Vacuum dryers - Import export

The laboratory vacuum shovel dryer DRUVATHERM® is a system provides reliable scale-up to production scales in the context of product and process development and can likewise be used for small batch production too. The Lödige laboratory vacuum shovel dryer DRUVATHERM® is a horizontal, batch vacuum dryer with a frequency-controlled mixing tool. This mixer consisting of mixing elements adapted to the process and arranged on a shaft according to a specific system - is installed in a cylindrical mixing drum equipped with a temperature control jacket. Rotation of the mixing unit generates a three-dimensional product movement, in which all of the product is constantly in motion. The contact frequency of particles with the heat exchange surface leads to shorter drying times. The chopper rotating at high speeds fitted to the side of the mixing drum is used to disperse the product . This leads to a significant increase in drying capacity and prevents moisture and temperature gradients.

Lödige shovel dryers are batch vacuum dryers. The mixing elements are frequency-controlled for ideal adaptation to the process. Special rotating mixing elements, installed in a cylindrical drum equipped with a temperature control jacket, create a three-dimensional product movement . The resulting contact frequency of the particles with the heat exchange surface leads to incredibly short drying times. The intelligent product movement ensures intense contact of individual product particles with the heated container wall while also providing very gentle product treatment. The chopper rotating at high speeds is used to disperse the product during transition between phases. Product surfaces are opened up during this process. This leads to a significant increase in drying capacity and prevents moisture and temperature gradients. Fine particles pulled along by solvent vapours are separated in the filter and returned to the product bed through pneumatic filter cleaning.

KET energy-efficient dryer with heat pump and buffer 20 m³ - 60 m³ stacking space The KET has an energy-saving heating system. The heat pump is the heart of the plant, it heats and cools. The cooling system condenses the moisture escaping from the wood and uses the heat this produced to heat the system. The system is supplemented by a buffer which makes use of the stored heat to heat up the vacuum dryer. Increases energy efficiency by 25 % Surplus energy from drying is used for heating The heat pump is used in the heating up phase for heating and demoisturizing No water connection required No heating connection required Areas of application: Sawmills, lumber and hardwood trade, wood industry

KCT circular vacuum dryer 20 m³ - 60 m³ of stacking space The KCT is characterizedby the advantageous arrangement of its valves. It can easily be connected to existing heating systems and requires but very little heating power. Energy: hot water or electric heating Putting fan on side enhances its performance Measuring point cables on carriage Active cooling in the equalization phase Detection of condensed water Heat and cold registers made of stainless steel Areas of application: Sawmills, lumber and hardwood trade, wood industry

KVT vacuum dryer with 5 m³ - 10 m³ of stacking space The KVT is characterized by its simply demoisturizing system by way of the vacuum pump. Putting the fans on the size – as in the larger circular dryer – enables the side stakes of the stored wood to be used. Re-stacking is no longer necessary. The vacuum dryer is connected to the hot water heating system already in place or run by direct electric heating. Dries valuable wood thicker than 50 mm 3-5 times as fast Lower energy requirement thanks to short drying times No cracking and no distortion owing to low temperatures in the vacuum No emissions thanks to environmentally compatible drying Uniform ventilation thanks to fans on side No re-stacking on special stakes through cross-ventilation Areas of application: Furniture industry, carpenters

The KCT, KET, KVT and KIT model vacuum dryers with additional equipment for heat treatment in compliance with IPPC All vacuum dryers from Kronseder can be additionally equipped to perform heat treatment in compliance with IPPC. Up to 6 sensors are available for heat treatment, whose measured values are stored for a protocol by the visualization of the Kronseder MK 200 control.

KCT circular vacuum dryer with additional equipment for smoking oak 10 m³ - 40 m³ of stacking space The KCT Eurovac circular vacuum dryer conforms to the requirements for smoking. The measuring equipment and the control valves are made of stainless steel. As is the carriage with rollers. The vacuum pump meets ATX requirements. The vacuum chamber is equipped with a ventilation system so that you can evacuate the ammonia at the end of the smoking process. The MK 200 control from Kronseder meets the requirements of the smoking process and controls the process for optimum coloring.

