Uv radiation - Import export

Because most polymers can be damaged by UV radiation, UV protection is required in many application areas. This can be achieved by two different modes of action UV absorption by converting UV radiation into thermal energy, UV absorbers form a protective film that protects the polymer and the packaged item from damage. UV stabilization the addition of UV stabilizers can prevent polymer damage and increase its durability.

SYSTEM SOLUTIONS FOR GAS STORAGE With the Lipp gas holder Lipp offers a tried and tested system solution which is complete in itself, for unpressurised storage of biogas, sewage gas and landfill gas. This solution is chiefly used for municipal waste water treatment plants and landfills. Due to its design, as well as high functional and operational safety, it also ensures low maintenance costs over a very long service life. This is mainly because the sensitive gas holder is protected against UV radiation and other environmental influences by a steel container manufactured with the Lipp dual seam system. Furthermore, this construction method allows an exact leak test and highly accurate metrological monitoring of the gas fill level. Both aspects are essential for safe and efficient plant operation. With certification according to § 19 WHG for Lipp GmbH and DVGW approval of the gas storage tank, further conditions are met for use in municipal waste water treatment plants.

Stainless steel containers with digester chamber volumes from 100 to 10,000 m3 Gastight cover, with or without a gas accumulator Individually customisable Durable due to high quality materials Ideal for the collection of residual gases or for improving efficiency Homogenisation device to suit the task in each case Integrated gas accumulator with optional wind, weather and UV radiation protection

INOX UV Booster serves to protect lubricants from undesirable, light-induced aging effects. UV stabilizers are used here preventing the occurrence of discolouration of the lubricant after long storage and exposure to UV radiation.

The butter is extracted from the pure seeds of the fruit to obtain raw, filtered and unrefined butter. Also available as organic or deodorized butter. Rich in essential fatty acids, it helps to combat the action of the sun, absorbing UV radiation. Thanks to its high levels of lanolin, it acts as a moisturizer for the skin, moisturizing it and reducing water loss, thus delaying the appearance of wrinkles.

It is a product obtained by hot extraction of roasted and chopped seeds (nibs) of Theobroma cacao. It is pale yellow in color. For food and cosmetic applications Food: Cacao butter is used to make chocolate. Cosmetics: Rich in essential fatty acids, it helps fight the action of the sun by absorbing UV radiation. Thanks to its high levels of lanolin, it acts as a moisturizer for the skin, moisturizing it and reducing water loss, thus delaying the appearance of wrinkles.

The self supporting, lightweight diaphragm construction made of stainless steel – with high mechanical strength and resistance to ageing – enables tanks with diameters of up to 50 m to be spanned. The stainless steel not only provides support but also seals off the tank and can withstand snow loads and high winds. The Lipp stainless steel diaphragm cover is corrosion resistant, gas and vapour diffusion tight and provides reliable protection against UV radiation and mechanical damage. The lightweight design of the diaphragm makes it ideal for covering volatile and explosive substances and prevents components from flying around in the event of an explosion. Prefabrication of the diaphragm at the factory eliminates the need for welding work to be carried out at the construction site.

OKS 1105 prevents the formation of electrically conductive layers and minimises the risk of flashovers and dielectric losses. The insulators and switchgear covered with the paste thus maintain a good insulation resistance. Sealing lubrication for electrical or electronic equipment such as relays, plug-in connections, cable lugs and lamp sockets Protection of insulators and switchgear in humid atmospheres, for example of junction boxes, screw terminals, overload cutouts at high-voltage pylons, connecting cables and terminal connections Lubricant for plastic screw connections and other moving parts of metal, ceramic, plastic Advantages and benefits Excellent water repellent properties Excellent surface wetting Good adhesion on glass, porcelain and plastics Stable consistency across a wide temperature range Very good resistance to chemical and weather-based influences (e.g. ozone, UV radiation) Neutral with regard to many materials

