Results for
EMBRO GMBH
Germany
When it comes to seat heaters, we at Embro think first and foremost of the textile processors of vehicle seats. Because our textile heating elements are in great demand in the automotive industry. They are easy to process, flexible, and kink-resistant. The heat output is individually adapted to the customer’s requirements in the development process and suitably distributed and laid out on the desired surface (wire laying). With the increasing number of electric vehicles being produced, the demand for further heating solutions for the interior area is also rising. Embro heating mats heat the seats and interior via heating elements in the center and side armrests and trim parts. As a developer or engineer in the automotive sector do you need a specific heating element for a product? We are looking forward to your ideas!
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the parts made by aluminum,after machining then doing anodized Golden.
Request for a quoteSTÄHLE GMBH
Germany
Pneumatically operated actuator for operation of accelerator handle. External set-point of the pedal actuator position via analog voltage to closed-loop pressure regulator in external valve box. Fast, simple and robust installation on vehicle driver seat. EMC resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. Due to the pneumatically operation there are no electrical wirings into the vehicle and no EMC emissions. The actuator uses non-metal materials were possible. The system can be expanded by additional pneumatically operated actuators for brake, clutch , ignition key or push buttons.
STÄHLE GMBH
Germany
Actuator for precise operation of accelerator and brake pedal in vehicles. External set-point of the scaled pedal position or brake force via analog voltages. Fast, simple and robust installation on vehicle driver seat. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. The system can be expanded by additional actuator for and clutch as well as pedal force measurement. Other interfaces like field bus can be offered.
STÄHLE GMBH
Germany
Actuator for precise operation of accelerator pedal in vehicles. External set-point of the scaled pedal position via analog voltage. Fast, simple and robust installation on vehicle driver seat. Temperature resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. The system can be expanded by additional actuators for brake and clutch as well as pedal force measurement. Other interfaces like field bus can be offered.
Do you sell or make similar products?
Sign up to europages and have your products listed
STÄHLE GMBH
Germany
Pneumatically operated actuator for operation of accelerator pedal of motorcycles and 2/3 wheelers. External set-point of the pedal actuator position via analog voltage to closed-loop pressure regulator in external valve box. Fast, simple and robust installation on vehicle driver seat. EMC resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. Due to the pneumatically operation there are no electrical wirings into the vehicle and no EMC emissions. The actuator uses non-metal materials were possible. The system can be expanded by additional pneumatically operated actuators.
STÄHLE GMBH
Germany
Pneumatically operated actuator for operation of accelerator, brake and clutch pedal in vehicles. External set-point of the pedal actuator position and brake pedal force via analog voltage to closed-loop pressure regulator in external valve box. Fast, simple and robust installation on vehicle driver seat. EMC resistant actuator in fail-safe design with mechanical, spring-actuated return to idle position in power-less situation. Due to the pneumatically operation there are no electrical wirings into the vehicle and no EMC emissions. The actuator uses non-metal materials were possible. The system can be expanded by additional pneumatically operated actuators for ignition key or push buttons.
ATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
Testing of assembled components provides an advantage for evaluating the combination of potentially incompatible materials. An Atlas Walk-in allows testing of oversized samples and assembled components, such as motorcycles, electrical panels for outdoor use, household appliances, vehicle seats, pressurized cyclinders, bicycles, military items, ranch and farm machinery, snowmobiles, window/door assemblies and much more. Installing MH (metal halide) or MHG (metal halide global) luminaries in Atlas Walk-in chambers increases the testing capabilities for any lab. NOW, entire assemblies and oversize samples can be tested for UV resistance, corrosion and other environmental conditions in the same unit. PlexiglasTM viewing window in door Inside safety latch for door Interior liner with sheet PVC for uniform thickness Raised interior floor to accommodate drainage Floor covered with rubber sheet or plastic mat PlexiglasTM access port Interior light with switch on exterior wall Ambient to 120 °F (49 °C) exposure tone temperature Interior shell of mild steel, primed on both sides Testing Volume: 7,136 Litres - 11,893 Litres (depending on size of chamber) Exposure Zone Dimensions: L x W x H : SF7000 - 6' x 6' x 7' (1.83m x 1.83m x 2.13m) ; SF9500 - 8' x 6' x 7' (2.44m x 1.83m x 2.13m) ; SF12000 - 10' x 6' x 7' (3.05m x 1.83m x 2.13m) External Dimensions: L x W x H: SF7000 - 7' x 7' x 9' (2.13m x 2.13m x 2.74m) ; SF9500 - 9' x 7' x 9' (2.74m x 2.13m x 2.74m) ; SF12000 - 11' x 7' x 9' (3.35m x 2.13m x 2.74m) Sloped ceiling prevents dripping of condensation onto samples Microprocessor-based cycling controls for basic cycling testing Fog stripper, manual operation Timer for bubble tower Precision air regulator Solution spray with multiple nozzles UL approval External condensate collection package High voltage kit (over 460 VAC) High capacity oil & water extractor Custom sizes (extra height / any LxW / drive-in or drive-through with overhead door) and configurations (pass-through electrical/mechanical ports)
RÜHL FEUERLÖSCHMITTEL GMBH
Germany
Flexible foams are elastic PU foams that are used in many different applications thanks to their usually excellent padding properties. In addition to the seating furniture industry, applications include motor vehicle and rail vehicle seats. However, they can also be used in seals and loaded damping components. Typical properties Moulded part density of 40–250 kg/m³ Adjustable compression load deflection Dimensional stability under heat up to 100°C Water is usually used as the foaming agent, but liquid CO2 is also possible Special formulations and versions Viscoelastic Barium sulphate loaded for acoustic applications, e.g. in aviation FIPFG seals for PU high-pressure processing Dimensional stability under heat up to 150°C in special applications Emission-free pursuant to RAL-ZU 38 Flame protection formulations Automotive: FMVSS 302 Rail vehicle construction: DIN 5510 (S3, SR2, ST2), EU TL 45545 Aircraft construction: ABD 0031, FAR 25.853 Furniture industry: California 117 Section A Part 1
Request for a quoteResults for
Vehicle seat - Import exportNumber of results
10 ProductsCountries
Company type