Used textile - Import export

Smart embroidery is one of the most well-known technologies to add functions to and integrate them in textiles. Thus, we produce intelligent textiles with our special CNC wire laying technology. Potential applications include: > textile-based electrodes > flexible antennas > textile sensors > medical devices reliant on electromagnetic coils

This protective sleeve is particularly robust and has two contact sides in this version for work on both sides. Both contact sides are coated with secutex. They are extremely resistant and minimize the buildup of wrinkles in the textile. Use of the protective sleeve is no longer necessary.

Unexcited synchronous motors Reluctance motors are used in textile machinery as drive for godets and spinning pumps. In general they are used in inverter application as single drive or group drive. Reluctance motors can be realised for any voltage/frequency ratio U/f. Speed >15.000min1 is possible. A great no. of variations concerning special shaft, flange bearing and housing is available. Reluctance motors are available for hazardous locations in flameproof design.

INOX STAIN REMOVER IX 500 is a fast and effective stain remover and removes stains from oils, greases, drinks, tars and many other types effortlessly and without leaving any residues. It is recommended for use on textiles, vehicle interiors, carpets and many other surfaces.

secutex has developed the new “TopDrain” structure surface for lifting wet or oily components. Most of the damages at sharp or rough edges are caused by the movement of the load across the sling. In the case of loads with a “sharp edge” or with a very rough surface, a protective sleeve or fixed coating must be used to protect the textile lifting sling. If the load moves sideways, a cutting movement on the edge is the result. Similar to a knife blade, the edge can cut through the fibers of the textile sling. The new “TopDrain” surface drainage provides good adhesion of the protective sleeves and the coated lifting slings even on wet and oily materials. The liquid can drain off into the surface hollows and the load lies securely in the lifting sling. The “TopDrain” structure works like a drainage and ensures the frictional connection of the secutex coating to the load.

Use biocidal products with care. Always read the label and product information before use. For sensitive materials (textiles, leather, painted surfaces), spray disinfectant onto a cloth and wipe off. Check compatibility in advance on a hidden area. When used in the food sector, rinse the surfaces with clear water afterwards. It is effective against bacteria, yeast fungi and specific viruses (limited virucidal activity). Leave on for at least 60 seconds. Do not use it in large areas. Eliminates 99.9% of bacteria and specific viruses (influenza viruses, corona viruses). Active ingredient content per 100 ml product: 65 ml ethanol & 15 ml 2-propanol. Area of Effect Bactericide according to DIN EN 13727 in 60s Levurocide according to DIN EN 13624 in 60s Limited virucidal according to DIN EN 14476 in 60s UFI: T470-6026-V006-RFR2 Biocide Reg. No.: N-86853 / N-91443 Other sizes available on request

The INOX® mineral spirits IX 200 effortlessly removes all types of dirt such as fats, oils and paint stains. The mineral spirits can be used on almost all surfaces, textiles, work equipment and many other areas of application. The INOX® mineral spirits IX 200 leaves no traces after use.

For protecting and preserving your goods, half-tubular film packing of Gordopack is your best option. Our half-tubular protective films secure various objects and packed food items during transportation, storage or handling due to their very different designs and numerous fields of application. Especially the shrink foil is preferred in this area. Another field of application for half tubular foils is, for example, as linen foil, which is mainly used in the field of textile cleaning. It offers sufficient protection against renewed contamination already during transport home. Product can range from HDPE/ MDPE/ LDPE/ PCR with straight-cut edges, perforated on roll, needled, with antistatic agent, UV-stabilizer/absorber, symbol marking, Corona treatment and in various colours.

Thickness range: 100-500 µm calendered film made of Polyvinylchlorid Application Office Equipment Automotive, Pharmaceutical Industry & Healthcare, Engineering Use, Textile & Household Industry, Packing

The use of lightweight textiles outdoors has always been a challenge. The demands on modern architecture are becoming ever greater. There is hardly a fireproof glass fabric , i.e. A2 classified, and if there is one, it is usually heavy and darkens the room. With the GLASS PREMIUM article we have developed an A2 certified membrane material that not only looks very high quality but also lets in a lot of natural light . Its coating is dirt-repellent and keeps unsightly algae/verdigris away. Glass materials not only provide a particularly high-quality appearance but also extremely high strength for membranes , for example . The fact that it is a fabric and not a tarpaulin is immediately apparent to the observer. The Stottrop GLASS PREMIUM fabric is a fireproof material that is suitable for outdoor use and also offers an intelligent shade solution .

Silicone -coated fabrics were among the first professional materials for industrial use and in textile architecture . The high flexibility and resistance to aging are good reasons for these materials. In the past, silicone fabrics were less successful due to their poor processing and often insufficient fire rating. The non- flammable GLASS SILICON A2 tarpaulin was chemically and physically redesigned from the ground up. This has enabled many problems of the past to be overcome. A real difference is that the non-flammable tarpaulin is now almost as resistant to bending . The glass fabric is almost as insensitiveas a tarpaulin ! This makes the material ideal for a wide range of applications in industry and architecture . The coating can be supplied in colour or transparent . The viewer sees a naturally diffuse light , especially in the transparent version . This makes the fabric suitable for lighting in buildings.

The used head protection textile resists liquide metal, sparks and slag. With these characteristics, it is the perfect addtion to our security cutting. in order to keep visual, thermal and dynamic effects of an arc when cutting under voltage cables to a minimum as possible . The heat protective cover protects flammable and temperature sensitive materials for welding- and shringking work. - Asbestos-free, free from hazardous substances - tissue from sicilia fiber, about 96% share of silica (amorphus Si02) - Suitable for temperatures up to 1300&°;C short term, continuous exposure to bis 1100&°;C - The product is not toxic. There is no ecologcially harmful effects known.

We supply any kind of carpet finishing and coating lines from the raw product to the finished article. Depending on the carpet type and the required drying capacity after washing, dyeing or printing, in finishing, coating or laminating BRÜCKNER offer different dryer systems. Our special DUOTHERM dryer is mainly used in textile and carpet coating lines because of many benefits. The dryer has separate air circuits, continuously controllabe via frequency inverters, a separate heating of the upper and lower dryer sections, adjustable temperature difference of up to 60°C, inversed thermo zones, 3 metre each and many more.

Tell your customers what your product is made of and how best to care for it. Anyone selling garments or consumer textiles must observe the textile labeling requirements. Our care labels are the label of choice. Whether your need a small or large quantity, with our standardized care icons, you can meet this requirement very easily. The official CE mark can also be applied to your textile label using our configuration tool. It can be found under the option "motifs" in the category "crafting motifs".

Screen printing (traditionally: serigraphy) is a printing process in which the printing ink is applied to the material through a fine-meshed textile fabric using a wiper through-printing process. The mesh openings are color-impermeable (closed) or open like a stencil. The color application can be varied through different fabric fineness and high color layer thicknesses can be achieved. Half-print machine, Max. 800 x 700mm Furthermore, we set up table screens for special requirements for you.