All the PVC and PU coatings on Forbo’s conveyor and processing belts (Transilon/Transtex) are made with UV-stabilizing recipes. Premature ageing due to the impact of UV-C radiation (with cracks forming and a tendency to rupture) is now reliably prevented. The belt surface remains intact, isn’t contaminated and is still easy to clean. Because it’s very fast and easy to use, UV-C disinfection plays a key role in hygiene technology. Conveyor belts without any UV protection are only of limited use in the process. — exceptionally hygienic due to enhanced ingredients — very easy to clean due to intact surfaces — economical operation due to long service lives Application examples: Intralogistics Food industry Baggage handling

Vitamin E is one of the fat-soluble vitamins our body needs but cannot produce itself. It therefore relies on sufficient supply through nutrition. As recently confirmed by the EFSA (European Food Safety Authority) vitamin E as an anti-oxidant makes a contribution towards protecting the cells against oxidative stress. Oxidative stress can be caused by smoking, increased UV radiation or other environmental influences. Each Vitamin E 200 I.U. capsule contains 134 mg natural Vitamin E., corresponding with 200 International Units (I.U.).

“Robbyrob Distilled Water” - deionized, UV irradiated, chemically pure. No lime deposits. Robbyrob distilled water is deionized, UV-radiated, chemically pure, and complies with DIN 43 530 (VDE 0510) and EN 285. For use in the home for steam irons (no evaporation spots), humidifiers, radiator evaporators, for spraying and watering indoor plants. For the car windscreen washer to dilute windscreen cleaner concentrates, for the car radiator, and to refill the car battery. Other areas of application are laboratories, cosmetic studios, hobbies and camping or for mixing in aquariums. No lime deposits. Other sizes available on request

5-ALA is an active pharmaceutical ingredient and is produced under cGMP. Values are: * Competitive process * European manufacturer * Registered and approved in EU and US 5-Aminolevulinic acid is an amino acid that belongs to ketocarbonic acids. It is increasingly converted into a red fluorescent molecule in tumor cells. This accumulates in tumor cells about 4 times more than in healthy cells. The substance is a photosensitizer, it can form oxygen radicals with light energy. These radicals destroy the cell, which is why 5-aminoleivulinic acid is used, for example, in skin carcinomas caused by UV radiation.

The RJ45 connector is the most used interface in data communications. CONEC has, based on this connector interface, designed a rugged versatile connector system for Cat. 5e and Cat. 6A, that ensures reliable protection and the convenience of easily mating under the most difficult and harsh environments. The housing with bayonet coupling mechanism is in compliance with IEC 61076-3-106 and provide increased protection for the connector system against contamination and moisture (IP67 rating). Furthermore, the increased demands for mechanical stability, temperature resistance, vibration immunity and protection against EMI and UV radiation will be fulfilled. This program is supplemented by preassembled patch cables with IP67 rating in various lengths and designs. The zinc die-cast version provides an excellent protection against harsh environment.

Nominal volume: 10 L + with folding, zinc-plated, corrosion-protected steel wire carrying handle + resistant to frost, heat, UV radiation and chemicals + available in green and brown + integrated stacking ribs allow for stacking of the trash/garbage cans + the container’s smooth surfaces are easy to clean + environmental protection: Our pre- sorting containers can be fully recycled at the end of their useful life.

UV radiation dryers are particularly suitable for UV-hardening paints. Ultraviolet drying process UV drying is a polymerisation process which is triggered by UV light. The process is primarily used for drying flat substrates, wood and furniture paints, overprint varnish on paper, printing inks etc. The process is environmentally compatible and of a particularly high quality. UV paint would never dry without UV light.

