Wall units - Import export

Wall distributor 5623E with 5 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half-cylinder lock, even with plugged-in standard plugs. The surface-mounted wall distributor 5623E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5622E with 4 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The surface-mounted wall distributor 5622E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Wall distributor 5620E with 2 CEE slots and a housing made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The on-wall distributor 5620E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost

Wall distributor 5606E with 6 slots. The housing of the wall distributor is made entirely of stainless steel. The door can be locked with a profile half cylinder lock and can also be closed with standard plugs inserted. The 5606E on-wall distributor is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.

Firm hold in any position Demag DBM battery magnets are the ideal solution wherever you need to transport magnetisable loads safely and efficiently. They can be used independently of a power supply and are therefore highly versatile. Whether used as stationary units with wall or slewing jib cranes or as mobile equipment with cranes or forklift trucks, Demag DBM battery magnets allow you to transport loads weighing up to 4 tons easily and safely from A to B. DBM battery magnet -Universal application -Compact design -High safety and reliability -High load capacity -Loads are always safely picked up -Automatic charging control Universal application -Outdoor operation also possible with IP43 enclosure (power source, charger and control elements combined into one unit) -Single metal sheets or plates can be separated from the load by flicking the toggle switch -High load capacities

To view and download the brochure please click on the left image. Hollow Blocks manufactured with a egglayer / block macking machine from Knauer Engineering Pumice Blocks manufactured with a egglayer / block making machine from Knauer Engineering Retaining wall units manufactured with a egglayer / block making machine from Knauer Engineering Curbstone manufactured with a egglayer / block making machine from Knauer Engineering Palisades manufactured with a egglayer / block making machine from Knauer Engineering

Egglayer / block making machine system has a long tradition. The first automatic KNAUER egglayers / block making machines for the production of high-quality concrete products were developed in the 50s and 60s. The working principle remains the same. Referred to the investment / productivity ratio, the manufacturing of concrete elements like hollow blocks, landscape units, bricks, retaining wall units, etc. onto a concrete slab is to this day the most cost-effective and efficient method. KNAUER has continued to extend its egglayer / block making machines line and developed new concepts that are state-of-the-art. The KNAUER-system egglayers / block making machines are working today fully automatically, are controlled by PLC and are provides with the latest technology.

To view and download the brochure please click on the left image. Tradition and Progress Egglayer / block making machine system has a long tradition. The first automatic KNAUER egglayers / block making machines for the production of high-quality concrete products were developed in the 50s and 60s. The working principle remains the same. Referred to the investment / productivity ratio, the manufacturing of concrete elements like hollow blocks, landscape units, bricks, retaining wall units, etc. onto a concrete slab is to this day the most cost-effective and efficient method. KNAUER has continued to extend its egglayer / block making machines line and developed new concepts that are state-of-the-art. The KNAUER-system egglayers / block making machines are working today fully automatically, are controlled by PLC and are provides with the latest technology. Around the world many of KNAUER egglayers / block making machines are in daily operation.

EC technology: New EC technology is a revolution in electronic drive technology. It enables precise adjustment to output requirements thanks to its continuously variable operation. Easy installation Drill 4 x, screw and KaCool W is already on the wall. It could hardly be easier to work with! And if the need is not known beforehand: now you know how easy it is to retrofit the KaCool W. Variety of variants The product range gives you freedom of choice: on-site or separate infra-red control, or a wide selection from the Kampmann control range Easy access All the components are compactly installed inside the unit and so are easily accessible. Discreet Elegant enough to notice - discreet enough not to stand out. Subtly creating the perfect climate.

TIP – Well-tempered air The solution for the optimum, centrally controlled heating and ventilation of buildings of all kinds. With a housing made of sendzimir galvanised sheet steel with threaded rods fitted as standard, TIP unit heaters are ideal for wall-mounting as well as ceiling-mounting. Functional principle Air is drawn in through the sheet metal sickle-blade silently-operating fan and is blown through the copper/aluminium heat exchanger into the room. The models with large heat exchange depth are ideal for use with low temperature operation. Benefits —Sickle-blade, whisper-quiet fan with optimised full nozzle —Easy to install —Unbeatable in terms of value for money Kampmann is completely modernising its unit heaters. We are responsibly taking a courageous step forwards and we will be relying systematically on EC technology to power and control our units. Reasons: — No wasted power — Minimum noise levels — ErP-compliant future

TOP – Temperature-adjusted air TOP unit heaters – “TOP” in terms o f price and performance – largely meet the demand for economical and controllable air handling. TOP unit heaters are all-purpose units that can be installed on the wall or ceiling. Operating principle Air is drawn in through the sickle-blade silentlyoperating fan and is blown through the heat exchanger into the room. The models with large heat exchanger capacity are ideal for use with low water temperatures. Applications Buildings of all kinds, which are to be ideally heated and ventilated with centralised or decentralised control. Kampmann is completely modernising its unit heaters. As the market leader in this segment, we are responsibly taking a courageous step forwards and, from now on, will be relying systematically on EC technology to power and control our units. There are good reasons for this: — No wasted power — Continuously variable control — Minimum noise levels — ErP-compliant future

TOP C - for the first rays of summer — bring cool air into your warehouse on hot days with the TOP C — offer cooling as an option, even when your client only asks for hall heating — up to now a project-specific solution – the all-rounder now becomes a standard product Multifunctional The demand for cooling buildings is also continuing to increase in industrial climate control. In the system with chiller/heat pumps, the TOP C offers a simple solution for both: removing heating or cooling loads. Continuously variable control Control of TOP C is continuously variable with the cost-effective EC fans to supply the precise output actually required. This also means unnecessary sound emissions are avoided. Fast-reacting The most flexible climate control solution for storage, production, and sales. The fan support ensures fast-reacting heating and cooling of the hall.

Müllers pallet transfer systems and units are available in several types for different applications. Among others we offer automatic feeders for conveying, transfer systems with gate for a process flow in both directions, transfer units with adjustable side walls or fixed side walls. with fixed side walls Standard pallet transfer unit Type PW 800 Loads up to 1000 kg Design: for wooden and aluminum pallets; fixed side walls with motorized adjustable side walls Standard pallet transfer unit Type PW 800 Loads up to 1000 kg Design: for wooden and aluminum pallets motorized side walls with manually adjustable side walls Standard pallet transfer unit Type PW 800 Loads up to 1000 kg Design: for wooden and aluminum pallets manually adjustable side walls with gate for flow in both directions Standard pallet transfer unit Type PW 1000 D2 Loads up to 1000 kg Design: for wooden one-way and aluminum pallets motorized side and end walls automatic sequence Automatic feeder for conveying...