means of an optional hygrostat, time clock or other external switching devices with matching DIN plug.

Small size, great performanceThe TTK Qube combines all performance requirements of a professional living space dryer – condensed in an ultra-compact design Particularly in the case of water damage restoration, the aim is to remove moisture from the highly humid air in the shortest possible time. What restoration companies need for this purpose are professional condenser dryers for continuous use with a high dehumidification performance, lifetime and reliability. What restoration companies no longer need are large, heavy devices that can only be manoeuvred across storeys with great effort and also take up a lot of space in the service vehicle, which sometimes requires driving to the site of operation several times. TTK Qube – reduction to the maximum The TTK Qube does not make water damage drying itself any easier – but much easier to handle.

COMMERCIAL DEHUMIDIFIER TTK 650 SReliable technology and large drying capacity Black-white. Tip-top. Good and cheap. The TTK 650 S available exclusively at Trotec is of traditional EU manufacturing and demonstrates in a respectable way that a price level of the Far East is indeed compatible with robust brand quality. Using this powerful device for drying after water damages or for construction drying you can benefit from a budget-friendly dehumidification solution without compromising in terms of workmanship and reliability. Even frequently changing sites do not pose a problem to the TTK 650 S because thanks to the stable carriage construction with bar handle and large wheels for maximum mobility this dehumidifier can be transported quickly and easily from one site of application to the next.

The TOPAZ Partfill is used, for example, in rainwater tanks or in tanks that should generally be filled as little as possible with city water. It ensures that in dry seasons the lowest required water level is automatically maintained with a partial fill. This allows the connected systems to continue operating while the tank has the maximum possible capacity for rainwater collection.

TTK 120 E Dehumidifier The TTK 120 E combines trendy design with advanced dehumidification technology in a durable housing construction. Thanks to its robust housing made of stainless steel the TTK 120 defies even the harshest application environments. This makes it to be a flexible dehumidifier from keeping dry living areas, archieves, store rooms as far as drying up after water damages. The change from one operation location to another can be easily achieved due to steering wheels and bar handles on both sides. Special features: SuperDry function (permanent drying) Automatic hygrostat controlled dehumidification Easy-care material combination with an eye-catching look Electronic automatic defrost Warning lamp: to indicate that the water tank is full Overflow protection with auto power off Carry handles, swivel casters Connectivity for an extern condensate drain

Ensures brilliantly shiny dishes – straight from the machine. During the washing process, together with the PROFESSIONAL Dishwasher & Dishwashing Detergent Concentrate Robbyrob, it ensures that leftovers, stains and stubborn deposits are gently removed from your dishes. Thanks to the quick-drying effect, the water runs off glasses and dishes easily, resulting in a streak-free shine. Other sizes available on request

COMMERCIAL DEHUMIDIFIER TTK 170 SPowerful technology for workshops, storage spaces and construction sites Whether for drying after water damage, construction drying or dry keeping of heated or unheated storage and work rooms, with this universal dehumidifier you can benefit from a budget-friendly dehumidification solution without compromising in terms of workmanship or reliability. For behind the price tag on a Far East level, there is a robust metal plate from traditional EU manufacturing accommodating tried and tested brand technology that runs and runs and runs. Easy-care, low-maintenance, reasonably priced. The TTK 170 S is, for instance, equipped with a professional hot gas automatic defrost system yielding effective dehumidification results even at low temperatures. Or with a stable carriage construction and large wheels which even simplify frequent changes of location.

Up to three processes – cleaning, painting and drying in one booth. Multi-process booth Just one booth for cleaning, painting and drying (up to three processes). Dry paint filter and wet cleaning in one booth – that is actually a contradiction in itself. Thanks to the separate air guidance, the exhaust air is fed downwards through the grating when drying and laterally through the filter boxes when painting, so that very little moisture enters the dry filter and virtually no particles get into the cleaning water. In order to prevent the ingress of particles, the gratings can additionally be covered over during painting. Any paint that does get into the cleaning water is usually already dry, so that no dilution in the classic sense takes place; instead, it behaves like small, filterable plastic balls. Advantages:

After cleaning we use drying systems in order to achieve spotless drying, to protect corrosion-sensitive parts or to avoid water intake into production. The drying systems can be integrated in manual or fully-automatic cleaning processes. KLN manufactures various drying systems in several versions.

