Voltage - Import export

11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm Low cost. Very short. Broad input voltage range. Current output and voltage output. Optional speed measurement. Measurement accuracy: ≤ 0,5% of full scale. Torque ranges from 0,5 to 1000 Nm. Multipurpose use. Contactless transfer of measurement signal. Integrated signal amplifier. Proven strain gage technology. Single power supply.

The new POWER CHARGER units cover various performance stages and charging applications. They can be operated either with a supply voltage of 24 V DC or a line voltage in the range of 85 V – 264 V AC. The output voltage is 75 or 150 watts. A membrane keyboard or an optionally available, integrated touch panel is used to control the generators. POWER CHARGER units can be operated using analog operation or via digital fieldbus interfaces. A control system that uses CANopen and ModbusTCP and other fieldbus standards are available.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. A universal bar with minimal dimensions for supply voltages up to 60 kV. It is used to charge surfaces for blocking and tacking purposes. The charging bar is mainly used where production processes and cycles run faster and with less interference if the materials used (such as films, foils, papers, etc.) adhere to each other. The parallel configuration of two or more bars allows surface-covering charging or operating the unit at high web speeds.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. Heavy-duty precision bar for supply voltages up to 60 kV. The charge and field distribution have been substantially improved by the optimized arrangement of the individual bars. Separate current-limited tips prevent an increase in air ionization and high-energy brush discharges.

In our product area you will discover Eltex charging systems for many industrial sectors. Do you have special requirements, such as small production quantities or little space? Are you interested in solutions for electrostatic charging? Simply contact our consultants – and find the right charging system and solution to optimize your processes with electrostatic charging. Target-specific application of the required charge through the adjustable geometry of the charging points. This arrangement is needed, for instance, for tacking small surfaces (labels) using electrostatic power. Suitable for edge zone fixing during film and foil production.

The DC-voltage converters developed for the electronic components in the motor car are characterised by their ease of installation in every vehicle. The high degree of stability, the compact design, sustained short-circuit resistance as well as the high level of operating safety are the quality hallmarks of this series. The areas of application span the mobile employment of 12-V-consumers in vehicles with a 24-V-onboard network. The devices are particularly suitable for operating car radios, stereo units, radios, cooler units, car telephones, computers, 12-V-trailer lighting etc. The voltage converter converts an input direct voltage into an output direct voltage. The input voltage must be greater than the output voltage. No base load is required at the output end. A 26 kHz PWM switching controller is used for this purpose. Input and output are not isolated. The common earth is connected with the voltage converter housing.

The CSN® SV Viewer (Sampled Values) is our solution for visualizing and recording the digital IEC 6185092 LE Protocol. This software allows the user to visualize the current and voltage values of different Merging Units. The function Values displays the eight current and voltage values. Additionally it is possible to display a DC offset. In realtime mode, a selectable value is shown continuously. The function Phasor calculates the phase shift between the sampled values channels. The function Waveforms charts the sample values of different Merging Units. The user can add or remove the desired sample values. The waveform can be saved as a screenshot or can be printed by the integrated print function. The function Recorder allows the user to record up to two data streams on the hard drive either as .txtfile, Microsoft Excel Spreadsheet or in COMTRADE format. The .txt files can normally be handled by any spreadsheetsoftware; no special analysis software is required.

The CSN® type RCVoltage Dividers consist of a proven reliable and high accuracy resistivecapacitive voltage divider. These are used for voltage measurement for control and protection systems in HVDC links and research institutes. The base for our Voltage Dividers are metal wire resistor webs that have been embedded in epoxy resin under vacuum. In this way, optimal protection against external influences can be achieved. Depending on the installation requirements (outdoor or indoor application), special designs of the voltage dividers adapted on the site requirements are used. The insulation medium (air, N2, SF6) can be easily adapted to the special requirements of the application. Our CSN® RCVoltage Dividers are characterized by

In practice the requirement often arises to convert the measurement signals of a sensor into a standard signal in the simplest possible manner in the immediate proximity of the sensor. This permits trouble-free, low-loss transmission of measured values over longer distances to an instrument board or plant controls. Ideally suited for this purpose is the in-line measuring amplifier, which is inserted in between in the connection cable by means of plug contacts. Owing to its compact, robust design and low weight, it finds use in almost any application. Even movable locations subject to forces of acceleration, for example manipulators, present no problems. It is intended mainly for use of control cabinets in just about any location and is matched to a specific sensor. The aluminium housing is extremely sturdy and affords the greatest possible protection even in harsh environments.

This humidity module delivers an output voltage of 0... 10V which is proportional to the relative humidity of 0... 100%RH. The evaluation of the signal is carried out with an ASIC which results in excellent measurement accuracy and stability.

