Used electric motors - Import export

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

Our small and industrial carbon brushes are used in many different power- and signal-transmission applications. How can we help you? The range of different dimensions and versions of small and industrial brushes is enormous: It's no wonder the quality products from MACK are used in many electrical tools, small motors, AC and DC motors, in the automotive field, and many other applications. With higher currents, such as in wind turbines and grounding systems, our metal graphite grades ensure optimum transmission. Our silver graphite carbon brushes are also used in marine shaft grounding and in signal- and data-transmission systems, for example, in tachogenerators. Do you want to make ordering small and industrial carbon brushes as fast and uncomplicated as possible? Then use our online MACK carbon brush configurator. With just a few clicks, your enquiry or order reaches us – and then is quickly sent on the way to you.

Technical information The AI 2,5-20 auto is a stripping machine driven by an electric motor. It uses a system which detects the wire diameter and selects the cutting depth. Exact stripping of different insulated wires within the cross-section range of 0.5 up to 2.5 mm² (AWG20 – 14) is possible without an additional external adjustment. The stripping length and pull-off length are very easy to adjust.

Single-stage worm gear unit for restricted installation spaces. Highly flexible in use. Available with or without electric motor. Key facts: — Nominal torques: up to 4.7 Nm — Available ratios: i = 3, i = 7, i = 10.5, i = 15, i = 21, i = 30, i = 40, i = 68, i = 110 — Efficiencies up to 79 — Low noise emissions — Food-grade gear grease, i.e. all ingredients meet USDA H1 or FDA regulations for use in the food industry Our sales team will be happy to advise you on questions or configurations - get in contact!

Arc magnet is one of the basic shapes of Neodymium magnet, also called segment magnet, they are widely used for electric motors, PM motors and generators in the electrical engineering and electric vehicles etc. Arc magnet can be made with high Hcj materials to match special motor applications, it can be consistency for torque performance and ground to meet high precision and concentric requirements.

nduction Heating and Joining in one turnkey system. This turnkey system is used to heat electric motor housings with various dimensions for a wide range of joining processes. Example Heating System 1: the die-cast aluminium housing for an asynchronous motor (diameter 450 mm) is heated to approx. 290°C in approx. 5 minutes to fit the wound stator package. The parts are loaded and unloaded from the feeding belt parallel to the working time. The heating process takes place in two independent work stations. The generator has a switched output which means that only one generator is required for the two heating stations. The system is controlled using a SIEMENS PLC controller. Example Heating System 2: the aluminium housing (diameter 140 mm) of a synchronous motor is heated to approx. 280°C in approx. 3 minutes to fit the stator. The component is loaded into and unloaded from the heating station semiautomatically. The system is controlled using a PLC.

Power units and Control Systems Ruhfus Systemhydraulik GmbH specialises in the production of special solutions in the field of hydraulic units for industrial use. In order to be able to optimise the product to meet your requirements, you will be supported during the whole project phase by our competent team. Ruhfus Systemhydraulik GmbH can supply hydraulic units with tank sizes of up to 10,000 litres capacity. For this we use DIN oil tanks but also special tanks that are individually adapted to your needs. Here it is immaterial whether the oil tank is made of steel, stainless steel or aluminium. For special designs such as table valves, tank support frames, supporting structures for motor pump units and many more special components connected with your hydraulic unit we are of course likewise the right people to contact. For each of our hydraulic units, 3D models are generated beforehand which can be made available to you. From these you can plan earlier the field piping, possible foundations or building and also transport or other matters in detail. For the drives of our hydraulic units we use standard electric motors with a power of up to 80 kW. On request the motors can also be equipped with a frequency converter. As the valve technology, as well as the oil supply unit, are always subject to customer-specific requirements, limits are always hard to define here. As far as possible only two limits should not be exceeded, on the one hand a maximum volume flow of 275 l/min and on the other a maximum system pressure of 315 bar. Furthermore we can offer you the supply of a complete system of cylinder and hydraulic unit to electric control. If you a seeking a competent partner in the “complete solution” area, we will be glad to support you with our team. 3 D Models

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW

When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

Find the suitable motor for your application: simply enter your requirements and receive suitable suggestions.

2-phase stepper motors Our 2-phase stepper motors are reliable and low-cost drives with a long service life. They are available in different sizes and types of power output, are continuously developed and are thus suitable for a variety of applications. AC servo motors The AC servo motors meet the highest demands regarding dynamics and accuracy and are used if dynamic, exact positioning or smooth running characteristics are required. The different types of power output and sizes cover the most diverse requirements. The benefits at a glance Highly dynamic High efficiency Long service life

Watercooled electric motors can be realised in any possible mechanical and electrical customised version. They can be realised in vacuum tight version for fan drive on thermal treating oven.

Electric motors are available in nearly any mechanical and electrical customised version