If no procedures for biological or chemical exhaiust air cleaning are to be used efficiently, the thermal treatment is regarded as method of choice. The basic thermal processes are Recuperative thermal oxidation Regenerative thermal oxidation Catalytic oxidation. The focus of our products lies particularly in the periphery of especially challenging special solutions Waste treatment Sewage sludge drying Waste water treatment Landfill aftercare Specialpurpose solutions for the chemical industry Food industry In general at corrosive media, at risk of condensation, and especially high specifications for the pure gas Since 2018 we are working close with our sister company Airprotech Srl. from Magenta/Italy in the field of thermal exhaust air cleaning. Beside our core products our range of products in the field thermal exhaust air cleaning is broadened Airprotech is specialised in the development, the manufacture and the supply of turnkey plants for thermal cleaning

This PERKUTE cleaning system cleans simply and effectively with a very confined cleaning space. The machine is easily loaded by using either a crane or a loading carriage to place the items to be cleaned on the platform. A noticeable feature of the FR cleaning machine is that it offers several simultaneous work process. The PERKUTE-system: economically - environmental – effektive Basic equipment Made of stainless steel Simple operation Space-saving Tank cover, filter basket incl. Low water pressure switch as dry-run protection Suction filter made of stainless steel in front of the pump Adapter for steam extraction Minimum operational costs because of housing insulation in sandwich construction Rotationg blast pipe system incl. fan nozzles Adjustable feed Pneumatic lift gate Programmable electronic control

This cleaning machine "Rhönrad" is the ideal choice for the cleaning of parts with cropped areas, which needs to be moved during the cleaning process (rotate or swivel around the horizontal axis). Through the use of a special height adjustable lock-system also smaller baskets can be used without problems. Multi tank systems for special subsequent processes can complemented as well as drying and bath treatment systems. The PERKUTE-System: economically - environmental - effektive Basic unit § Stainless steel version § Compact and sturdy construction § Modern design § Powerful washing pump § High permissible basket load § Low water pressure switch as dry-run protection for pump and heating elements § Tank cover in the return flow, filter baskets incl. § Programmable Siemens S7-1200 touch panel control § Complete machine casing in modern design § Loading ramp incl. collection tray and grating for manual loading § Service hatch for cleaning activities § Mountings for fork-lift §...

The extensive power spectrum of this solid production series in combination with the standard equipment coordinated optimally sets new standards in cleaning technology. The solid interpretation of the machine components connected with the modern design of the easy-care machine case completes the innovative machine concept. By the choice of specific accessory articles many possible applications open up. The PERKUTE-system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Modern design Powerful washing pump High permissible basket load Low water pressure switch as dry-run protection Tank cover in the return flow, filterbasket incl. Programmable operation operating counter incl. Housing insulation Loading carriage incl. Grate bearing Digital temperature indication Electronic basket drive (PF 100; PF 150) Square blast pipe system (PF 200) Rotation blast pipe system (PF 300) Adjustable feed

The approved and economic system of this multi-tank-machine offers various possibilities for all applications in the area of the production and manufacturing industry. Most different process steps like cleaning, rinsing, inter-rinsing and drying makes the machine the all-round talent. The PERKUTE system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Simple operation Adjustable feed fork-lift facility incl. 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Electronic basket drive Tank cover in the return flow, filter basket incl. Long wash liquid service life due to the skimmer (washing tank) Programmable operation operating counter incl. Automatic steam extraction by air blower Powerful washing pump in the washing- and rinsing tank High permissible basket load 2" socket slide valve for the tank emptying Safety limit switch at cover Separate washing- and rinsing tank

This ergonomic advanced development of the proven SP series distinguishes itself through a user-friendly charging system in the form of a movable loading trolley. For large batches, it can also alternatively be equipped with a loading ramp or lateral movement station.In this manner, loading and unloading processes, even of heavy or voluminous components, can be carried out in an optimized manner. The PERKUTE-System: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Simple operation Mobile, can be used anywhere 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Electronic basket drive Tank cover in the return flow, Long wash liquid service life due to the skimmer Programmable operation operating counter incl. Automatic steam extraction by air blower Powerful washing pump High permissible basket load Safety limit switch at cover 2" socket slide valve for the tank emptying Load...

A compact and sturdy construction characterizes the SP machine which is an closed fully automatic machine. The SP meets the highest requirements where total cleanliness and dryness are concerned. We adjust our production to individual demands and are therefore able to offer tailor-made solutions. The PERKUTE-system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Simple operation Mobile, can be used anywhere 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Electronic basket drive Tank cover in the return flow, filter baskets incl. Long wash liquid service life due to the skimmer Programmable operation operating counter incl. Automatic steam extraction by air blower Powerful washing pump High permissible basket load Safety limit switch at cover 2" socket slide valve for the tank emptying

A solid single-chamber parts cleaner for automatic water based spray cleaning. This series is extendable by varies extras which can be retrofitted. The RC-machine is a low costs entry to the modern world of industrial parts cleaning. The PERKUTE-system: economically - environmental – effektive Basic equipment Compact and sturdy construction Made of stainless steel Simple operation Space-saving 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Suction filter made of stainless steel front of the pump Adapter for steam extraction Basket drive by water pressure (RC 68, RC 82) Electronic basket drive (RC 122, RC 162) Preparation for electronic basket drive (RC 82) 2“ socket slide vlave for the tank emptying Safety limit switch at cover

Properties: ALDOVET AIR is a liquid flavoring agent based on essential oils, for dispensing in trough water, running feed and dry fodder for livestock. Its characteristic freshness influences the fodder agreeably by improving its taste and aroma. Application: ALDOVET AIR can be applied as an additive for trough water, in running or dry feed or by nebulization within the animal house.