This high-precision calibration source is able to measure currents up to ±50 mA, voltages ±100 V and temperature setpoint values of 12 thermocouple types, including R, S, B, J, T, E, K and N. Voltage drops across the measuring leads can be easily compensated via the sense line. With “thermoelectric voltage simulation” you can enter °C, °F and K, the temperature scales ITS-90 or IPTS-68 and the reference junction type constant/external. Furthermore, when simulating thermocouples a calibrated external reference junction can be used, with the calibration data being taken into account in the device. The device can be operated both via the keypad and via the Ethernet and USB interface. Features: — DC voltage up to ±100.0000 V, ±0.002 % — DC current up to ±50.0000 mA, ±0.005 % - Thermocouple simulation of R, S, B, J, T, E, K, N, M, C, D, G2 - Automatic sequence function (ramp function)

The precision calibration unit combines high accuracy, low drift, low noise and superior long-term stability with multiple functionality and simple operation. Ramps, Δ+/Δ-, and multiple setpoint storage make the operation of the device easier for the user. For that reason the application possibilities are many: — Calibration of current and DC-voltage meters — Precise testing of thermocouple temperature measuring instruments — Calibration of controllers, sensors, detection devices and other devices used in process control — Open-loop process control with the aid of integrated ramp function Features: — High precision current and voltage source ± 52 mA, ± 30 V — Option: ± 22 mA, ± 60 V — Precision simulation for all conventional thermocouple types (optional) — Error limit 0.003 % Rdg. — Standard with RS232 and IEEE488 interface, USB and Ethernet (optional) — Current "SINK"

The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results. If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.

The µCAN.4.ai-F1 is the versatile universal measuring module for analogue standard signals. The module is designed to measure +/- 40 V or -20…+20 mA signals at an overall sampling rate of 4 kHz.

1800 Nm max. on 1 3/8“ shaft according to ISO 500-3:2014 Type 1 On request also available: 1800 Nm max. on 1 3/8“ shaft according to ISO 500-3:2014 Type 2 2500 Nm max. on 1 3/4“ shafts according to ISO 500-3:2014 Type 3 contactless signal transmission built-in measuring amplifier rotation angle measurement (optional) extended EMC strength adjustable output level of rpm and angle signal (5V-24V) Frequency output 10kHz ±5kHz large input voltage range (10-28,8V) strain gauge technology robust design for use in field applications IP67 easy installation accurate results (0.2% accuracy) The torque sensor DRVZ provides a precise measurement of torque and angle of rotation when testing systems that are driven by PTO shafts, such as a tractor gearbox.

The cable transmitter module µCAN.1.ai-TRS is designed to acquire one analogue measurement signal. The TRS module is integrated directly in the measurement line where the analogue signals are digitized and transmitted to the processing unit via CAN interface.

The modul µCAN.4.ao-SNAP features four independent analogue outputs which optionally provide a voltage or a current signal. The CAN interface supports CANopen and J1939 protocols.

The measurement data acquisition module µCAN.1.ai-SNAP acquires analogue measurement signals and links them to the digital CAN world.

The µCAN.4.ai-BOX is an extended universal measurement module for the acquisition of analogue standard signals. The device is designed for measuring signals of +/- 10 V, 0…20 mA or 4…20 mA. The CAN interface supports the protocol CANopen.

The µCAN.1.ai-BOX is a decentralized universal data acquisition module for analogue standard signals (current / voltage). The CAN interface supports the protocol CANopen.

Our High-voltage resistors resp. High ohmic resistors are a available as flat and tubular resistors, in various series and as adjustable high-voltage potentiometers.

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate.

• Contactless voltage tester with flashlight • For AC • With voltage field sensor for non-contact detection of alternating currents with visual indicator (red LED), voltage range 90 - 1000 V, e.g. in cable connections, wall sockets, junction boxes, circuit breakers & fuses and many more • Integrated flashlight for measuring point illumination • Pushbutton for switching on, with self-test and visual "ready" lamp (white LED) • Device complies with the EN61010-1 standard • Measurement category CAT III / 300V • Compatible with all pliers & cutters with SoftGripp handles • With eyelet for securing to e.g. lanyard • Housing made of made of plastic • Batteries included • Read operating instructions before commissioning

Ranges: 0..6 A/ 0..60 A AC 12 measuring ranges, switchable Activatable averaging

Measuring ranges 0..1 A / 0..5 A AC 1 and 2 channel version Frequency range 45..400 Hz

Panel installation housing, IP 67 Input signals of external sensors 4..20 mA/0..10V / 2 x push pull LCD lighting, mineral glass

Twopole and singlepole auxiliary voltage transformers designed to supply control cubicle with low voltage power.

The charging generator CG 202 optimally supplies every charging component of KERSTEN Electrostatik. It delivers a regulated (digital PID control) output voltage of maximum -25kV. The power supply is independant of the world’s varying supply standards by using an input voltage of 24V DC ±10 %. Four charging components can be connected to special high-voltage plug-in connections. Operating parameters are displayed and storable via graphic display and foil-keypad, or can be taken from an industry-standard current interface. Both can be used to operate the system. In addition, an optional discharging generator can be connected to and controlled via the generator.

In addition to pressure, temperature, rotational speed and flow measurements, the Hydraulic Testers can measure and evaluate different signals from other or third-party sensors. Measuring electrical signals from third-party sensor (e.g. 4 ... 20 mA, 0 ... 10 V, ...) with the PPC-06/12-A/V-A Adaptor. The PPC-06/12-A/V-A Current/ Voltage Adaptor is used, for example, for measuring current at proportional valves or for determining the switching states of motors or pumps and to evaluate and process measurements from third-party sensors. Typical applications are the generation and measurement of a force-distance graph or torque-flow characteristics curves. The following input signals can be processed by this adaptor: ▪ Electrical currents up to 4 A DC ▪ Electrical voltages up to 48 V DC The measured data are transmitted directly to the Hydraulic Testers by a permanent cable connection.