Valve locking - Import export

manual control with 3l or 10l reservoir made for low viscosity lubricants mechanical locking valve with manifold optional electropneumatic locking valve

all nozzles are equipped with locking valve to prevent dripping after shutoff all nozzles come with fitting for the PressSpray hose P940

Stop valves for shutting off and locking in the event of an unintentional drop in pressure. Pneumatically unlockable, for direct installation in the cylinder air connection.

Product information "Stand-up pouches, black matt with aroma valve, high barrier" Stand-up pouches, coffee bags, aroma protection packaging: with valve, black matt, with pressure lock - High Barrier These stand-up pouches are the little black dress for your products. The matt black surface gives the bag a very elegant touch. You can be sure that this bag will not fail to impress when it is on the shelf! Your customers' attention is certain. Our stand-up pouches are standing pouches and are particularly suitable for filling flavored, ground, small-scale or powdered products such as salt, rice, spices, decorative sand and much more. These bags are often used for roasted coffee. But other uses are also possible. The valve lets the air out only from the inside. The snap closure makes the bag resealable. The bag also has rounded corners, tear notches and can be sealed above the sealing lip to guarantee tamper evidence.

The liquid and soot-free organic lighter for grills, fireplaces or fondue. Safe and clean ignition for a guaranteed natural taste. Safe handling thanks to the patented non-return, flame and explosion-proof valve with child safety lock. Other sizes available on request

Throttle Check Valves for In-Line Assembly DRV ▪ Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction) ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Check Valves for Manifold Mounting DRVP ▪ Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction) ▪ Designed for manifold mounting with either 4 or 6 mounting holes ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI

Throttle Valves for In-Line Assembly DV ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Valves for Manifold Mounting DVP ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for manifold mounting with either 4 or 6 mounting holes ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Valves for Cartridge Assembly DVE ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for direct installation into...

Technical data cube with pressure transducer and lock valve Pressure needs detection with switch-off upon reaching the required working pressure of 20 bis 850 bar Suitable for all tools with a oil flow to 700cm³ With built-in-pressure sensors for enhanced features and advanced settings Jogging for intermittent tool feed Power stepless adjustable, short time possible to 1,2 kW For Network and battery (24/230V) Powerful Li-Ionen battery 24 V 4,8 Ah The unit is designed so that the battery capacity is sufficient for one working day. Integrated charger Energy savin mode – Unit switches off 10 minutes after the last activity, or to low battery charge Keeps the pressure of max. 850 bar upon actuation of the stop valve Robust plastic housing Controls and coupling are set back behind the front edge of the housing Flow rate: automatically adjust to 1l/min Size L/B/H: 215 x 165 x 220mm (Handle height 40mm) Weight: ca. 6,9 kg The lock valve for pipe crimping tools prevents reduction of oil pressure in the tool. So it is possible to hold hydraulic pressure over not time limited space. Supplied with Hydraulic power unit 3m Remote control 3m Power charger adjustable shoulder strap instruction manual

Application The Hunger RDS is designed to precision machine the seat ring bores in cylinder heads to produce smooth and closely fitting contact surfaces for oversize seat inserts. Features The RDS is equipped for counterboring as well as for facing the bottom of seat ring bores in a lathe-type action with a single point carbide cutter. The RDS is aligned in centerline with the valve guide by means of a pilot which is locked in the valve guide. An universal steady stabilizes the RDS against lateral displacement. Pilots and steady furnished with Hunger valve seat refacing tool also suit for the corresponding RDS tool. The built in feed gear mechanism for automatic longitudinal and cross feed of the single point cutter eliminates the need for multiple cutter sets and other accessories. An adjustable stop for the tool slide permits quick selection of the proper sized bore diameter.

By means of the moveable container with the mixed material, container with separate trolley, will be positioned in the tumbling mixer. The moveable container will be lifted by a pneumatic stamp. The trolley will be fixed in the tumbling mixer by means of a pneumatically actuated draw-in device. The head of the tumbling mixer formed as a container, fixed on the mixing head with four pneumatically operated clamping jaws including forklift pockets and discharge valve. The lifted container is locked to the tumbling head by means of pneumatically actuated locks. After fixing of the container at the tumbling head a SPS controlled tumbling process starts.

The Hartmann pig valve provides a space- and cost-saving substitution for expensive pig launching systems. In addition to its classic use as shut-off valve, it functions as pig launcher or receiver. The simple, secure, and fast insertion or removal of scrapers take place through an interlock that is integrated on the side of the valve and locked and secured through a bayonet system. An optional bypass in the closed position also allows cleaning operations when the medium flow is not to be interrupted completely. Also separating different products in a pipeline is possible. A 3-step, redundant safety concept and an entirely metallic sealing shut-off guarantee highest availability for operation and cleaning of oil, gas, slurry and water applications. Special designs are available: e.g. 180° pigging valves which can act as launcher and receiver in both directions, or pig valves for extended scraper lengths than the standard 1.4 x nominal diameter of the pipeline.