Nominal volume: 120 L Nominal loading capacity: 48 Kg + manufactured in accordance with the specifications of DIN EN 840 and RAL GZ 951/1 using the compact injection moulding process + produced from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to UV radiation, high and low temperatures as well as chemicals + standard emptying by stepped comb-lifting device (shape A), reinforced by additional ribs + equipped with two solid rubber maintenance-free wheels (standard diameter 200 mm) + zinc-plated continuous steel axle, corrosion-proof + drip edges on the inside of the lid prevent the escape of evaporating liquids + available in grey (black), green, brown, yellow, blue, etc. + ribbed chipnest, compatible with the most-widely-used ID and weighing systems, for secure mounting of transponders/data carriers + complies with the requirements of EC directive 2000/14/EC and is marked with both the CE symbol and the appropriate noise level (LWA)

Nominal volume 60 L Nominal loading capacity 40 Kg + manufactured by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + the waste bins are manufactured from specially developed, high molecular weight, high-density polyethylene (HDPE) + resistant to frost, heat, UV radiation and chemicals + stepped comb-lift + with continuous handle for easier handling + external 200 mm diameter wheels ensure stable running + zinc-plated steel axle, corrosion-proof + all usual colours and combinations (e.g. grey, brown or green) available + smooth inside and outside surfaces of the waste recycling bins prevent adhesion of waste; this simplifies cleaning of the container + ribbed chipnest for secure mounting of transponders/data carriers (RFID chips); compatible with the most widely-used weighing and ID systems + mobile waste bins comply with the requirements of EC directive 2000/14/EC and are marked with both the CE symbol and the appropriate noise level

Nominal volume: 660 L Nominal loading capacity: 270 Kg + manufactured by compact injection moulding process from high molecular weight, high-density polyethylene (HDPE) in accordance with the test + regulations of DIN EN 840 and RAL GZ 951/1 + resistant to frost, heat and chemicals; stabilised against UV radiation + standard emptying options of either DIN or comb-lifting device; optionally with Ochsner handles of zinc-plated steel + quiet-running, full rubber heavy-duty castors of 200 mm diameter, 360° swivel range + wheel stop brake system (dual stop) as standard feature; alternatively available with central braking system + zinc-plated, corrosion-resistant metal parts + frontal comb is equipped with a chipnest to accommodate data carriers in accordance with DIN 30745 and RAL GZ 951/1 + optimised for high stacking with strong stacking ribs + drain plug in the bottom facilitates cleaning + available colours: grey, blue, brown and green

The new Phosgen indicator badge MEDIC fully complies with the latest scientific findings in industrial healthcare. It is easy to use and favorably priced. A PET orifice protects the color reagent from poisoning, UV radiation, splash water, and corrosive gases. Thus it can be used for 5 days even in rough industrial environment.

Broadband radiometer for radiation protection measurements of UV radiation devices. Features: Mobile ligh meter for UV radiation while working with artificial UV (UVSV). Erythema effective irradiance and detection of UV-C radiation in accordance with the UV protection Act for solaria. UVSV, DIN EN 60335-2-27 and DIN 5050-1:2010-01 conformity.

Detector head for use in UV radiation protection measurements. Features: UV-A and UV-BC actinic ICNIRP irradiance, for usewith X1 type optometers, DIN EN 12198.

Detector head for use in UV radiation protection measurements. Features: UV-A and UV-BC actinic ERYTHEMA irradiance, for usewith X1 type optometers, calibration certificate.

Detector head for the measurement of irradiance of UV radiation in W/m². Features: spectral responsivity from 280-315nm (UV-B), cosine field-of-view, for the usage with optometers and amplifiers, calibration certificate.

Detector head for the measurement of irradiance of UV radiation in W/m². Features: spectral responsivity from 280-320nm (UV-B), cosine field-of-view, for the usage with optometers and amplifiers, calibration certificate.

Detector head for the measurement of irradiance of UV radiation in W/m². Features: spectral responsivity from 320-400nm (UV-A), cosine field-of-view, for the usage with optometers and amplifiers, calibration certificate.

Detector head for the measurement of irradiance of UV radiation in W/m². Features: spectral responsivity from 200/250-280nm (UV-C), cosine field-of-view, for the usage with optometers and amplifiers, calibration certificate.

Detector head for the measurement of irradiance of UV radiation in W/m². Features: spectral responsivity from 315-400nm (UV-A), cosine field-of-view, for the usage with optometers and amplifiers, calibration certificate.