Vacuum drying Using the vacuum method to dry lumber improves its quality. The water is removed even from the core of the wood and the low temperatures dry the lumber gently.

Braid of ePTFE yarn with Incorporated Graphite and Run-In Lubricant Characteristics Excellent heat conductivity Maximum protection of shaft against wear (HRC 25 is sufficient) Extended MTBF Easy and safe installation and handling No ageing process Operating range Pressure [p max]: 25 bar, Velocity [v max]: 25 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 100 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.50 g/cm³ Main application Centrifugal pumps Mixer Agitators Autoclave Filter Refiner Kneader Paddle dryer Vacuum pumps Suitable for Universal use Waste water technology Acids Alkaline solutions Oil and grease Form of delivery This packing can be manufactured in dimensions from 10 to 40 mm as well as in intermediate, inch sizes and special measurements. Available from 4 to 9 mm in square X-Section as Style P1P. 04 - 09 mm on 1kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5 kg spool Special length, pre-cut or die formed rings on...

COMBER Turbodry® - Series TD 0.8/1.1 - TD 40/60 The Turbodry agitated vacuum pan dryer has proven to be excellent for the drying of sensitive, pasty and other “diffcult” products that pass through a highly viscous stage during the drying process. The dryers have proven to be particularly suited for the drying of heat sensitive products as well as products with fragile crystal structure and thus sensitive to shear forces. Excellent product discharge and shortest cycle times. Special properties for the customer’s benefit: In compliance with cGMP and FDA guidelines, also in aseptic/ steam sterilizable versions Shortest possible drying times, suitable for the drying of sensitive, pasty, sticky and other “diffcult” products such as those turning highly viscous during the drying process Simultaneous axial and radial agitator movements permit uniform mixing of the entire product mass, without the formation of lumps or balls Double mechanical seal, dry running contacting or...

COMBER Condry® - Series TDC 25 - TDC 15000 The Condry conical bottom agitated vacuum dryer was developed to process a wide variety of products. The machines have proven to be particularly suited for the drying of heat sensitive products as well as products with fragile crystal structure and thus sensitive to shear forces. The conical bottom allows for full product discharge characteristics. Special properties for the customer’s benefit: In compliance with cGMP and FDA guidelines, also in aseptic/ steam sterilizable versions Excellent product discharge performance with negligible product hold-up due to the conical vessel bottom, very close agitator to wall/bottom clearances and a unique agitator design The agitator permits uniform mixing of the entire product mass, without the formation of lumps or balls The surface area for heat transfer is maximized for optimum performance and cycle times Agitator supported by the top head, with the seal in contact with the vapors only Entirely...

COMBER Pharmadry® - Series PH 50 - PH 4000 The Pharmadry vacuum paddle dryer with short drying times is well suited for the drying of freely flowing, sensitive pharmaceutical ingredients and fine chemicals. Designed to meet stringent cGMP and FDA guidelines. Special properties for the customer’s benefit: In compliance with cGMP and FDA guidelines, also in aseptic/ steam sterilizable versions Agitator supported at the rear, with externally exchangeable mechanical seal Entirely welded agitator design, without any bolts, without pockets and with all edges rounded for good cleanability Minimal build depth, thus very good accessibility for inspection and cleaning purposes Excellent cleanability using CIP systems, simple validation Available with separating wall between process and mechanical areas Double mechanical seal, externally interchangeable, dry running contacting or non-contacting lift-off type seals as well as liquid lubricated seals

COMBER Pressofiltro® / Turbodry® Series PF/TD 5 - PF/TD 100 This Pilot Plant can either be used as Agitated Nutsche Filter/Filter Dryer or a Vacuum Dryer. Designed for processes in pilot plants, it is fully equipped for tests and trials and can as well be used for small scale production. Special properties for the customer’s benefit: Calculation, manufacture and design are in accord with Pressure Equipment Directive 97/23/EG or/and ASME U-stamp as well as with cGMP and FDA guidelines Approved for using in ATEX danger zone, group II 2G 2D (zones 1/ 21) Suitable as vacuum dryer, filter dryer or agitated nutsche filter Shaft seal through gland nut Device built on skid Control system protected against explosion (EEx-d) Options Multilayer PLC-system

Series MF 010 - MF 1200 The BOLZ-SUMMIX conical screw dryer is a vacuum contact dryer. Due to its contained closed system and indirect heating of the product it is particularly suited for drying hazardous and toxic products to a very low final moisture content. As a result of its unique, very gentle mixing character, even mechanically sensitive products are not destroyed. The product quality after the drying process is reproducible and as good as that of the initial product, whereas the driving forces required are very low. The achievable, high endvacuum ensures low drying temperatures which is a clear advantage when drying temperature-sensitive products. It also ensures good heat transfer rates and short drying times, while at the same time requiring only little energy. The short drying times and the high containment level of the fully closed system make the conical dryer the best choice in instances where environmental and/ or product requirements are strict and remarkably...

COMBER Termomix® Series TM 1000 - TM 40000 The Termomix vacuum paddle dryer/reactor is intended for monoproduction applications or bulk production facilities as mixer, reactor, precipitator and dryer. Special properties for the customer’s benefit: Economic, robust multipurpose machine for heavy industrial applications The agitator is supported on both ends providing excellent mixing characteristics, with externally interchangeable stuffing boxes or mechanical seals Large heating area resulting in an outstanding heat transfer rate by heating the vessel walls, the vessel ends as well as the agitator shaft and arms

Description Termomix TM 100 Year of construction 1984 Manufacturer COMBER Product contacted material AISI 316 Support frame Yes Seal design PTFE Total volume (l) 120 Useful volume (l) 90 Agitator drive (kW) 5.5 PED No ATEX No Vessel diameter (mm) 450 RPM (min-1) 8 – 38

Description Condry TDC 800 Year of construction 2011 Manufacturer Comber Serial No. 3323-A Product contacted material AISI 316 L

Description Pharmadry® PH 2000 Year of construction 2017 Product contacted material AISI 316 L Material of seals Blue Gylon 3504 Vessel diameter (mm) 1,480 Total volume (l) 2,120 Useful volume (l) 1,590 Agitator drive (kW) 22 Speed range (rpm) 5 – 52 Mechanical seal Lip seal, gas lubricated (Interseal) PED Yes ATEX Yes Design temperature (° C) -20 / +150 Dust filter (m²) 2 Nitrogen tank (l) 12 Main motor (kW) 22 Gear box (kW) 1.5 Lumps breaker (kW) 5.5

BSV Series DN 100 – 400 The Ball Segment Valve, BSV for short, is the result of a development of an innovative valve for pharmaceutical and fine chemical processes. For a wide range of solids applications, it is the preferred valve for process equipment like vacuum dryers, reactors or centrifuges as both as inlet and discharge valve. Even if products are not free flowing, have an abrasive effect or have moist and adhesive properties, the Ball Segment Valve is the right choice as a reliable, vacuum and pressure-tight process valve. The internal corner-free and edge-free housing does fullfill your cGMP requirements and leaves the ball segment sufficient space to move clear of the product flow path when opened. A reactor agitator or mixing tool can be designed to move within a few millimetres of the Ball Segment Valve virtually eliminating dead-space in the process area. Besides the standard flanges, the BSV can be equipped with tailored and non DIN flange connections to suit most...

KIT vacuum interval dryer 1,5 m³ - 4,50 m³ of stacking space This energy-saving system works on the principle of conventional drying with an inlet air flap and outlet air flap. Used for quickly demoisturizing the vacuum pump. Dries valuable wood thicker than 50 mm 3-5 times as fast Dries valuable wood thicker than 50 mm 3-5 times as fast Lower energy requirement thanks to short drying times No cracking or distortion through lower temperatures in the vacuum Longitudinal layout makes best use of space Areas of application: Carpenters, musical instrument makers, weapons industry, lathe work